Optimization of shaded surface display for CT angiography.

RATIONALE AND OBJECTIVES: The authors performed this study to determine the optimum threshold for performing computed tomographic (CT) angiography with shaded surface display (SSD). MATERIALS AND METHODS: A dedicated phantom was developed with an 8-mm luminal diameter. Each of 19 vessels had stenoses ranging from 0% to 93.8%. Five blinded, experienced reviewers separately measured each vessel by using SSD with display thresholds of 50, 100, 150, and 200 HU. RESULTS: For vessel diameters of 2 mm and larger, the best threshold value was 100 HU. This yielded measurements within 2% of the actual diameter and produced no false occlusions. For vessels 1 mm in diameter, the best threshold remained 100 HU, but this threshold was significantly less accurate than the standard (P = .0001) and produced two false occlusions in 15 vessels. For vessels 0.5 mm in diameter, the best threshold was 50 HU, although this still produced measurements significantly less accurate than the gold standard (P = .036) and one false occlusion in 15 vessels. CONCLUSION: CT angiography with SSD and an optimized threshold value is a useful technique in vessels 1 mm and larger.

CT angiography: in vitro comparison of five reconstruction methods.

OBJECTIVE: Five image reconstruction techniques have been used with CT angiography: axial (cross-sectional), maximum intensity projection (MIP), curved multiplanar reconstruction (MPR), shaded-surface display, and volume rendering. This study used a phantom to compare the accuracy of these techniques for measuring stenosis. SUBJECTS AND METHODS: A 19-vessel phantom containing various grades of concentric stenoses (0-100%) and three lengths (5, 7.5, and 10 mm) of stenoses was used for this study. Scans were obtained with a slice thickness of 2.0 mm, slice interval of 1.0 mm, pitch of 1.0, 120 kVp, 200 mA, and with the vessels oriented parallel to the z-axis and opacified with nonionic contrast material. CT angiography images were produced using five optimized techniques: axial, MIP, MPR, shaded-surface display, and volume rendering; and measurements were made with an electronic cursor in the normal lumen and mid stenosis by five separate investigators who were unaware of vessel and stenosis diameters. Each of the techniques was first optimized according to the radiology literature and our own preliminary testing. RESULTS: For vessels greater than 4 mm in diameter, axial, MIP, MPR, shaded-surface display, and volume-rendering CT angiography techniques all had a measurement error of less than 2.5%. However, axial, MIP, MPR, and shaded-surface display techniques were less accurate in estimating smaller (

A comparison of wavelet and Joint Photographic Experts Group lossy compression methods applied to medical images.

This presentation focuses on the quantitative comparison of three lossy compression methods applied to a variety of 12-bit medical images. One Joint Photographic Exports Group (JPEG) and two wavelet algorithms were used on a population of 60 images. The medical images were obtained in Digital Imaging and Communications in Medicine (DICOM) file format and ranged in matrix size from 256 x 256 (magnetic resonance [MR]) to 2,560 x 2,048 (computed radiography [CR], digital radiography [DR], etc). The algorithms were applied to each image at multiple levels of compression such that comparable compressed file sizes were obtained at each level. Each compressed image was then decompressed and quantitative analysis was performed to compare each compressed-then-decompressed image with its corresponding original image. The statistical measures computed were sum of absolute differences, sum of squared differences, and peak signal-to-noise ratio (PSNR). Our results verify other research studies which show that wavelet compression yields better compression quality at constant compressed file sizes compared with JPEG. The DICOM standard does not yet include wavelet as a recognized lossy compression standard. For implementers and users to adopt wavelet technology as part of their image management and communication installations, there has to be significant differences in quality and compressibility compared with JPEG to justify expensive software licenses and the introduction of proprietary elements in the standard. Our study shows that different wavelet implementations vary in their capacity to differentiate themselves from the old, established lossy JPEG.

CT bronchoscopy: optimization of imaging parameters.

The authors evaluated the relative importance of the following scanning parameters at computed tomographic bronchoscopy in an anesthetized adult sheep's thorax: section thickness (2, 4, 8 mm), pitch (1.0, 1.5, 2.0), milliampere setting (100, 175, 250 mA), and overlap of reconstructed sections (0%, 25%, 50%, 75%). Five blinded readers ranked the images twice in comparison with photographs of the mounted specimen. Differences in image quality were significant (P < .001) with section thickness of 2 mm and a pitch of 1.0. The milliampere setting had only a minor effect on image quality, and a 50% overlap of reconstructed sections was best.