Gravimetric preparation and characterization of primary reference solutions of molybdenum and rhodium.

Gravimetrically prepared mono-elemental reference solutions having a well-known mass fraction of approximately 1 g/kg (or a mass concentration of 1 g/L) define the very basis of virtually all measurements in inorganic analysis. Serving as the starting materials of all standard/calibration solutions, they link virtually all measurements of inorganic analytes (regardless of the method applied) to the purity of the solid materials (high-purity metals or salts) they were prepared from. In case these solid materials are characterized comprehensively with respect to their purity, this link also establishes direct metrological traceability to The International System of Units (SI). This, in turn, ensures the comparability of all results on the highest level achievable. Several national metrology institutes (NMIs) and designated institutes (DIs) have been working for nearly two decades in close cooperation with commercial producers on making an increasing number of traceable reference solutions available. Besides the comprehensive characterization of the solid starting materials, dissolving them both loss-free and completely under strict gravimetric control is a challenging problem in the case of several elements like molybdenum and rhodium. Within the framework of the European Metrology Research Programme (EMRP), in the Joint Research Project (JRP) called SIB09 Primary standards for challenging elements, reference solutions of molybdenum and rhodium were prepared directly from the respective metals with a relative expanded uncertainty associated with the mass fraction of U rel(w) < 0.05 %. To achieve this, a microwave-assisted digestion procedure for Rh and a hotplate digestion procedure for Mo were developed along with highly accurate and precise inductively coupled plasma optical emission spectrometry (ICP OES) and multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS) methods required to assist with the preparation and as dissemination tools.

Reference measurement procedures for the iron saturation in human transferrin based on IDMS and Raman scattering.

Two reference measurement procedures are presented here that allow the determination of the iron saturation in human transferrin, based on different molecular properties. The results, directly derived from the number of ions bound to the protein molecule, are traceable to the SI. Up to now, the iron saturation has only been deduced indirectly from the amount-of-substance ratio of serum iron to transferrin in serum. Interlaboratory tests have shown the need for more accurate methods, as the results from many participant test samples for both parameters do not lie within the acceptable range of deviation given by relevant guidelines when different methods or kits are applied. Using isotope dilution, an HPLC ICP-MS procedure was developed in compliance with the requirements of a primary reference measurement procedure. In this manner, the iron saturation was measured with an associated relative expanded measurement uncertainty of 4%. Based on the results, a straightforward Raman procedure was evolved, which allows the determination of the iron saturation in transferrin with an associated relative expanded uncertainty of 7%.