Unique Substrate Specificity of SplE Serine Protease from Staphylococcus aureus.

Staphylococcus aureus is a dangerous human pathogen characterized by alarmingly increasing antibiotic resistance. Accumulating evidence suggests the role of Spl proteases in staphylococcal virulence. Spl proteases have restricted, non-overlapping substrate specificity, suggesting that they may constitute a first example of a proteolytic system in bacteria. SplA, SplB, and SplD were previously characterized in terms of substrate specificity and structural determinants thereof. Here we analyze the substrate specificity of SplE documenting its unique P1 preference among Spl proteases and, in fact, among all chymotrypsin-like (family S1) proteases characterized to date. This is interesting since our understanding of the general aspects of proteolysis is based on seminal studies of S1 family members. To better understand the molecular determinants of the unusual specificity of SplE, the crystal structure of the protein is determined here. Conclusions from structural analysis are evaluated by successful grafting of SplE specificity on the scaffold of SplB protease.

Tuning cellular response by modular design of bioactive domains in collagen.

Collagen's ability to direct cellular behavior suggests that redesigning it at the molecular level could enable manipulation of cells residing in an engineered microenvironment. However, the fabrication of full-length collagen mimics of specified sequence de novo has been elusive, and applications still rely on material from native tissues. Using a bottom-up strategy, we synthesized modular genes and expressed recombinant human collagen variants in Saccharomyces cerevisiae. The resulting biopolymers contained prescribed cell-interaction sites that can direct and tune cellular responses, with retention of the important triple-helical self-assembled structure. Removal of the native integrin-binding sites GROGER, GAOGER, GLOGEN, GLKGEN, and GMOGER in human collagen III yielded collagen that did not support adhesion of mammalian cells. Introduction of GFOGER sequences to this scaffold at specified locations and densities resulted in varying degrees of cellular attachment. The recruitment of focal adhesion complexes on the different collagens ranged from a 96% reduction to a 56% increase over native collagen I. Adhesion to the GFOGER-containing variants was entirely dependent and partially dependent on the ß1 and α2 subunits of integrin, respectively, with cell adhesion on average reduced by 86% with anti-ß1 and 38% with anti-α2 integrin antibody incubation. Results support the importance of local context in collagen-cell interactions. The investigation demonstrates the flexibility of this approach to introduce targeted changes throughout the collagen polymer for producing fully-prescribed variants with tailored properties.

Nanoscale architecture and cellular adhesion of biomimetic collagen substrates.

The ability to engineer bioactive sites within the biopolymer collagen has significant potential to dictate cellular microenvironments and processes. We have developed a novel recombinant DNA platform that enables such molecular-level control over this important material. In this investigation, we demonstrated the production of synthetic human collagen using yeast strains that were engineered with human prolyl hydroxylase α and ß genes integrated into the genome and a codon-optimized collagen gene carried on a plasmid. To understand the extent to which this synthetic collagen can mimic native human collagen, we examined the relationships between the structural topology and physical stability with the ability to support adhesion of HT-1080 cells. Characterization of these biopolymers included evaluation using circular dichroism spectroscopy, atomic force microscopy, and MTT metabolic activity assays. Although the apparent melting temperatures of the recombinant collagens were ∼3-5 less than native sources, the recombinant and native collagens exhibited comparable triple helical structure, polymeric dimensions, adsorption on polystyrene, and cellular adhesion properties below their respective melting temperature values. These results support the feasibility of producing molecularly-engineered collagens that can mimic native substrates for therapeutic and tissue engineering applications.

Biochemical and structural characterization of SplD protease from Staphylococcus aureus.

Staphylococcus aureus is a dangerous human pathogen. A number of the proteins secreted by this bacterium are implicated in its virulence, but many of the components of its secretome are poorly characterized. Strains of S. aureus can produce up to six homologous extracellular serine proteases grouped in a single spl operon. Although the SplA, SplB, and SplC proteases have been thoroughly characterized, the properties of the other three enzymes have not yet been investigated. Here, we describe the biochemical and structural characteristics of the SplD protease. The active enzyme was produced in an Escherichia coli recombinant system and purified to homogeneity. P1 substrate specificity was determined using a combinatorial library of synthetic peptide substrates showing exclusive preference for threonine, serine, leucine, isoleucine, alanine, and valine. To further determine the specificity of SplD, we used high-throughput synthetic peptide and cell surface protein display methods. The results not only confirmed SplD preference for a P1 residue, but also provided insight into the specificity of individual primed- and non-primed substrate-binding subsites. The analyses revealed a surprisingly narrow specificity of the protease, which recognized five consecutive residues (P4-P3-P2-P1-P1') with a consensus motif of R-(Y/W)-(P/L)-(T/L/I/V)↓S. To understand the molecular basis of the strict substrate specificity, we crystallized the enzyme in two different conditions, and refined the structures at resolutions of 1.56 Å and 2.1 Å. Molecular modeling and mutagenesis studies allowed us to define a consensus model of substrate binding, and illustrated the molecular mechanism of protease specificity.

Identification of protease exosite-interacting peptides that enhance substrate cleavage kinetics.

Many peptidases are thought to require non-active site interaction surfaces, or exosites, to recognize and cleave physiological substrates with high specificity and catalytic efficiency. However, the existence and function of protease exosites remain obscure owing to a lack of effective methods to identify and characterize exosite-interacting substrates. To address this need, we modified the cellular libraries of peptide substrates (CLiPS) methodology to enable the discovery of exosite-interacting peptide ligands. Invariant cleavage motifs recognized by the active sites of thrombin and caspase-7 were displayed on the outer surface of bacteria adjacent to a candidate exosite-interacting peptide. Exosite peptide libraries were then screened for ligands that accelerate cleavage of the active site recognition motif using two-color flow cytometry. Exosite CLiPS (eCLiPS) identified exosite-binding peptides for thrombin that were highly similar to a critical exosite interaction motif in the thrombin substrate, protease-activated receptor 1. Protease activity probes incorporating exosite-binding peptides were cleaved ten-fold faster than substrates without exosite ligands, increasing their sensitivity to thrombin activity in vitro. For comparison, screening with caspase-7 yielded peptides that modestly enhanced (two-fold) substrate cleavage rates. The eCLiPS method provides a new tool to profile the ligand specificity of protease exosites and to develop improved substrates.

Site-specific targeting of antibody activity in vivo mediated by disease-associated proteases.

As a general strategy to selectively target antibody activity in vivo, a molecular architecture was designed to render binding activity dependent upon proteases in disease tissues. A protease-activated antibody (pro-antibody) targeting vascular cell adhesion molecule 1 (VCAM-1), a marker of atherosclerotic plaques, was constructed by tethering a binding site-masking peptide to the antibody via a matrix metalloprotease (MMP) susceptible linker. Pro-antibody activation in vitro by MMP-1 yielded a 200-fold increase in binding affinity and restored anti-VCAM-1 binding in tissue sections from ApoE⁻/⁻ mice ex vivo. The pro-antibody was efficiently activated by native proteases in aorta tissue extracts from ApoE⁻/⁻, but not from normal mice, and accumulated in aortic plaques in vivo with enhanced selectivity when compared to the unmodified antibody. Pro-antibody accumulation in aortic plaques was MMP-dependent, and significantly inhibited by a broad-spectrum MMP inhibitor. These results demonstrate that the activity of disease-associated proteases can be exploited to site-specifically target antibody activity in vivo.

Substrate specificity of Staphylococcus aureus cysteine proteases--Staphopains A, B and C.

Human strains of Staphylococcus aureus secrete two papain-like proteases, staphopain A and B. Avian strains produce another homologous enzyme, staphopain C. Animal studies suggest that staphopains B and C contribute to bacterial virulence, in contrast to staphopain A, which seems to have a virulence unrelated function. Here we present a detailed study of substrate preferences of all three proteases. The specificity of staphopain A, B and C substrate-binding subsites was mapped using different synthetic substrate libraries, inhibitor libraries and a protein substrate combinatorial library. The analysis demonstrated that the most efficiently hydrolyzed sites, using Schechter and Berger nomenclature, comprise a P2-Gly↓Ala(Ser) sequence motif, where P2 distinguishes the specificity of staphopain A (Leu) from that of both staphopains B and C (Phe/Tyr). However, we show that at the same time the overall specificity of staphopains is relaxed, insofar as multiple substrates that diverge from the sequences described above are also efficiently hydrolyzed.

Directed evolution of protease beacons that enable sensitive detection of endogenous MT1-MMP activity in tumor cell lines.

Directed evolution was applied to identify peptide substrates with enhanced hydrolysis rates by MT1-MMP suitable for protease beacon development. Screening of a random pentapeptide library, using two-color CLiPS, yielded several substrates identical to motifs in distinct collagens that shared the consensus sequence P-x-G↓L. To identify substrates with enhanced cleavage rates, a second-generation decapeptide library incorporating the consensus was screened under stringent conditions, which resulted in a MxPLG↓(M)/(L)M(G)/(A)R consensus motif. These substrates are hydrolyzed by human-MT1-MMP up to six times faster than reported peptide substrates and are stable in plasma. Finally, incubation of soluble protease beacons incorporating the optimized substrates, but not previous substrates, enabled direct detection of endogenous MT1-MMP activity of human-fibrosarcoma (HT-1080) cells. Extended substrate libraries coupled with CLiPS should be useful to generate more effective activity probes for a variety of proteolytic enzymes.

Evolutionary optimization of peptide substrates for proteases that exhibit rapid hydrolysis kinetics.

Protease cleavage site recognition motifs can be identified using protease substrate discovery methodologies, but typically exhibit non-optimal specificity and activity. To enable evolutionary optimization of substrate cleavage kinetics, a two-color cellular library of peptide substrates (CLiPS) methodology was developed. Two-color CLiPS was applied to identify peptide substrates for the tobacco etch virus (TEV) protease from a random pentapeptide library, which were then optimized by screening of a focused, extended substrate library. Quantitative library screening yielded seven amino acid substrates exhibiting rapid hydrolysis by TEV protease and high sequence similarity to the native seven-amino-acid substrate, with a strong consensus of EXLYPhiQG. Comparison of hydrolysis rates for a family of closely related substrates indicates that the native seven-residue TEV substrate co-evolved with TEV protease to facilitate highly efficient hydrolysis. Consensus motifs revealed by screening enabled database identification of a family of related, putative viral protease substrates. More generally, our results suggest that substrate evolution using CLiPS may be useful for optimizing substrate selectivity and activity to enable the design of more effective protease activity probes, molecular imaging agents, and prodrugs.

A novel matrix metalloprotease-like enzyme (karilysin) of the periodontal pathogen Tannerella forsythia ATCC 43037.

Proteases of Tannerella forsythia, a pathogen associated with periodontal disease, are implicated as virulence factors. Here, we characterized a matrix metalloprotease (MMP)-like enzyme of T. forsythia referred to as karilysin. Full-length (without a signal peptide) recombinant karilysin (49.9 kDa) processed itself into the mature 18-kDa enzyme through sequential autoproteolytic cleavage at both N- and C-terminal profragments. The first cleavage at the Asn14-Tyr15 peptide bond generated the fully active enzyme (47.9 kDa) and subsequent truncations at the C-terminus did not affect proteolytic activity. Mutation of Tyr15 to Ala generated a prokarilysin variant that processed itself into the final 18-kDa form with greatly reduced kinetics. Inactive prokarilysin with the mutated catalytic Glu residue (E136A) was processed by active karilysin at the same sites as the active enzymes. Karilysin proteolytic activity and autoprocessing were inhibited by 1,10-phenanthroline and EDTA. Calcium ions were found to be important for both the activity and thermal stability of karilysin. Using CLiPS technology, the specificity of karilysin was found to be similar to that of MMPs with preference for Leu/Tyr/Met at P1' and Pro/Ala at P3. This specificity and the ability to degrade elastin, fibrinogen and fibronectin may contribute to the pathogenicity of periodontitis.

Intracellular protein interaction mapping with FRET hybrids.

A quantitative methodology was developed to identify protein interactions in a broad range of cell types by using FRET between fluorescent proteins. Genetic fusions of a target receptor to a FRET acceptor and a large library of candidate peptide ligands to a FRET donor enabled high-throughput optical screening for optimal interaction partners in the cytoplasm of Escherichia coli. Flow cytometric screening identified a panel of peptide ligands capable of recognizing the target receptors in the intracellular environment. For both SH3 and PDZ domain-type target receptors, physiologically meaningful consensus sequences were apparent among the isolated ligands. The relative dissociation constants of interacting partners could be measured directly by using a dilution series of cell lysates containing FRET hybrids, providing a previously undescribed high-throughput approach to rank the affinity of many interaction partners. FRET hybrid interaction screening provides a powerful tool to discover protein ligands in the cellular context with potential applications to a wide variety of eukaryotic cell types.