RESUMO
Chemicals manufacture is among the top greenhouse gas contributors. More than half of the associated emissions are attributable to the sum of ammonia plus oxygenates such as methanol, ethylene glycol and terephthalic acid. Here we explore the impact of electrolyzer systems that couple electrically-powered anodic hydrocarbon-to-oxygenate conversion with cathodic H2 evolution reaction from water. We find that, once anodic hydrocarbon-to-oxygenate conversion is developed with high selectivities, greenhouse gas emissions associated with fossil-based NH3 and oxygenates manufacture can be reduced by up to 88%. We report that low-carbon electricity is not mandatory to enable a net reduction in greenhouse gas emissions: global chemical industry emissions can be reduced by up to 39% even with electricity having the carbon footprint per MWh available in the United States or China today. We conclude with considerations and recommendations for researchers who wish to embark on this research direction.
RESUMO
The electrolysis of carbon capture solutions bypasses energy-intensive CO2 recovery steps that are often required to convert CO2 into value-added products. We report herein an electrochemical flow reactor that converts carbon capture solutions containing carbonic anhydrase enzymes into carbon-based products. Carbonic anhydrase enzymes benefit CO2 capture by increasing the rate of reaction between CO2 and weakly alkaline solutions by 20-fold. In this study, we reduced CO2-enriched bicarbonate solutions containing carbonic anhydrase ("enzymatic CO2 capture solutions") into CO at current densities of 100 mA cm-2. This result demonstrated how to electrolyse enzymatic CO2 capture solutions, but the selectivity for CO production was two-thirds less than bicarbonate solutions without carbonic anhydrase. This reduction in performance occurred because carbonic anhydrase deactivated the catalyst surface. A carbon microporous layer was found to suppress this deactivation.
Assuntos
Anidrases Carbônicas , Bicarbonatos , Carbono , Dióxido de Carbono , EletróliseRESUMO
Regioselectively substituted nanocellulose was synthesized by protecting the primary hydroxyl group. Herein, we took advantage of the different reactivities of primary and secondary hydroxyl groups to graft large capping structures. This study mainly focuses on regioselective installation of trityl protecting groups on nanocellulose chains. The elemental analysis and nuclear magnetic resonance spectroscopy of regioselectively substituted nanofibrillated cellulose (NFC) suggested that the trityl group was successfully grafted in the primary hydroxyl group with a degree of substitution of nearly 1. Hansen solubility parameters were employed, and the binary system composed of an ionic liquid and pyridine as a base was revealed to be the optimum condition for regioselective functionalization of nanocellulose. Interestingly, the dissolution of NFC in the ionic liquid and the subsequent deprotection process of NFC substrates hardly affected the crystalline structure of NFC (3.6% decrease in crystallinity). This method may provide endless possibilities for the design of advanced engineered nanomaterials with multiple functionalities. We envisage that this protection/deprotection approach may lead to a bright future for the fabrication of multifunctional devices based on nanocellulose.
Assuntos
Nanofibras , Nanoestruturas , Celulose/química , Nanofibras/química , Nanoestruturas/química , SolubilidadeRESUMO
Photoresponsive functionalized nanofilms were prepared via radical polymerization of carbazole units on a nanofibrillated cellulose (NFC) backbone via one-pot procedure. Herein, NFC was functionalized with active carbazole units as pendant organic moieties. The nanofilms were characterized by UV-vis and fluorescence spectroscopy, Fourier transformed infrared (FTIR) and Raman spectroscopy, 13C NMR and proton NMR spectra, contact angle analysis, mechanical testing, and scanning electron microscopy (SEM). The fabricated nanofilms exhibited large tensile strength (â¼110 MPa), higher hydrophobicity and luminescence activity. The results indicated that the prepared optically active nanofilms present potential applications in the fields of flexible organic light emitting devices.
Assuntos
Carbazóis/química , Celulose/química , Nanofibras/química , Compostos de Vinila/química , Interações Hidrofóbicas e Hidrofílicas , Luminescência , Microscopia Eletrônica de Varredura/métodos , Polimerização , Polímeros/química , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Análise Espectral Raman/métodos , Resistência à TraçãoRESUMO
This research work is the first to report thermal stability, heat deformation resistance, and crystallization behavior of a Polyethylene (PE)-based biphasic polyolefin system reinforced with Reduced Graphene Oxide (RGO), which was obtained through Graphene Oxide (GO) chemical reduction. Polypropylene (PP) represented the polymeric dispersed phase. A strategic PE/PP/RGO manufacturing procedure was employed to thermodynamically localize RGO at the PE/PP interface, as confirmed by Transmission Electron Microscopy (TEM), bringing a uniform micro phase dispersion into the macro phase. In addition, studies of PE non-isothermal crystallization kinetics indicated that the morphology tunable micro phase and the nanolayered RGO promoted a nucleation-controlled PE crystallization, which was supported by Polarized Light Optical Microscopy (PLOM). This, together with fine morphology, justified the remarkable enhancement registered for the ternary system's thermal stability and heat deformation resistance. Different filler loads were employed, with weight fractions of 2% and 4%. It was observed that the former, being better exfoliated and more homogeneously distributed at the PE/PP interface than the latter, led to a more improved PE crystallization, alongside a greater ternary system's thermal properties. Moreover, the thermal stability of PE/PP reinforced with 2% of RGO was even higher than that of virgin PP, while their heat deformation resistance values were found to be similar. Therefore, this unique outcome provides industries, such as the energy and automotive sectors, with the opportunity to substitute PP-rich products with those mostly comprised of a cheaper, more abundant, yet performant PE.
RESUMO
Over the span of the past decade, carbon dots (CDs) synthesized from renewable organic resources (organic CDs) have gathered a considerable amount of attention for their photoluminescent properties. This review will focus on organic CDs synthesized using clean chemistry and conventional synthetic chemistry from organic sources and their fluorescence mechanisms, such as quantum confinement effect and surface/edge defects, before outlining their performance in electronic applications, including organic photovoltaic devices, organic light-emitting devices, biosensors, supercapacitors, and batteries. The various organic resources and methods of organic CDs synthesis are briefly covered. Many challenges remain before the adoption of CDs can become widespread; their characterization, structure, functionality, and exact photoluminescent mechanism all require additional research. This review aims to summarize the current research outcomes and highlight the area where further research is needed to fully use these materials.
RESUMO
Electrocatalytic transformation of carbon dioxide (CO2) and water into chemical feedstocks offers the potential to reduce carbon emissions by shifting the chemical industry away from fossil fuel dependence. We provide a technoeconomic and carbon emission analysis of possible products, offering targets that would need to be met for economically compelling industrial implementation to be achieved. We also provide a comparison of the projected costs and CO2 emissions across electrocatalytic, biocatalytic, and fossil fuel-derived production of chemical feedstocks. We find that for electrosynthesis to become competitive with fossil fuel-derived feedstocks, electrical-to-chemical conversion efficiencies need to reach at least 60%, and renewable electricity prices need to fall below 4 cents per kilowatt-hour. We discuss the possibility of combining electro- and biocatalytic processes, using sequential upgrading of CO2 as a representative case. We describe the technical challenges and economic barriers to marketable electrosynthesized chemicals.
RESUMO
Bamboo-derived biocarbon (BA900) and wood-derived biocarbon (THOC700) have exhibited graphite-like characteristics through transmission electron microscopy, X-ray diffraction (XRD), and Attenuated Total Reflectance (ATR) spectroscopy analysis. Lightweight composites of biocarbons were manufactured by a mechanism of shear controlled melt-phase mixing, ensuring the preservation of biocarbon pore structures and simultaneously taking full advantage of low density polyolefin substrates. Effective tensile strength was improved by approximately 10% in the polypropylene-based bamboo carbon composite, whereas no appreciable improvement was observed in the tensile and impact strength of bamboo-derived biocarbon formulations compared to neat polymer. However, the tensile and flexural moduli and flexural strength of the THOC700-PP composites were significantly enhanced, by 56%, 67%, and 19%, respectively, compared to neat polymer. The most significant finding of the investigation was the retention of density in polyolefin polymer (ρPPâ¯=â¯0.91; ρTHOCâ¯=â¯0.95; ρBA900â¯=â¯0.99), with enhanced mechanical performance useful for lightweighting applications. Bamboo biocarbon provides a viable alternative to another abundantly available industrial carbon feedstock, reclaimed carbon fiber (RCF), in manufacturing thermoplastic composites. The origin of the carbon plays an important role in defining ultimate composite performance. A mechanism for retaining lightweight structural performance has been proposed in this original work, paving the way to develop next-generation lightweight thermoplastic structures for transportation and other industrial and consumer products.
Assuntos
Fibra de Carbono , Materiais de Construção , Carbono , Grafite , Teste de Materiais , Microscopia Eletrônica de Varredura , Microscopia Eletrônica de Transmissão , Polímeros , Polipropilenos , Porosidade , Resistência à Tração , Madeira , Difração de Raios XRESUMO
Natural gas is a robust and environmentally friendlier alternative to oil resources for energy and chemicals production. However, gas is distributed globally within shales and hydrates, which are generally remote and difficult reserves to produce. The accessibility, transportation, and distribution, therefore, bring major capital costs. With today's low and foreseen low price of natural gas, conversion of natural gas to higher value-added chemicals is highly sought by industry. Dry reforming of methane (DRM) is a technology pathway to convert two critical greenhouse gas components, CH4 and CO2, to syngas, a commodity chemical feedstock. To date, the challenges of carbon deposition on the catalyst and evolution of secondary gas-phase products have prevented the commercial application of the DRM process. The recent exponential growth of renewable electricity resources, wind and solar power, provides a major opportunity to activate reactions by harnessing low-cost carbon-free energy via microwave-heating. This study takes advantage of differences in dielectric properties of materials to enable selective heating by microwave to create a large thermal gradient between a catalyst surface and the gas phase. Consequently, the reaction kinetics at the higher temperature catalyst surface are promoted while the reactions of lower temperature secondary gas-phase are reduced.
RESUMO
Tin monosulfide (SnS) is an emerging thin-film absorber material for photovoltaics. An outstanding challenge is to improve carrier lifetimes to >1 ns, which should enable >10% device efficiencies. However, reported results to date have only demonstrated lifetimes at or below 100 ps. In this study, we employ defect modeling to identify the sulfur vacancy and defects from Fe, Co, and Mo as most recombination-active. We attempt to minimize these defects in crystalline samples through high-purity, sulfur-rich growth and experimentally improve lifetimes to >3 ns, thus achieving our 1 ns goal. This framework may prove effective for unlocking the lifetime potential in other emerging thin-film materials by rapidly identifying and mitigating lifetime-limiting point defects.