Optical design of a light-emitting diode lamp for a maritime lighthouse.

Traffic signaling is an emerging field for light-emitting diode (LED) applications. This sustainable power-saving illumination technology can be used in maritime signaling thanks to the recently updated norms, where the possibility to utilize LED sources is explicitly cited, and to the availability of high-power white LEDs that, combined with suitable lenses, permit us to obtain well-collimated beams. This paper describes the optical design of a LED-based lamp that can replace a traditional lamp in an authentic marine lighthouse. This source recombines multiple separated LEDs realizing a quasi-punctual localized source. Advantages can be lower energy consumption, higher efficiency, longer life, fewer faults, slower aging, and minor maintenance costs. The proposed LED source allows us to keep and to utilize the old Fresnel lenses of the lighthouse, which very often have historical value.

Carbon nanohorns-based nanofluids as direct sunlight absorbers.

The optimization of the poor heat transfer characteristics of fluids conventionally employed in solar devices are at present one of the main topics for system efficiency and compactness. In the present work we investigated the optical and thermal properties of nanofluids consisting in aqueous suspensions of single wall carbon nanohorns. The characteristics of these nanofluids were evaluated in view of their use as sunlight absorber fluids in a solar device. The observed nanoparticle-induced differences in optical properties appeared promising, leading to a considerably higher sunlight absorption. We found that the thermal conductivity of the nanofluids was higher than pure water. Both these effects, together with the possible chemical functionalization of carbon nanohorns, make this new kind of nanofluids very interesting for increasing the overall efficiency of the sunlight exploiting device.

Factors influencing pricking pain threshold using a CO2 laser.

The purpose of this study was the evaluation of the best experimental conditions in healthy subjects for the measurement of the minimal thermal energy density E1 which induced pricking pain on the volar surface of the left forearm by means of CO2 laser pulses. E1 was measured on a well-defined area, using laser pulses of different durations and constant power P. The dependence of E1 on the stimulus power P, the size A of the radiated area and the surface temperature T(e) were explored. In the first part of the study, these relations were obtained using a computer program, from the calculated spatio-temporal distribution of the skin temperature during, and following, a laser pulse which caused pricking pain. The second part studied a set of subsequent measurements carried out on a group of five healthy trained subjects and agreed only in part with the calculated data. We found that the measurement error on E(t) was less than 10% with P between 1.5 and 3 W, and A between 0.15 and 0.25 cm2, respectively. The influence of sensitization and adaptation phenomena on the measured data was also explored. We also show a rhythmic annual change of T(e) and E1.

Optimal phase filtering for high-power laser array far-field distribution.

We present numerical simulations of the propagation of the field emitted by laser arrays consisting of a small number of elements. Our computations show how propagation transforms part of an amplitude modulation into a phase modulation. This fact can be used to enhance the central lobe energy in the far field of high-power laser arrays by means of a simple corrective optical element. We discuss optimal filtering conditions and prove that the quarter-Talbot distance generally used in previous studies is not the best choice.