Long-term stability of cellulose acetate butyrate thin films for nuclear certified reference materials.

Characterization of cellulose acetate butyrate (CAB) thin films with 17, 35 and 52 wt% butyryl is carried out to select the most suitable matrix material for the U and Pu containing large-sized dried spike reference material. The virgin CAB samples were aged by vibrations, heat, humidity, UV light and X-rays. Characterization was done by thermo-analytical techniques, gel permeation chromatography, mechanical tests and via Rayleigh and Compton scattering. The results show that CAB with lower butyryl content can withstand higher operational temperatures and has greater mechanical strength while CAB with higher butyryl content seems to be more resistant to radiation.

IRMM-1000a and IRMM-1000b uranium reference materials certified for the production date. Part I: methodology, preparation and target characteristics.

The paper describes the preparation and production of the reference materials, IRMM-1000a and IRMM-1000b, certified for the production date based on the 230Th/234U radiochronometer in compliance with ISO Guide 34:2009. The production date of the reference materials corresponds to the last separation of 230Th from 234U, i.e. when the initial daughter nuclide content in the material was finally removed. For the preparation low-enriched uranium was used, which was purified using a unique methodology to guarantee high U recovery and Th separation efficiency. The CRM is intended for calibration, quality control, and assessment of method performance in nuclear forensics and safeguards.

Sequential determination of Pu and Am radioisotopes in environmental samples; a comparison of two separation procedures.

Two separation methods for the sequential determination of Am and Pu radionuclides are presented and the results obtained are compared. Analysis involves leaching the sample with concentrated nitric acid (HNO(3)), followed by radiochemical separation using extraction chromatographic resins (UTEVA, TRU) and anion exchange. Sources for alpha spectrometry were prepared by micro-precipitation on neodymium fluoride (NdF(3)). The chemical recoveries were determined using (242)Pu and (243)Am tracers. The methods were tested on reference materials and on two sediments. All the results were in good agreement with the reference values. The evaluation of uncertainty is also included.