Choline chloride-based deep eutectic solvents as plasticizer and active agent in chitosan films.

The growing concern over extending the shelf life of food products, coupled with the escalating environmental impact of synthetic plastic waste, has fuelled a quest for bio-based alternatives in packaging research. In response to this pressing need, our study delves into the synthesis of chitosan-based films incorporating a deep eutectic solvents (DES). Choline chloride and diverse hydrogen bond donors were used as plasticizers, we also explored the active properties of DES integrated into the chitosan (Ch) matrix. The Ch-based films with chlorine chloride: citric acid can prevent the mold spotting up to 29 days longer in comparison to bread wrapped in polyethylene films (PE). The obtained Ch/DES films exhibited mechanical properties comparable to conventional PE (e.g., up to tensile strength of 26 MPa and up to 210% in case of elongation at break). This synthesis approach represents a significant stride towards environmentally friendly packaging materials, aligning with the principles of green chemistry.

The adenine-modified edible chitosan films containing choline chloride and citric acid mixture.

A series of biopolymeric chitosan-based (Ch) films were prepared with choline chloride and citric acid plasticizer (deep eutectic solvent, DES). An effect of adenine (A, vitamin B4) addition on the functional properties of these films was evaluated. Several physicochemical and mechanical properties were tested: Fourier-transformed infrared spectra proved DES's plasticizing and crosslinking effect, while scanning electron microscopy and atomic force microscopy techniques confirmed the possible phase separation after adenine addition. These changes affected the mechanical characteristics and the water vapor and oxygen permeability. The prepared materials are not water soluble because the CA acts as a crosslinker. The adenine addition on antioxidative and antimicrobial properties was also checked. It was found that Ch-DES materials with A exhibit improved antioxidative properties (55.8-66.1% of H2O2 scavenging activity) in contrast to the pristine chitosan-DES material (51.1% of H2O2 scavenging activity), while the material is still non-mutagenic (lack of growth of Salmonella typhimurium) and possesses antimicrobial features (no E. coli observed for all the tested films and inhibition zones noted for S. aureus). The mentioned properties, reduced oxygen transmission (1.6-2.1 g m-2 h-1), and mechanical characteristics within the range of typical food packaging plastics proved the potential of Ch-DES-A films in the packaging sector. Moreover, the antioxidative properties, usage of substrates being allowed as food additives, and the presence of adenine create the advantage of the Ch-DES-A materials as edible coatings, being also a source of Vitamin B4.

Development and characterization of active packaging films based on chitosan, plasticizer, and quercetin for repassed oil storage.

Novel chitosan (Ch) films containing choline chloride and citric acid mixture as plasticizer (deep eutectic solvent, DES) and different amounts of quercetin (QUE) as antioxidant additive were prepared. Physicochemical and mechanical characteristics of the developed Ch/DES/QUE films were studied using FTIR, SEM, and AFM techniques. FTIR spectra revealed the possible interactions between all the components. The surface of the films was dense and rough. The addition of quercetin caused an increase in the tensile strength (TS) and Young's modulus, but significantly decreased the elongation at break. The films containing quercetin showed improved antioxidant activity in relation to Ch/DES film. Finally, the oxidation phenomena of rapeseed oils with and without chitosan films were evaluated as amounts of primary and secondary oxidation products and total oxidation index. The addition of Ch/DES films with quercetin to oil samples successfully retarded secondary lipid oxidation processes and improved its antioxidant activity under the accelerated storage condition.

FLUKA Simulations of Kß/Kα Intensity Ratios of Copper in Ag-Cu Alloys.

The numerical simulations of Cu Kα and Cu Kß fluorescence lines induced by Rh X-ray tube and by monoenergetic radiation have been presented. The copper Kß/Kα intensity ratios for pure elements as well as for Ag-Cu alloys have been modeled. The results obtained by use of the FLUKA code, based on the Monte-Carlo approach, have been compared to available experimental and theoretical values. A visible relationship was found between the simulated Kß/Kα intensity ratios and the copper content of the Ag-Cu alloy: as the Cu content increases, the Kß/Kα coefficient decreases. The results can play role in elemental material analysis, especially in archaeometry.

Examining the Impact of Squaric Acid as a Crosslinking Agent on the Properties of Chitosan-Based Films.

Hydrogels based on chitosan are very versatile materials which can be used for tissue engineering as well as in controlled drug delivery systems. One of the methods for obtaining a chitosan-based hydrogel is crosslinking by applying different components. The objective of the present study was to obtain a series of new crosslinked chitosan-based films by means of solvent casting method. Squaric acid-3,4-dihydroxy-3-cyclobutene-1,2-dione-was used as a safe crosslinking agent. The effect of the squaric acid on the structural, mechanical, thermal, and swelling properties of the formed films was determined. It was established that the addition of the squaric acid significantly improved Young's modulus, tensile strength, and thermal stability of the obtained materials. Moreover, it should be stressed that the samples consisting of chitosan and squaric acid were characterized by a higher swelling than pure chitosan. The detailed characterization proved that squaric acid could be used as a new effective crosslinking agent.

The role of a deep eutectic solvent in changes of physicochemical and antioxidative properties of chitosan-based films.

In this work deep eutectic solvent (DES), based on the mixture of choline chloride and lactic acid, were suggested as chitosan films plasticizers. The molecular structure and properties of films obtained using chitosan, with different degree of deacetylation and 0-80 wt.% DES content (ωDES), were studied by means of FTIR spectroscopy, SEM and AFM microscopy (films' surface properties) together with optical characteristics, water vapor transmission rate (WVTR), water vapor permeability (WVP), tensile strength (TS) and elongation at break (Eb). Scanning electron micrographs revealed that all chitosan-DES films were smooth and uniform. DES significantly improves the film flexibility (Eb increases of ca. 160 % after incorporation of 80 wt.% DES), slightly decreases tensile strength and also improves antioxidative properties while simultaneously, increasing water vapor permeability (WVP). Films prepared in this study exhibit characteristics that qualify them for potential use as an active packaging material.

Antibacterial Films Based on PVA and PVA-Chitosan Modified with Poly(Hexamethylene Guanidine).

In this study, thin, polymeric films consisting of poly(vinyl alcohol) (PVA) and chitosan (Ch) with the addition of poly(hexamethylene guanidine) (PHMG) were successfully prepared. The obtained materials were analyzed to determine their physicochemical and biocidal properties. In order to confirm the structure of PHMG, nuclear magnetic resonance spectroscopy (1H NMR) was applied, while in the case of the obtained films, attenuated total reflectance infrared spectroscopy with Fourier transform (FTIR-ATR) was used. The surface morphology of the polymer films was evaluated based on atomic force microscopy. Furthermore, the mechanical properties, color changes, and thermal stability of the obtained materials were determined. Microbiological tests were performed to evaluate the biocidal properties of the new materials with and without the addition of PHMG. These analyses confirmed the biocidal potential of films modified by PHMG and allowed for comparisons of their physicochemical properties with the properties of native films. In summary, films consisting of PVA and PHMG displayed higher antimicrobial potentials against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria in comparison to PVA:Ch-based films with the addition of PHMG.

Neutron radiography as a diagnostic tool in human osteology.

X-ray radiography (XR) is a standard imaging tool in human osteology. Here we compare a series of human bone and tooth images taken using both X-ray and thermal neutron radiography (TNR) to identify the possible applications of the latter method. The TNR imaging is superior in case of bones contaminated with soil, and combined TNR and XR images may be used to find the areas with high proportion of organic fraction (i.e., collagen) in bone and dentin.

Estimation of collagen presence in dry bone using combined X-ray and neutron radiography.

Thermal neutron radiography and X-ray radiography are characterised by different penetration depths in various materials, for example in collagen and hydroxyapatite, two major components of bone. Neutron radiography penetrates hydroxyapatite easier than collagen and, conversely, in X-ray radiography attenuation is higher in hydroxyapatite than in collagen. This effect allows estimation of collagen presence in dry bone. In our study we show that differences between the two imaging methods are sufficient to produce significant results when bone areas with higher and lower content of collagen are being compared.