RESUMO
Textile sludge is a by-product produced during the wastewater treatment process in the textile printing and dyeing industry. Textile sludge is rich in heavy metal elements, which makes it a potential risk to the surrounding environment. This study designs a magnesium oxychloride cement (MOC) components to solidify harmful substances in textile sludge and studies the influence of textile sludge ash (TSA) on the mechanical properties and microstructure of MOC samples. The results indicated that adding 5 %-20 % TSA is beneficial for increasing the compressive strength of air-cured MOC paste and improving its water resistance. Meanwhile, the MOC sample shows volume expansion in 168 h, which is related to the further hydration of residual MgO. Incorporating 10 %-20 % TSA substantially increased the volume expansion ratio of the mixture compared to plain MOC sample. In addition, the porosity of TSA-modified MOC after water curing did not change significantly compared to the sample before water curing, while the pore structure of plain MOC after water curing significantly coarsened. This is mainly because TSA reacts with MOC and generates Mg-Al-Cl-Si-H and Mg-Cl-Si-H gels, consequently improving the water stability of MOC sample. At the nanoscale, the 3/5-phase crystal and unreacted MgO content in the 15 % TSA-modified MOC sample is relatively reduced by 7.79 % and 25 %, respectively, compared to the plain sample, but the 13 % gel phase is detected. In addition, the MOC component can effectively solidify heavy metal elements in textile sludge. For the leachate of 20 % TSA-modified MOC paste, the Ni element is not detected, and its solidifying effect on heavy elements such as Zn and Mn exceeded 99 %.
RESUMO
Drinking water treatment sludge (DWTS) is a by-product of water treatment, and it is difficult to recycle to high value and poses potential environmental risks. Recycling DWTS into cement-based materials is an effective measure to achieve its high-volume utilization and reduce its environmental load. DWTS is rich in silica-alumina phases and has potential pozzolanic activity after drying, grinding and calcination, giving it similar properties to traditional supplementary cementitious materials. Adjusting the sludge production process and coagulant type will change its physical and chemical properties. Adding a small amount of DWTS can generate additional hydration products and refine the pore structure of the cement sample, thus improving the mechanical properties and durability of the sample. However, adding high-volume DWTS to concrete causes microstructural deterioration, but it is feasible to use high-volume DWTS to produce artificial aggregates, lightweight concrete, and sintered bricks. Meanwhile, calcined DWTS has similar compositions to clay, which makes it a potential raw material for cement clinker production. Cement-based materials can effectively solidify heavy metal ions in DWTS, and alkali-activated binders, magnesium-based cement, and carbon curing technology can further reduce the risk of heavy metal leaching. This review provides support for the high-value utilization of DWTS in cement-based materials and the reduction of its potential environmental risks.
