RESUMO
Next-generation electronics and energy technologies can now be developed as a result of the design, discovery, and development of novel, environmental friendly lead (Pb)-free ferroelectric materials with improved characteristics and performance. However, there have only been a few reports of such complex materials' design with multi-phase interfacial chemistry, which can facilitate enhanced properties and performance. In this context, herein, novel lead-free piezoelectric materials (1-x)Ba0.95 Ca0.05 Ti0.95 Zr0.05 O3 -(x)Ba0.95 Ca0.05 Ti0.95 Sn0.05 O3 , are reported, which are represented as (1-x)BCZT-(x)BCST, with demonstrated excellent properties and energy harvesting performance. The (1-x)BCZT-(x)BCST materials are synthesized by high-temperature solid-state ceramic reaction method by varying x in the full range (x = 0.00-1.00). In-depth exploration research is performed on the structural, dielectric, ferroelectric, and electro-mechanical properties of (1-x)BCZT-(x)BCST ceramics. The formation of perovskite structure for all ceramics without the presence of any impurity phases is confirmed by X-ray diffraction (XRD) analyses, which also reveals that the Ca2+ , Zr4+ , and Sn4+ are well dispersed within the BaTiO3 lattice. For all (1-x)BCZT-(x)BCST ceramics, thorough investigation of phase formation and phase-stability using XRD, Rietveld refinement, Raman spectroscopy, high-resolution transmission electron microscopy (HRTEM), and temperature-dependent dielectric measurements provide conclusive evidence for the coexistence of orthorhombic + tetragonal (Amm2 + P4mm) phases at room temperature. The steady transition of Amm2 crystal symmetry to P4mm crystal symmetry with increasing x content is also demonstrated by Rietveld refinement data and related analyses. The phase transition temperatures, rhombohedral-orthorhombic (TR-O ), orthorhombic- tetragonal (TO-T ), and tetragonal-cubic (TC ), gradually shift toward lower temperature with increasing x content. For (1-x)BCZT-(x)BCST ceramics, significantly improved dielectric and ferroelectric properties are observed, including relatively high dielectric constant εr ≈ 1900-3300 (near room temperature), εr ≈ 8800-12 900 (near Curie temperature), dielectric loss, tan δ ≈ 0.01-0.02, remanent polarization Pr ≈ 9.4-14 µC cm-2 , coercive electric field Ec ≈ 2.5-3.6 kV cm-1 . Further, high electric field-induced strain S ≈ 0.12-0.175%, piezoelectric charge coefficient d33 ≈ 296-360 pC N-1 , converse piezoelectric coefficient ( d 33 ∗ ) ave ${( {d_{33}^*} )}_{{\rm{ave}}}$ ≈ 240-340 pm V-1 , planar electromechanical coupling coefficient kp ≈ 0.34-0.45, and electrostrictive coefficient (Q33 )avg ≈ 0.026-0.038 m4 C-2 are attained. Output performance with respect to mechanical energy demonstrates that the (0.6)BCZT-(0.4)BCST composition (x = 0.4) displays better efficiency for generating electrical energy and, thus, the synthesized lead-free piezoelectric (1-x)BCZT-(x)BCST samples are suitable for energy harvesting applications. The results and analyses point to the outcome that the (1-x)BCZT-(x)BCST ceramics as a potentially strong contender within the family of Pb-free piezoelectric materials for future electronics and energy harvesting device technologies.
RESUMO
A 'powder-poling' technique was developed to study electric field induced structural transformations in ferroelectrics exhibiting a morphotropic phase boundary (MPB). The technique was employed on soft PZT exhibiting a large longitudinal piezoelectric response (d(33) â¼ 650 pC N(-1)). It was found that electric poling brings about a considerable degree of irreversible tetragonal to monoclinic transformation. The same transformation was achieved after subjecting the specimen to mechanical stress, which suggests an equivalence of stress and electric field with regard to the structural mechanism in MPB compositions. The electric field induced structural transformation was also found to be accompanied by a decrease in the spatial coherence of polarization.
