Enamel Remineralisation with a Novel Sodium Fluoride-Infused Bristle Toothbrush.

This study aims to investigate whether toothbrushes with fluoride-infused bristles have any (re)mineralisation effects on bovine enamel. Bovine incisors (N = 160) were extracted, and the buccal side of the crown was cut into dimensions of ~5 mm × 5 mm with a low-speed saw. These specimens were randomly allocated into four groups: half (80 teeth) were stored in demineralising solution (DM), and the other half were stored in deionised water (DW) for 96 h. Then, they were brushed with a force of 2.0 ± 0.1 N for five min with a manual toothbrush with either fluoride-infused (TF) or regular (TR) bristles. Microhardness (Vickers), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), and scanning electron microscopy (SEM) were used to investigate the surfaces of the bovine enamel specimens before and after brushing. Two-way ANOVA was used to analyse the hardness data, and the pairwise comparison method was used to analyse the Ca/P ratio, for each group at α = 0.05. The results show that brushing with either of these toothbrushes increased the Vickers microhardness on DM and DW enamel (p < 0.001), whereas hydroxyapatite was revealed in all groups by XRD. The DM samples showed a significant increase (p < 0.05) in the Ca/P ratios after brushing with TR and TF. Conversely, under DW conditions, these ratios decreased significantly after brushing. In terms of the F atomic%, TF increased significantly. SEM revealed mineral deposition in the DM groups after toothbrushing. To conclude, toothbrushing effectively induces the microhardness of sound and demineralised enamel, while fluoride-infused bristles might be able to retain fluoride on the enamel surface.

Design of Multi-Functional Bio-Safe Dental Resin Composites with Mineralization and Anti-Biofilm Properties.

This study aims to develop multi-functional bio-safe dental resin composites with capabilities for mineralization, high in vitro biocompatibility, and anti-biofilm properties. To address this issue, experimental resin composites consisting of UDMA/TEGDMA-based dental resins and low quantities (1.9, 3.8, and 7.7 vol%) of 45S5 bioactive glass (BAG) particles were developed. To evaluate cellular responses of resin composites, MC3T3-E1 cells were (1) exposed to the original composites extracts, (2) cultured directly on the freshly cured resin composites, or (3) cultured on preconditioned composites that have been soaked in deionized water (DI water), a cell culture medium (MEM), or a simple HEPES-containing artificial remineralization promotion (SHARP) solution for 14 days. Cell adhesion, cell viability, and cell differentiation were, respectively, assessed. In addition, the anti-biofilm properties of BAG-loaded resin composites regarding bacterial viability, biofilm thickness, and biofilm morphology, were assessed for the first time. In vitro biological results demonstrated that cell metabolic activity and ALP expression were significantly diminished when subjected to composite extracts or direct contact with the resin composites containing BAG fillers. However, after the preconditioning treatments in MEM and SHARP solutions, the biomimetic calcium phosphate minerals on 7.7 vol% BAG-loaded composites revealed unimpaired or even better cellular processes, including cell adhesion, cell proliferation, and early cell differentiation. Furthermore, resin composites with 1.9, 3.8, and 7.7 vol% BAG could not only reduce cell viability in S. mutans biofilm on the composite surface but also reduce the biofilm thickness and bacterial aggregations. This phenomenon was more evident in BAG7.7 due to the high ionic osmotic pressure and alkaline microenvironment caused by BAG dissolution. This study concludes that multi-functional bio-safe resin composites with mineralization and anti-biofilm properties can be achieved by adding low quantities of BAG into the resin system, which offers promising abilities to mineralize as well as prevent caries without sacrificing biological activity.

Corrigendum: Lithium-ion battery second life: pathways, challenges and outlook.

[This corrects the article DOI: 10.3389/fchem.2024.1358417.].

Lithium-ion battery second life: pathways, challenges and outlook.

Net zero targets have resulted in a drive to decarbonise the transport sector worldwide through electrification. This has, in turn, led to an exponentially growing battery market and, conversely, increasing attention on how we can reduce the environmental impact of batteries and promote a more efficient circular economy to achieve real net zero. As these batteries reach the end of their first life, challenges arise as to how to collect and process them, in order to maximise their economical use before finally being recycled. Despite the growing body of work around this topic, the decision-making process on which pathways batteries could take is not yet well understood, and clear policies and standards to support implementation of processes and infrastructure are still lacking. Requirements and challenges behind recycling and second life applications are complex and continue being defined in industry and academia. Both pathways rely on cell collection, selection and processing, and are confronted with the complexities of pack disassembly, as well as a diversity of cell chemistries, state-of-health, size, and form factor. There are several opportunities to address these barriers, such as standardisation of battery design and reviewing the criteria for a battery's end-of-life. These revisions could potentially improve the overall sustainability of batteries, but may require policies to drive such transformation across the industry. The influence of policies in triggering a pattern of behaviour that favours one pathway over another are examined and suggestions are made for policy amendments that could support a second life pipeline, while encouraging the development of an efficient recycling industry. This review explains the different pathways that end-of-life EV batteries could follow, either immediate recycling or service in one of a variety of second life applications, before eventual recycling. The challenges and barriers to each pathway are discussed, taking into account their relative environmental and economic feasibility and competing advantages and disadvantages of each. The review identifies key areas where processes need to be simplified and decision criteria clearly defined, so that optimal pathways can be rapidly determined for each end-of-life battery.

The long-lived deep-sea bivalve Acesta excavata is sensitive to the dual stressors of sediment and warming.

Human influence in the deep-sea is increasing as mining and drilling operations expand, and waters warm because of climate change. Here, we investigate how the long-lived deep-sea bivalve, Acesta excavata responds to sediment pollution and/or acute elevated temperatures. A. excavata were exposed to suspended sediment, acute warming, and a combination of the two treatments for 40 days. We measured O2 consumption, NH4+ release, Total Organic Carbon (TOC), and lysosomal membrane stability (LMS). We found suspended sediment and warming interacted to decrease O:N ratios, while sediment as a single stressor increased the release of TOC and warming increased NH4+ release in A. excavata. Warming also increased levels of LMS. We found A. excavata used protein catabolism to meet elevated energetic demands indicating a low tolerance to stress. A. excavata has limited capacity for physiological responses to the stressors of warming and sediment which may lead to decreased fitness of A. excavata.

Effects of elevated temperature and different crystal structures of TiO2 nanoparticles on the gut microbiota of mussel Mytilus coruscus.

Coastal habitats are exposed to increasing pressure of nanopollutants commonly combined with warming due to the seasonal temperature cycles and global climate change. To investigate the toxicological effects of TiO2 nanoparticles (TiO2 NPs) and elevated temperature on the intestinal health of the mussels (Mytilus coruscus), the mussels were exposed to 0.1 mg/L TiO2 NPs with different crystal structures for 14 days at 20 °C and 28 °C, respectively. Compared to 20 °C, the agglomeration of TiO2 NPs was more serious at 28 °C. Exposure to TiO2 NPs led to elevated mortality of M. coruscus and modified the intestinal microbial community as shown by 16S rRNA sequence analysis. Exposure to TiO2 NPs changed the relative abundance of Bacteroidetes, Proteobacteria and Firmicutes. The relative abundances of putative mutualistic symbionts Tenericutes and Fusobacteria increased in the gut of M. coruscus exposed to anatase, which have contributed to the lower mortality in this group. LEfSe showed the combined stress of warming and TiO2 NPs increased the risk of M. coruscus being infected with potential pathogenic bacteria. This study emphasizes the toxicity differences between crystal structures of TiO2 NPs, and will provides an important reference for analyzing the physiological and ecological effects of nanomaterial pollution on bivalves under the background of global climate change.

Combined effects of microfibers and polychlorinated biphenyls on the immune function of hemocytes in the mussel Mytilus coruscus.

Numerous studies have shown that microplastics can interact with other pollutants in the environment to produce synergistic effects, leading to more serious impacts. To date, there is little consensus on the combined effects of microfibers (MFs) and polychlorinated biphenyls (PCBs, Aroclor 1254), two legacy and alarming environmental pollutants. There is an urgent need to assess the impact of combined exposures on bivalve immune defences. In this study, we assessed the immune response of the mussels (Mytilus coruscus) hemocyte to MFs and PCBs alone and in combination by using flow cytometry. M. coruscus were exposed to MFs (1000 pieces/L) and PCBs (PCBs) (100 ng/L and 1000 ng/L) alone or in combination for 14 consecutive days and recovered for 7 days. The hemocyte of M. coruscus was collected on day 7, 14 and 21. MF exposure alone had no effect on the hemocyte. The total hemocyte count (THC), esterase (EA), lysosomal contents (LC), mitochondrial number (MN) and mitochondrial membrane potential (MMP) of mussels showed a decreasing trend with increasing PCB concentrations, both individually and in combination; The decreases in EA, MN and MMP were associated with the induction of reactive oxygen species (ROS). Hemocyte mortality (HM) was associated with a decrease in THC. Combined exposure to MFs and PCBs would exacerbate the effects on hemocyte immunity. These new findings improve our understanding of the toxic effects of MFs and organic chemical pollutants, and demonstrate the potential mechanism of PCBs to bivalves through changes in hemolymph immunity-related indicators.

Nano-TiO2 aggravates the adverse effect of pentachlorophenol on antioxidant and immune response in anti-predatory mussels.

Nano-TiO2 can act as a vector to organic compounds, such as pentachlorophenol (PCP) posing a potential threat to the marine ecosystems. Studies showed that nano pollutant toxicity can be modulated by abiotic factors, but little is known about the potential influence of biotic stressors (such as predators) on the physiological responses to pollutants in marine organisms. We explored the effects of n-TiO2 and PCP on the mussel Mytilus coruscus in the presence of its natural predator, the swimming crab Portunus trituberculatus. Exposure to n-TiO2, PCP, and predation risk showed interactive effects on antioxidant and immune parameters of the mussels. Elevated activities of catalase (CAT), glutathione peroxidase (GPX), acid phosphatase (ACP) and alkaline phosphatase (AKP), suppressed activity of superoxide dismutase (SOD), lower levels of glutathione (GSH) and increased malondialdehyde (MDA) levels indicated dysregulation of the antioxidant system and immune stress induced by single PCP or n-TiO2 exposure. Integrated biomarker (IBR) response values showed the effect of PCP was concentration dependent. Of the two used n-TiO2 sizes (25 and 100 nm), larger particles induced higher antioxidant and immune disturbances indicating higher toxicity possibly due to higher bioavailability. Compared to single PCP exposure, the combination of n-TiO2 and PCP enhanced the imbalance of SOD/CAT and GSH/GPX and led to elevated oxidative lesions and activation of immune-related enzymes. Overall, the combined impacts of pollutants and biotic stress exhibited a greater magnitude of adverse effects on antioxidant defense and immune parameters in mussels. The toxicological effects of PCP were exacerbated in the presence of n-TiO2, and the deleterious impact of these stressors was further amplified under predator-induced risk after prolonged (28 days) exposure. However, the underlying physiological regulatory mechanisms governing the interplay of these stressors and predatory cues on mussels remain elusive, warranting further investigation.

A Personalised 3D-Printed Dental Plaque Removal Mouthguard for Older Adults.

OBJECTIVES: The aim of the present study was to examine the plaque removal effectiveness of a personalised 3D-printed dental plaque removal mouthguard device in a clinical trial setting. METHODS: A personalised 3D-printed mouthguard was developed to clean dental plaque using micro-mist. A clinical trial was conducted to examine the plaque removal effectiveness of this device. The clinical trial recruited 55 participants (21 males and 34 females) with an average age of 68.4 years (range, 60-81 years). Dental plaque was dyed by plaque disclosing liquid (Ci). Turesky Modification of the Quigley-Hein Plaque Index (TMQHPI) was used to evaluate the level and rate of plaque formation on the tooth surface. The TMQHPI was recorded and intraoral photos were taken before and after mouthguard cleaning. The plaque removal rate was calculated based on TMQHPI and intraoral photos (pixel-based method) before and after cleaning. RESULTS: The personalised 3D-printed micro-mist injection mouthguard can be effective in dental plaque removal on tooth and gingiva, and the effectiveness lies between that of a manual toothbrush and a mouth rinse. The newly proposed pixel-based method can be a practical, high sensitive tool to evaluate the level of plaque formation. CONCLUSIONS: Under the conditions of the present study, we conclude that the personalised 3D-printed micro-mist injection mouthguard can be useful in reducing dental plaque and may be especially suitable for older adults and disabled people.

Guided Bone Regeneration in a Periodontally Compromised Individual with Autogenous Tooth Bone Graft: A Radiomics Analysis.

BACKGROUND: Autogenous tooth bone graft material (AutoBT) has been advocated as a bone substitute when conducting alveolar ridge preservation. This study is aimed at using a radiomics approach in order to evaluate and testify whether AutoBT can stimulate bone growth during socket preservation in severe periodontal cases. MATERIALS AND METHODS: For this study, 25 cases with severe periodontal diseases were selected. The patients' AutoBTs were inserted into the extraction sockets and covered with Bio-Gide® collagen membranes. 3D CBCT scans and 2D X-rays were taken of the patients before surgery and after 6 months post-surgery. For the retrospective radiomics analysis, the maxillary and mandibular images were compared in different groups. Maxillary bone height was analyzed at the buccal, middle, and palatal crest sites, while the mandibular bone height was compared at the buccal, center, and lingual crest sites. RESULTS: In the maxilla, the alveolar height was increased by -2.15 ± 2.90 mm at the buccal crest; -2.45 ± 2.36 mm at the center of the socket, and -1.62 ± 3.19 mm at the palatal crest, while the height of the buccal crest was increased by 0.19 ± 3.52 mm, and the height at the center of the socket was increased by -0.70 ± 2.71 mm in the mandible. The three-dimensional radiomics analysis demonstrated significant bone growth in the local alveolar height and high density. CONCLUSION: Based on clinical radiomics analysis, AutoBT could be used as an alternative bone material in socket preservation after tooth extraction in patients with severe periodontitis.

Intestinal response of mussels to nano-TiO2 and pentachlorophenol in the presence of predator.

With the development of industry, agriculture and intensification of human activities, a large amount of nano-TiO2 dioxide and pentachlorophenol have entered aquatic environment, causing potential impacts on the health of aquatic animals and ecosystems. We investigated the effects of predators, pentachlorophenol (PCP) and nano titanium dioxide (nano-TiO2) on the gut health (microbiota and digestive enzymes) of the thick-shelled mussel Mytilus coruscus. Nano-TiO2, as the photocatalyst for PCP, enhanced to toxic effects of PCP on the intestinal health of mussels, and they made the mussels more vulnerable to the stress from predators. Nano-TiO2 particles with smaller size exerted a larger negative effect on digestive enzymes, whereas the size effect on gut bacteria was insignificant. The presence of every two of the three factors significantly affected the population richness and diversity of gut microbiota. Our findings revealed that the presence of predators, PCP, and nano-TiO2 promoted the proliferation of pathogenic bacteria and inhibited digestive enzyme activity. This research investigated the combined stress on marine mussels caused by nanoparticles and pesticides in the presence of predators and established a theoretical framework for explaining the adaptive mechanisms in gut microbes and the link between digestive enzymes and gut microbiota.

Effect of roughness and acidic medium on wear behavior of dental resin composite.

BACKGROUND: The aim of the study was to investigate whether the citric acid and rough surface have a synergistic effect leading to severe wear behavior of resin composite. MATERIALS AND METHODS: Disk-shaped (Ø15 × 1.5 mm) specimens of resin composite (n = 12) with different initial roughness were prepared. Reciprocating ball-on-flat wear tests were performed under distilled water and citric acid (pH = 5.5) respectively. The coefficient of friction (COF), wear volume loss, and duration of the running-in period were quantified to assess the wear performance. And the values were analyzed with one-way ANOVA (α = 0.05). Regression analysis was applied to examine the influence of Ra values and mediums on the wear data. The wear morphology was analyzed by scanning electron microscopy and a 3D profilometer. RESULTS: The average COF was higher in distilled water than in citric acid but was independent of the surface roughness. For the composite, the volume loss of worn area and running-in period increased with surface roughness when tested under distilled water. However, these increasing trends were not found in citric acid. All specimens exhibited mild wear behavior with low COF and less superficial abrasion in acidic medium. CONCLUSIONS: The effect of initial roughness on wear behavior depends on the medium. In distilled water, resin composites with high initial roughness exhibit a longer running-in time, which eventually leads to a significant increase in material loss. The adverse effects of high roughness can be alleviated by the lubrication of citric acid, which can maintain a mild wear behavior regardless of initial surface roughness.

Biocompatibility and mechanical properties of an experimental E-glass fiber-reinforced composite for dentistry.

Objectives: To evaluate the biocompatibility and mechanical properties of experimental bis-phenol-A and bis-GMA free E-glass fiber-reinforced composites (FRCs) prepared with hexanediol dimethacrylate (HDDMA) based resin. Methods: Two ratios of HDDMA/TEGDMA resin were evaluated: exp-1 (70/30 wt.%) and exp-2 (50/50 wt.%) with two bis-GMA resin control groups (bis-GMA/MMA and bis-GMA/TEGDMA resins, both 70/30 wt.%). E-glass fibers were embedded into the resins to prepare FRCs specimens. Biocompatibility was assessed for cytoviability and biofilm formation with Streptococcus mutans, Streptococcus sanguinis, Enterococcus faecalis, and Candida albicans. Mechanical properties were evaluated for flexural strength and hardness (24 h, water storage 1 and 28 days), water sorption (1, 7, 14, and 28 days), contact angle, and surface roughness. The data were analyzed statistically by one-way and two-way ANOVA (p < 0.05). Results: Cytoviability of the experimental groups was significantly higher than the control groups (p < 0.05). The exp-1 cytoviability (98.2 ± 1.3%) met the ISO 10993-5 standard requirement for noncytotoxic materials. The adherence of bacteria to the experimental FRCs was visibly less than the controls, while Candida albicans adhered visibly more to the experimental groups than the controls (p < 0.05). Flexural strength showed slightly higher values for controls than for the experimental groups. The exp-1 hardness value was significantly higher in the control groups for all storage conditions (p < 0.05). The water sorption of the experimental groups was significantly higher than the controls. The surface roughness indicated no significant difference (p = 0.87). The exp-1 showed a higher contact angle with the control groups. Conclusion: The experimental HDDMA/TEGDMA-based FRCs might be potential alternatives for bis-GMA-based FRCs. Clinical significance: The HDDMA/TEGDMA E-glass FRCs might provide biocompatible restorations.

Experimental determination of the contact pressures produced by a nasal continuous positive airway pressure mask: A case study.

BACKGROUND: A continuous positive airway pressure (CPAP) mask is a respiratory ventilation method used for treating breathing disorders including respiratory failure and obstructive sleep apnoea (OSA). The forces applied by a CPAP mask may affect facial development and lead to pressure ulcers. In an experimental setting, the magnitude and the distribution of the contact pressures developed by a CPAP mask on the face were investigated for providing information aiming at optimizing the design of the device. MATERIALS AND METHODS: A nasal CPAP mask with forehead support was placed via its headgear straps on a rigid phantom head and then a controlled load was incrementally applied via a mechanical testing system (5848 Micro Tester, Instron), up to 4 maximum levels of exerted force, namely 5 N, 10 N, 15 N, and 20 N. Real-time pressure mapping was realized by means of sensor matrixes (I-Scan System, Tekscan) applied on the facial surface in four regions (forehead, nasal bridge, zygoma, and maxilla). The data were then transferred on a virtual model created by 3D scans of both the CPAP mask and the phantom head used in the experiments. RESULTS: At increasing applied force, increases in average contact pressure were present at the zygomatic region (1-8 kPa), nasal bridge (12-14 kPa), and forehead (13-29 kPa), while the maxillary region showed relatively stable values (9 kPa). Despite the overall increase in average contact pressure with increasing applied force, no direct proportionality was present. Contact areas did not show clear increments, despite force may redistribute on a larger area, as sensors did not cover the entire mask perimeter. Peak contact pressure values were somehow affected by pressure concentrations that led to saturation in some areas of the sensors (up to 2% of the sensels). CONCLUSIONS: The CPAP mask exerts pressures that may be not uniformly distributed on the face of a subject. This information underlines the clinical importance of assessing both the pressure exerted and the areas that are interested by the mask contact, so as to optimise the CPAP masks design for obtaining a good compromise between ventilation performance and reduction of possible side effects on living tissues.

Reduced Pneumonia Risk in Advanced Dementia Patients on Careful Hand Feeding Compared With Nasogastric Tube Feeding.

OBJECTIVES: To compare survival and pneumonia risk among hospitalized patients with advanced dementia on nasogastric tube feeding (NGF) vs careful hand feeding (CHF) and to examine outcomes by feeding problem type. DESIGN: Retrospective cohort study. SETTING AND PARTICIPANTS: Advanced dementia patients aged ≥60 years with indication for tube feeding admitted to 2 geriatric convalescent hospitals between January 1, 2015, and June 30, 2019. METHODS: Comparison on the effect of NGF and CHF on survival and pneumonia risk using Kaplan Meier survival analysis and Cox proportional hazards models. RESULTS: Of the 764 patients (mean age 89 years, 61% female, 74% residential care home residents), 464 (61%) were initiated on NGF and 300 (39%) on CHF. The primary feeding problem types were dysphagia (50%), behavioral feeding problem (33%), or both (17%). There was no difference in 1-year survival rate between NGF and CHF groups (36% vs 37%, P = .71) and survival did not differ by feeding problem type. Nasogastric tube feeding was not a significant predictor for survival (adjusted hazard ratio 1.15, 95% CI 0.94-1.39). Among 577 (76%) patients who survived to discharge, pneumonia rates were lower in the CHF group (48% vs 60%, P = .004). After adjusting for cofounders, NGF was a significant risk factor for pneumonia (adjusted hazard ratio 1.41, 95% CI 1.08-1.85). In subgroup analyses, NGF was associated with increased pneumonia risk for patients with both dysphagia and behavioral feeding problem (P = .01) but not in patients with behavioral feeding problem alone (P = .24) or dysphagia alone (P = .30). CONCLUSIONS AND IMPLICATIONS: For advanced dementia patients with feeding problems, there is no difference in survival between NGF and CHF. However, NGF is associated with a higher pneumonia risk, particularly for patients with both dysphagia and behavioral feeding problem. Further research on how the feeding problem type impacts pneumonia risk for patients on NGF is needed.

Midpalatal suture maturation staging using cone beam computed tomography in patients aged between 9 to 21 years.

Midpalatal suture was analysed with cone beam computed tomography to identify its maturation with respect to age and maxillary-complex growth in 72 patients 9- to 21-year-old. Maxillary-complex was divided in premaxillary, maxillary, and palatine segment. Interdigitation and ossification of midpalatal suture, its density relative to hard tissues and soft tissues, and midpalatal suture density ratio were measured for each segment. Correlation of each parameter with age and maxillary-complex length was analysed, and classification trees were developed for staging parameters. Midpalatal suture maturation stages (MPSMS, from A to E) were applied to assess relationship with age and maxillary-complex length. Regarding age, ossification increased in maxillary segment of males (rS = 0.39, p = 0.032), while suture density relative to soft tissues increased in maxillary (rS = 0.37, p = 0.042) and palatine segments (rS = 0.41, p = 0.027) of males and in palatine segment of females (rS = 0.32, p = 0.041). In males, suture density relative to soft tissues discriminated two age-stages (p = 0.024), and the same parameter (p = 0.023) paired with ossification (p = 0.027) discriminated two length-stages. MPSMS identified length-differences between stage A and B in females (p = 0.001). Midpalatal-suture ossification and its density relative to soft tissues showed some relationship with age and maxillary-complex length, especially in males. However, challenging staging and limitations in the imaging method may limit clinical applications.

A biomimetic approach to evaluate mineralization of bioactive glass-loaded resin composites.

PURPOSE: This study explores novel solutions other than standard SBF for biomimetic evaluations of mineralization particularly for resin composites containing bioactive glass (BAG). METHODS: Experimental UDMA/TEGDMA resin composites with 0.0, 1.9, 3.8 or 7.7 vol% of 45S5 BAG fillers were prepared. Besides simulated body fluid (SBF) as control, the specimens were immersed in three other solutions either with bicarbonate which are Hank's balanced salt solution (HBSS) and cell culture medium (MEM), or without bicarbonate which is a novel Simple HEPES-containing Artificial Remineralization Promotion (SHARP) solution, for 3, 7 and 14 days. These solutions were then analyzed by ICP-OES and pH meter, and the surfaces of the BAG composites were analyzed by SEM, XRD and FTIR. RESULTS: ICP-OES revealed Ca and P concentration continuously decrease, while Si concentration increases with time in the solutions other than SBF, which showed almost unchanged elemental concentration. Only SHARP solution is able to maintain a constant pH over the immersion time. SEM, together with XRD and FTIR, showed nano-sized octacalcium phosphate (OCP) nanospheres formation on 3.8 and 7.7 vol% BAG composites after 14 days immersion in HBSS (500-600 nm) and MEM (300-400 nm). SHARP solution enabled OCP formation after 3 days and then self-assembled into urchin-like carbonated hydroxyapatite (CHA) microspheres encompassed with nanorods of 100 nm width and 8 µm length after 14 days of immersion for 7.7 vol% BAG composites. CONCLUSION: This study suggests SHARP solution can evaluate mineralization biomimetically whereas CHA microspheres can be formed on BAG-containing resin composites.

Does the geometry of scan bodies affect the alignment accuracy of computer-aided design in implant digital workflow: An in vitro study?

OBJECTIVES: To compare 2 implant scan bodies with different geometry on the accuracy of the virtual alignment process in the digital workflow. MATERIALS AND METHODS: A master model of the edentulous maxilla with 6 implants and multiunit abutments (MUA) inserted was fabricated. Six dome-shaped and cuboidal scan bodies were mounted on the MUAs, respectively, and consecutively scanned by a laboratory scanner 10 times. The original scans were imported to a dental-specific CAD software and virtually aligned with the default CAD model in the implant library. Thus, 10 aligned models were created. Both the original scans and the aligned models were evaluated by an inspection software for deviation of the scan body surfaces, the centroids of scan body and MUA, the scan body center-axis, and the inter-MUA distances/angles. The two-sample T-test/Mann-Whitney U test were used to analyze the data with the level of significance set at 0.05. RESULTS: The cuboidal group showed significant greater deviations of the model surface (13.9 µm vs. 10.7 µm) and the MUA centroids (31.7 µm vs. 22.8 µm) but smaller deviation of the inter-MUA angle (0.047° vs. 0.070°) than those of the dome-shaped group (p < .05). No significant differences in the deviation of scan body centroids, center-axis, and the inter-MUA distances between the 2 groups were found. CONCLUSIONS: Virtual alignment of implant scan body affected the accuracy of the digital workflow for complete-arch implant-supported prostheses (up to ~30 µm/0.09°). Different geometries of the implant scan body could also influence the transfer accuracy in the CAD process.

Microplastics and food shortage impair the byssal attachment of thick-shelled mussel Mytilus coruscus.

Microplastics (MPs) have become a ubiquitous emerging pollutant in the global marine environment. The potential toxic effects of MPs and interactions of MP pollution with other stressors such as food limitation on marine organisms' health are not yet well understood. This study investigated the effects of three-week exposure to different MPs and food shortage on the physical defense mechanisms (byssus production and properties) of Mytilus coruscus. Starvation significantly reduced the number of byssus threads, and combined exposure to MPs and food shortage suppressed the adhesion ability and condition index of mussels. The length of the byssus threads was not affected by all experimental exposures. Transcript levels of genes encoding key proteins involved in byssus formation (the mussel foot proteins mfp-1, -2, -3, -4, -5 and -6, and prepolymerized collagen proteins preCOL-D, -P and -NG) were altered by interactions between the MPs and food shortage. These findings show that insufficient food supply can exacerbate the adverse effects of MPs on mussel defense which might have implications for survival and fitness of mussels under food limited conditions (e.g. in winter) in polluted coastal habitats.