Molecular analysis of two cytochrome P450 monooxygenase genes required for paxilline biosynthesis in Penicillium paxilli, and effects of paxilline intermediates on mammalian maxi-K ion channels.

The gene cluster required for paxilline biosynthesis in Penicillium paxilli contains two cytochrome P450 monooxygenase genes, paxP and paxQ. The primary sequences of both proteins are very similar to those of proposed cytochrome P450 monooxygenases from other filamentous fungi, and contain several conserved motifs, including that for a haem-binding site. Alignment of these sequences with mammalian and bacterial P450 enzymes of known 3-D structure predicts that there is also considerable conservation at the level of secondary structure. Deletion of paxP and paxQ results in mutant strains that accumulate paspaline and 13-desoxypaxilline, respectively. These results confirm that paxP and paxQ are essential for paxilline biosynthesis and that paspaline and 13-desoxypaxilline are the most likely substrates for the corresponding enzymes. Chemical complementation of paxilline biosynthesis in paxG (geranygeranyl diphosphate synthase) and paxP, but not paxQ, mutants by the external addition of 13-desoxypaxilline confirms that PaxG and PaxP precede PaxQ, and are functionally part of the same biosynthetic pathway. A pathway for the biosynthesis of paxilline is proposed on the basis of these and earlier results. Electrophysiological experiments demonstrated that 13-desoxypaxilline is a weak inhibitor of mammalian maxi-K channels (Ki=730 nM) compared to paxilline (Ki=30 nM), indicating that the C-13 OH group of paxilline is crucial for the biological activity of this tremorgenic mycotoxin. Paspaline is essentially inactive as a channel blocker, causing only slight inhibition at concentrations up to 1 microM.

Substrate deactivation of phenylalanine-sensitive 3-deoxy-D-arabino-heptulosonate 7-phosphate synthase by erythrose 4-phosphate.

3-Deoxy-D-arabino-heptulosonate 7-phosphate synthase (DAH7PS, EC 4.1.2.15) catalyzes the condensation of phosphoenolpyruvate (PEP) with erythrose 4-phosphate (E4P) to give DAH7P via an ordered sequential mechanism. In the absence of PEP (the first substrate to bind), E4P binds covalently to the phenylalanine-sensitive DAH7PS of Escherichia coli, DAH7PS(Phe), deactivating the enzyme. Activity is restored on addition of excess PEP but not if deactivation was carried out in the presence of sodium cyanoborohydride. Electrospray mass spectrometry indicates that a single E4P is bound to the protein. These data are consistent with a slow, reversible Schiff base reaction of the aldehydic functionality of E4P with a buried lysine. Molecular modeling indicates that Lys186, a residue at the base of the substrate-binding cavity involved in hydrogen bonding with PEP, is well placed to react with E4P forming an imine linkage that is substantially protected from solvent water.

Superimposed saddle and ruffled distortions of the porphyrin in iodo(pyridine-N)(5,10,15,20-tetraphenylporphyrinato-kappa(4)N)rhodium(III) toluene solvate.

In the title compound, [RhI(C(44)H(28)N(4))(C(5)H(5)N)].C(7)H(8), the porphyrin ring experiences significant distortion from planarity (a saddle conformation with a superimposed ruffling), as a result of steric interactions with the 2,6-H atoms of the axial pyridine ligand. This also leads to a slight lengthening of the Rh-pyridine bond [Rh-N 2.102 (7) A] relative to those seen in other pyridine adducts of six-coordinate Rh(III). The metric parameters of the porphyrin core are comparable with those of related metalloporphyrin derivatives. No significant intermolecular interactions are observed between the metalloporphyrin and disordered solvate species.

Removing a hydrogen bond in the dimer interface of Escherichia coli manganese superoxide dismutase alters structure and reactivity.

Among manganese superoxide dismutases, residues His30 and Tyr174 are highly conserved, forming part of the substrate access funnel in the active site. These two residues are structurally linked by a strong hydrogen bond between His30 NE2 from one subunit and Tyr174 OH from the other subunit of the dimer, forming an important element that bridges the dimer interface. Mutation of either His30 or Tyr174 in Escherichia coli MnSOD reduces the superoxide dismutase activity to 30--40% of that of the wt enzyme, which is surprising, since Y174 is quite remote from the active site metal center. The 2.2 A resolution X-ray structure of H30A-MnSOD shows that removing the Tyr174-->His30 hydrogen bond from the acceptor side results in a significant displacement of the main-chain segment containing the Y174 residue, with local rearrangement of the protein. The 1.35 A resolution structure of Y174F-MnSOD shows that disruption of the same hydrogen bond from the donor side has much greater consequences, with reorientation of F174 having a domino effect on the neighboring residues, resulting in a major rearrangement of the dimer interface and flipping of the His30 ring. Spectroscopic studies on H30A, H30N, and Y174F mutants show that (like the previously characterized Y34F mutant of E. coli MnSOD) all lack the high pH transition of the wt enzyme. This observation supports assignment of the pH sensitivity of MnSOD to coordination of hydroxide ion at high pH rather than to ionization of the phenolic group of Y34. Thus, mutations near the active site, as in the Y34F mutant, as well as at remote positions, as in Y174F, similarly affect the metal reactivity and alter the effective pK(a) for hydroxide ion binding. These results imply that hydrogen bonding of the H30 imidazole N--H group plays a key role in substrate binding and catalysis.

Outer sphere mutations perturb metal reactivity in manganese superoxide dismutase.

Tyrosine 34 and glutamine 146 are highly conserved outer sphere residues in the mononuclear manganese active site of Escherichia coli manganese superoxide dismutase. Biochemical and spectroscopic characterization of site-directed mutants has allowed functional characterization of these residues in the wild-type (wt) enzyme. X-ray crystallographic analysis of three mutants (Y34F, Q146L, and Q146H) reveal subtle changes in the protein structures. The Y34A mutant, as well as the previously reported Y34F mutant, retained essentially the full superoxide dismutase activity of the wild-type enzyme, and the X-ray crystal structure of Y34F manganese superoxide dismutase shows that mutation of this strictly conserved residue has only minor effects on the positions of active site residues and the organized water in the substrate access funnel. Mutation of the outer sphere solvent pocket residue Q146 has more dramatic effects. The Q146E mutant is isolated as an apoprotein lacking dismutase activity. Q146L and Q146H mutants retain only 5-10% of the dismutase activity of the wild-type enzyme. The absorption and circular dichroism spectra of the Q146H mutant resemble corresponding data for the superoxide dismutase from a hyperthermophilic archaeon, Pyrobaculum aerophilum, which is active in both Mn and Fe forms. Interestingly, the iron-substituted Q146H protein also exhibits low dismutase activity, which increases at lower pH. Mutation of glutamine 146 disrupts the hydrogen-bonding network in the active site and has a greater effect on protein structure than does the Y34F mutant, with rearrangement of the tyrosine 34 and tryptophan 128 side chains.

RNA folding argues against a hot-start origin of life.

Opinion is strongly divided on whether life arose on earth under hot or cold conditions, the hot-start and cold-start scenarios, respectively. The origin of life close to deep thermal vents appears as the majority opinion among biologists, but there is considerable biochemical evidence that high temperatures are incompatible with an RNA world. To be functional, RNA has to fold into a three-dimensional structure. We report both theoretical and experimental results on RNA folding and show that (as expected) hot conditions strongly reduce RNA folding. The theoretical results come from energy-minimization calculations of the average extent of folding of RNA, mainly from 0-90 degrees C, for both random sequences and tRNA sequences. The experimental results are from circular-dichroism measurements of tRNA over a similar range of temperatures. The quantitative agreement between calculations and experiment is remarkable, even to the shape of the curves indicating the cooperative nature of RNA folding and unfolding. These results provide additional evidence for a lower temperature stage being necessary in the origin of life.

Crystal structure and iron-binding properties of the R210K mutant of the N-lobe of human lactoferrin: implications for iron release from transferrins.

Lactoferrin (Lf) and serum transferrin (Tf) combine high-affinity iron binding with an ability to release this iron at reduced pH. Lf, however, retains iron to significantly lower pH than Tf, giving the two proteins distinct functional roles. In this paper, we compared the iron-release profiles for human Lf, Tf, and their N-lobe half-molecules Lf(N) and Tf(N) and showed that half of the difference in iron retention at low pH ( approximately 1.3 pH units) results from interlobe interactions in Lf. To probe factors intrinsic to the N-lobes, we further examined the specific role of two basic residues that are proposed to form a pH-sensitive dilysine trigger for iron release in the N-lobe of Tf [Dewan, J. C., Mikami, B., Hirose, M., and Sacchettini, J. C. (1993) Biochemistry 32, 11963-11968] by mutating Arg 210 to Lys in the N-lobe half-molecule Lf(N). The R210K mutant was expressed, purified, and crystallized, and its crystal structure was determined and refined at 2.0-A resolution to a final R factor (R(free)) of 19.8% (25.0%). The structure showed that Lys 210 and Lys 301 in R210K do not form a dilysine interaction like that between Lys 206 and Lys 296 in human Tf. The R210K mutant retained iron to lower pH than Tf(N), consistent with the absence of the dilysine interaction but released iron at approximately 0.7 pH units higher than Lf(N). We conclude that (i) the ability of Lf to retain iron to significantly lower pH than Tf is due equally to interlobe interactions and to the absence in Lfs of an interaction analogous to the dilysine pair in Tfs, even when two lysines are present at the corresponding sequence positions, and (ii) an appropriately positioned basic residue (Arg 210 in human Lf) modulates iron release by inhibiting protonation of the N-lobe iron ligands, specifically His 253.

Structural changes accompanying pH-induced dissociation of the beta-lactoglobulin dimer.

We have used NMR spectroscopy to determine the three-dimensional (3D) structure, and to characterize the backbone dynamics, of a recombinant version of bovine beta-lactoglobulin (variant A) at pH 2. 6, where the protein is a monomer. The structure of this low-pH form of beta-lactoglobulin is very similar to that of a subunit within the dimer at pH 6.2. The root-mean-square deviation from the pH 6.2 (crystal) structure, calculated for backbone atoms of residues 6-160, is approximately 1.3 A. Differences arise from the orientation, with respect to the calyx, of the A-B and C-D loops, and of the flanking three-turn alpha-helix. The hydrophobic cavity within the calyx is retained at low pH. The E-F loop (residues 85-90), which moves to occlude the opening of the cavity over the pH range 7.2-6.2, is in the "closed" position at pH 2.6, and the side chain of Glu89 is buried. We also carried out measurements of (15)N T(1)s and T(2)s and (1)H-(15)N heteronuclear NOEs at pH 2.6 and 37 degrees C. Although the residues of the E-F loop (residues 86-89) have the highest crystallographic B-factors, the conformation of this loop is reasonably well defined by the NMR data, and its backbone is not especially mobile on the pico- to nanosecond time scale. Several residues (Ser21, Lys60, Ala67, Leu87, and Glu112) exhibit large ratios of T(1) to T(2), consistent with conformational exchange on a micro- to millisecond time scale. The positions of these residues in the 3D structure of beta-lactoglobulin are consistent with a role in modulating access to the hydrophobic cavity.

Functional implications of structural differences between variants A and B of bovine beta-lactoglobulin.

The structure of the trigonal crystal form of bovine beta-lactoglobulin variant B at pH 7.1 has been determined by X-ray diffraction methods at a resolution of 2.22 A and refined to values for R and Rfree of 0.239 and 0.286, respectively. By comparison with the structure of the trigonal crystal form of bovine beta-lactoglobulin variant A at pH 7.1, which was determined previously [Qin BY et al., 1998, Biochemistry 37:14014-14023], the structural consequences of the sequence differences D64G and V118A of variants A and B, respectively, have been investigated. Only minor differences in the core calyx structure occur. In the vicinity of the mutation site D64G on loop CD (residues 61-67), there are small changes in main-chain conformation, whereas the substitution V118A on beta-strand H is unaccompanied by changes in the surrounding structure, thereby creating a void volume and weakened hydrophobic interactions with a consequent loss of thermal stability relative to variant A. A conformational difference is found for the loop EF, implicated in the pH-dependent conformational change known as the Tanford transition, but it is not clear whether this reflects differences intrinsic to the variants in solution or differences in crystallization.

Structure of recombinant human lactoferrin expressed in Aspergillus awamori.

Human lactoferrin (hLf) has considerable potential as a therapeutic agent. Overexpression of hLf in the fungus Aspergillus awamori has resulted in the availability of very large quantities of this protein. Here, the three-dimensional structure of the recombinant hLf has been determined by X-ray crystallography at a resolution of 2.2 A. The final model, comprising 5339 protein atoms (residues 1-691, 294 solvent molecules, two Fe3+and two CO32- ions), gives an R factor of 0.181 (free R = 0.274) after refinement against 32231 reflections in the resolution range 10-2.2 A. Superposition of the recombinant hLf structure onto the native milk hLf structure shows a very high level of correspondence; the main-chain atoms for the entire polypeptide can be superimposed with an r.m.s. deviation of only 0.3 A and there are no significant differences in side-chain conformations or in the iron-binding sites. Dynamic properties, as measured by B-value distributions or iron-release kinetics, also agree closely. This shows that the structure of the protein is not affected by the mode of expression, the use of strain-improvement procedures or the changes in glycosylation due to the fungal system.

12-Bromododecanoic acid binds inside the calyx of bovine beta-lactoglobulin.

The X-ray structure of bovine beta-lactoglobulin with the ligand 12-bromododecanoic acid as a model for fatty acids has been determined at a resolution of 2.23 A in the trigonal lattice Z form. The ligand binds inside the calyx, resolving a long-standing controversy as to where fatty-acid like ligands bind. The carboxylate head group lies at the surface of the molecule, and the lid to the calyx is open at the pH of crystallization (pH 7.3), consistent with the conformation observed in ligand-free bovine beta-lactoglobulin in lattice Z at pH 7.1 and pH 8.2.

Structural basis of the Tanford transition of bovine beta-lactoglobulin.

The structures of the trigonal crystal form of bovine beta-lactoglobulin variant A at pH 6.2, 7.1, and 8.2 have been determined by X-ray diffraction methods at a resolution of 2.56, 2. 24, and 2.49 A, respectively. The corresponding values for R (Rfree) are 0.192 (0.240), 0.234 (0.279), and 0.232 (0.277). The C and N termini as well as two disulfide bonds are clearly defined in these models. The glutamate side chain of residue 89 is buried at pH 6.2 and becomes exposed at pH 7.1 and 8.2. This conformational change, involving the loop 85-90, provides a structural basis for a variety of pH-dependent chemical, physical, and spectroscopic phenomena, collectively known as the Tanford transition.

Structure of human apolactoferrin at 2.0 A resolution. Refinement and analysis of ligand-induced conformational change.

The three-dimensional structure of a form of human apolactoferrin, in which one lobe (the N-lobe) has an open conformation and the other lobe (the C-lobe) is closed, has been refined at 2.0 A resolution. The refinement, by restrained least-squares methods, used synchrotron radiation X-ray diffraction data combined with a lower resolution diffractometer data set. The final refined model (5346 protein atoms from residues 1-691, two Cl- ions and 363 water molecules) gives a crystallographic R factor of 0.201 (Rfree = 0. 286) for all 51305 reflections in the resolution range 10.0-2.0 A. The conformational change in the N-lobe, which opens up the binding cleft, involves a 54 degrees rotation of the N2 domain relative to the N1 domain. This also results in a small reorientation of the two lobes relative to one another with a further approximately 730 A2 of surface area being buried as the N2 domain contacts the C-lobe and the inter-lobe helix. These new contacts also involve the C-terminal helix and provide a mechanism through which the conformational and iron-binding status of the N-lobe can be signalled to the C-lobe. Surface-area calculations indicate a fine balance between open and closed forms of lactoferrin, which both have essentially the same solvent-accessible surface. Chloride ions are bound in the anion-binding sites of both lobes, emphasizing the functional significance of these sites. The closed configuration of the C-lobe, attributed in part to weak stabilization by crystal packing interactions, has important implications for lactoferrin dynamics. It shows that a stable closed structure, essentially identical to that of the iron-bound form, can be formed in the absence of iron binding.

Crystallization and preliminary X-ray diffraction studies of a cobalt-substituted derivative of the iron-dependent alcohol dehydrogenase from Zymomonas mobilis.

The iron-dependent alcohol dehydrogenase from Zymomonas mobilis has been crystallized in a form suitable for X-ray diffraction studies. The crystals grew in hanging drops by vapor diffusion, equilibrating with a solution comprising 25-27% methoxypolyethylene glycol 5000 and 1 mM Co(2+) in a 0.2 M succinic acid/potassium hydroxide buffer at pH 5.5-5.7 at 281 K. Crystals are tetragonal, P4(1)22 (or P4(3)22), with unit-cell dimensions a = b = 125.7, c = 248.1 A. Four molecules comprise the asymmetric unit, and a self-rotation function indicates twofold local symmetry perpendicular to the unique axis and 15 degrees from a crystallographic twofold axis. Diffraction data to 3.0 A have been collected.

Structure, function and flexibility of human lactoferrin.

X-ray structure analyses of four different forms of human lactoferrin (diferric, dicupric, an oxalate-substituted dicupric, and apo-lactoferrin), and of bovine diferric lactoferrin, have revealed various ways in which the protein structure adapts to different structural and functional states. Comparison of diferric and dicupric lactoferrins has shown that different metals can, through slight variations in the metal position, have different stereochemistries and anion coordination without any significant change in the protein structure. Substitution of oxalate for carbonate, as seen in the structure of a hybrid dicupric complex with oxalate in one site and carbonate in the other, shows that larger anions can be accommodated by small side-chain movements in the binding site. The multidomain nature of lactoferrin also allows rigid body movements. Comparison of human and bovine lactoferrins, and of these with rabbit serum transferrin, shows that the relative orientations of the two lobes in each molecule can vary; these variations may contribute to differences in their binding properties. The structure of apo-lactoferrin demonstrates the importance of large-scale domain movements for metal binding and release and suggests that in solution an equilibrium exists between open and closed forms, with the open form being the active binding species. These structural forms are shown to be similar to those seen for bacterial periplasmic binding proteins, and lead to a common model for the various steps in the binding process.