Fluxes in PHA-storing microbial communities during enrichment and biopolymer accumulation processes.

The use of mixed microbial cultures for the production of polyhydroxyalkanoates (PHAs) is emerging as a viable technology. In this study, 16S rRNA gene amplicon pyrosequencing was used to analyse fluctuations in populations over a 63-day period within a PHA-storing mixed microbial community enriched on fermented whey permeate. This community was dominated by the genera Flavisolibacter and Zoogloea as well as an unidentified organism belonging to the phylum Bacteroidetes. The population was observed to cycle through an increase in Zoogloea followed by a return to a community composition similar to the initial one (highly enriched in Flavisolibacter). It was found that the PHA accumulation capacity of the community was robust to population flux during enrichment and even PHA accumulation, with final polymer composition dependent on the overall proportion of acetic to propionic acids in the feed. This community adaptation suggests that mixed culture PHA production is a robust process.

Fractionation of microbial populations in a PHA accumulating mixed culture and associated PHA content and composition.

The uniformity of PHA composition and content across groups of organisms in mixed cultures was considered. An activated sludge microbial community, with an average PHA content of 20wt%, was fractioned by Percoll assisted buoyant density separation. The microbial community in the two principal fractions was characterised using amplicon pyrosequencing. While organisms were common to both fractions, the relative abundances of species were found to be different between the two fractions. The average PHA content in one of the fractions was found to be higher (24wt%) than the other (16wt%); separation was considered to be in part driven by the density difference associated with PHA content, but also by other factors such as cell dimension and cellular morphology. But while differences in PHA content were observed, the PHA composition in both fractions was found to be approximately the same (43-44mol% HV), which shows that distinct groups of microbial populations within mixed cultures may generate PHA with similar average copolymer composition.

Biodegradable and biocompatible biomaterial, polyhydroxybutyrate, produced by an indigenous Vibrio sp. BM-1 isolated from marine environment.

Polyhydroxybutyrate (PHB) is one of the polyhydroxyalkanoates (PHAs) which has biodegradable and biocompatible properties. They are adopted in the biomedical field, in, for example, medical implants and drug delivery carriers. This study seeks to promote the production of PHB by Vibrio sp. BM-1, isolated from a marine environment by improving constituents of medium and implementing an appropriate fermentation strategy. This study successfully developed a glycerol-yeast extract-tryptone (GYT) medium that can facilitate the growth of Vibrio sp. BM-1 and lead to the production of 1.4 g/L PHB at 20 h cultivation. This study also shows that 1.57 g/L PHB concentration and 16% PHB content were achieved, respectively, when Vibrio sp. BM-1 was cultivated with MS-GYT medium (mineral salts-supplemented GYT medium) for 12 h. Both cell dry weight (CDW) and residual CDW remained constant at around 8.2 g/L and 8.0 g/L after the 12 h of cultivation, until the end of the experiment. However, both 16% of PHB content and 1.57 g/L of PHB production decreased rapidly to 3% and 0.25 g/L, respectively from 12 h of cultivation to 40 h of cultivation. The results suggest that the secretion of PHB depolymerase that might be caused by the addition of mineral salts reduced PHB after 12 h of cultivation. However, work will be done to explain the effect of adding mineral salts on the production of PHB by Vibrio sp. BM-1 in the near future.

Screening and evaluation of polyhydroxybutyrate-producing strains from indigenous isolate Cupriavidus taiwanensis strains.

Polyhydroxyalkanoate (PHA) is a biodegradable material with many potential biomedical applications, including medical implants and drug delivery. This study developed a system for screening production strains in order to optimize PHA production in Cupriavidus taiwanensis 184, 185, 186, 187, 204, 208, 209 and Pseudomona oleovorans ATCC 29347. In this study, Sudan black B staining, Infrared (IR) and Gas Chromatography (GC) analysis indicated that the best strain for PHA synthesis is C. taiwanensis 184, which obtains polyhydroxybutyrate (PHB). Cultivation of C. taiwanensis 184 under a pH of 7.0, at 30 °C, and at an agitation rate of 200 rpm, obtained a PHB content of 10% and PHB production of 0.14 g/L. The carbon and nitrogen types selected for analysis of PHB production by C. taiwanensis 184 were gluconic acid and NH(4)Cl, respectively. Optimal carbon/nitrogen ratio for PHB production was also determined. This study demonstrated a PHB content of 58.81% and a PHB production of 2.44 g/L when the carbon/nitrogen ratio of 8/1 was selected for C. taiwanensis 184. A two-stage fermentation strategy significantly enhanced PHB content and PHB production. Under a two-stage fermentation strategy with nutrient-limited conditions, C. taiwanensis 184 obtained a PHB content of 72% and a PHB concentration of 7 g/L. Finally, experimental results confirmed that optimizing the growth medium and fermentation conditions for cultivating the indigenous C. taiwanensis 184 strain substantially elevated PHB content from 10% to 72% and PHB production from 0.14 g/L to 7 g/L, respectively.