RESUMO
This study aims to critically assess different micromechanical analysis models applied to carbon-fiber-reinforced plastic (CFRP) composites, employing micromechanics-based homogenization to accurately predict their effective properties. The paper begins with the simplest Voigt and Reuss models and progresses to more sophisticated micromechanics-based models, including the Mori-Tanaka and Method of Cells (MOC) models. It provides a critical review of the areas in which these micromechanics-based models are effective and analyses of their limitations. The numerical analysis results were confirmed through finite element simulations of the periodic representative volume element (RVE). Furthermore, the effective properties predicted by these micromechanics-based models were validated via experiments conducted on IM7/5320-1 composite material with a fiber volume fraction of 0.62.
RESUMO
The purpose of this study is to prepare a resistive lossy material using conducting polymers for electromagnetic wave absorbers. This paper presents a conductive paste largely composed of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) with a polyurethane binder. The various secondary compounds are added in small amounts to an aqueous blended solution in order to enhance the electrical and mechanical properties of the conductive thin film. The synthesized conductive paste is characterized through electrical, chemical, and morphological analyses. The electrical conductivity of the thin film is measured using a four-point probe and surface profiler. The chemical and morphological changes are studied in various experiments using a Raman microscope, X-ray photoelectron spectroscopy, a scanning electron microscope, and an atomic force microscope. In order to verify the applicability of the synthesized conductive paste, which is composed of 70 wt% PEDOT:PSS, 30 wt% polyurethane, and secondary additives (DMAE 0.4 wt%, A-187 0.5 wt%, DMSO 7 wt%, Dynol 604 0.1 wt%, PUR 40 2.5 wt%), the Salisbury screen absorber is fabricated and evaluated in the X-band. According to the results, the absorber resonates at 9.7 GHz, the reflection loss is -38.6 dB, and the 90% absorption bandwidth is 3.4 GHz (8.2 to 11.6 GHz). Through this experiment, the applicability of the PEDOT:PSS-based conductive paste is sufficiently verified and it is found that excellent radar-absorbing performance can be realized.
RESUMO
This study describes the numerical simulation results of aluminum/carbon-fiber-reinforced plastic (CFRP) hybrid joint parts using the explicit finite-element solver LS-DYNA, with a focus on capturing the failure behavior of composite laminates as well as the adhesive capacity of the aluminum-composite interface. In this study, two types of adhesive modeling techniques were investigated: a tiebreak contact condition and a cohesive zone model. Adhesive modeling techniques have been adopted as a widely commercialized model of structural adhesives to simulate adhesive failure based on fracture mechanics. CFRP was studied with numerical simulations utilizing LS-DYNA MAT54 to analyze the crash capability of aluminum/CFRP. To evaluate the simulation model, the results were compared with the force-displacement curve from numerical analysis and experimental results. A parametric study was conducted to evaluate the effect of different fracture toughness values used by designers to predict crash capability and adhesive failure of aluminum/CFRP parts.
RESUMO
Graphene oxide (GO) has recently become an attractive building block for fabricating graphene-based functional materials. GO films and fibers have been prepared mainly by vacuum filtration and wet spinning. These materials exhibit relatively high Young's moduli but low toughness and a high tendency to tear or break. Here, we report an alternative method, using bar coating and drying of water/GO dispersions, for preparing large-area GO thin films (e.g., 800-1200 cm(2) or larger) with an outstanding mechanical behavior and excellent tear resistance. These dried films were subsequently scrolled to prepare GO fibers with extremely large elongation to fracture (up to 76%), high toughness (up to 17 J/m(3)), and attractive macroscopic properties, such as uniform circular cross section, smooth surface, and great knotability. This method is simple, and after thermal reduction of the GO material, it can render highly electrically conducting graphene-based fibers with values up to 416 S/cm at room temperature. In this context, GO fibers annealed at 2000 °C were also successfully used as electron field emitters operating at low turn on voltages of ca. 0.48 V/µm and high current densities (5.3 A/cm(2)). Robust GO fibers and large-area films with fascinating architectures and outstanding mechanical and electrical properties were prepared with bar coating followed by dry film scrolling.
