Efficacy of root-end filling techniques using premixed putty type bioceramic cements: an ex vivo study.

OBJECTIVES: Currently, premixed putty-type bioceramic cements (PPBCs) have become popular materials for root-end fillings. This study investigated three root-end filling techniques using PPBCs and calcium silicate-based sealers including EDTA pretreatment. MATERIALS AND METHODS: Ninety root segments were prepared and standardized with an artificial fin and lateral canal, and assigned to three groups (n = 30). Root-end fillings were placed using BC-RRM Putty alone (Group PA), injection of BC sealer followed by BC-RRM Putty (Lid Technique: Group LT) or BC-RRM Putty with BC sealer coating (Deep putty packing technique: Group DP). Half of each group was pretreated with 17% EDTA. The radiographic images of the specimens were assessed by five graders and push-out bond strength tests were conducted. The data were analyzed with a general linear model including two-way ANOVA and chi-square test at a significance level of 5%. RESULTS: DP approach demonstrated significantly higher bond strength than LT (P < 0.05). However, there was no statistically significant difference in bond strength between PA and either DP or LT. EDTA pretreatment had no significant effect on push-out bond strength. Radiographically, for the main canal, PA and DP scored significantly higher than LT. In the fin, PA scored significantly higher than others (P < 0.05). CONCLUSION: Our study highlights variations in root-end filling techniques. Injecting a bulk of bioceramic sealer before the placement of PPBCs may reduce bond strength and radiopacity. The application of PPBCs alone or in the deep putty technique demonstrates potential for favorable outcomes. EDTA pretreatment did not enhance bond-strength. CLINICAL RELEVANCE: Careful selection and application of bioceramic materials and techniques in root-end fillings may influence the outcome of endodontic root-end surgery. When PPBCs and calcium silicate-based sealers are used together for root-end fillings, sealer followed by deep putty application may offer improved bond strength and radiographic fill compared to the lid technique.

Simultaneous Detection of Carbon Quantum Dots as Tracers for Interwell Connectivity Evaluation in a Pattern with Two Injection Wells.

This study aimed to develop and implement a nanotechnology-based alternative to traditional tracers used in the oil and gas industry for assessing interwell connectivity. A simple and rapid hydrothermal protocol for synthesizing carbon quantum dots (CQDs) using agroindustry waste was implemented. Three commercial CQDs were employed (CQDblue, CQDgreen, and CQDred); the fourth was synthesized from orange peel (CQDop). The CQDs from waste and other commercials with spherical morphology, nanometric sizes less than 11 nm in diameter, and surface roughness less than 3.1 nm were used. These tracers demonstrated high colloidal stability with a negative zeta potential, containing carbonyl-type chemical groups and unsaturations in aromatic structures that influenced their optical behavior. All materials presented high colloidal stability with negative values of charge z potential between -17.8 and -49.1. Additionally, individual quantification of these tracers is feasible even in scenarios where multiple CQDs are present in the effluent with a maximum percentage of interference of 15.5% for CQDop in the presence of the other three nanotracers. The CQDs were injected into the field once the technology was insured under laboratory conditions. Monitoring the effluents allowed the determination of connectivity for five first-line producer wells. This study enables the application of CQDs in the industry, particularly in fields where the arrangement of injector and producer wells is intricate, requiring the use of multiple tracers for a comprehensive description of the system.

Microcomputed tomographic evaluation of 6 NiTi files on the pericervical dentin and the smallest dentin thickness zones in mesial root canals of mandibular molars: an in vitro study.

OBJECTIVE: The aim of this study was to evaluate six files on the pericervical dentin (PCD) and the smallest dentin thickness zones (SDTZ) in mesial root canals of mandibular molars. MATERIALS AND METHODS: Sixty mandibular molars with two mesial canals and Vertucci configuration were aleatory allocated in 6 experimental groups of 10 molars and 20 root canals. Specimens were scanned before instrumentation using the SkyScan 1275 (Bruker microCT, Kontich, Belgium). Group 1 was treated with WaveOne Gold (WG), group 2 with Reciproc Blue (RB), group 3 with TRUShape (TS), group 4 with XP-endo Shaper (XP), group 5 with iRace (IR), and group 6 with TruNatomy (TN). After instrumentation, the molars were scanned again and the images recorded were reconstructed with the NRecon v.1.7 (Bruker micro-CT) and analyzed with CTAn v.1.20.8 software (Bruker micro-CT) quantifying the changes produced in the surface, volume, structure thickness, SMI, and centroids at the Pericervical Dentin area of the root canals (PCD) located from the root canal orifices at the floor of the pulp chamber to 4 mm in the apical direction, and the changes in the Smallest Dentin Thickness Zones (SDTZ) located (from the furcation to 4 mm and 7 mm in the apical direction. The data obtained were compared using Wilcoxon and ANOVA with a 5% significance level. RESULTS: XP and TN were similar in all the parameters (P >.05) at the PCD, but TN showed significant differences from WG, RB, TS, and IR (P <.05), while XP showed significant differences from WG (P <.05) in volume, surface, and structure thickness. Regarding the changes in the SDTZ, the amount of dentin removed was similar between the groups in both canals at the middle 1/3, at the cervical 1/3 for MB canals, and in ML canals for RB, TS, XP, IR, and TN (P>.05). The action of WG was significantly different from that of XP and TN in the cervical 1/3 of the ML canal (P <.05). CONCLUSIONS: XP and TN rotatory files with small taper and volume maintained better with minor changes at the PCD and SDTZ, while WG reciprocation file produced the largest change. All the files were maintained centered at the PCD, and their performances were safe with a minimal thickness higher 0.5 mm at the SDTZ, and without risk of perforation. TRIAL REGISTRATION: No clinical trials were indicated in this study. CLINICAL RELEVANCE: The choice of endodontic files is a relevant factor in the conservative performance of root canal treatments.

Methane emissions and 13C composition from beef steers consuming binary C3-C4 diets.

Improvements in forage nutritive value can reduce methane emission intensity in grazing ruminants. This study was designed to evaluate how the legume rhizoma peanut (Arachis glabrata; RP) inclusion into bahiagrass (Paspalum notatum) hay diets would affect intake and CH4 production in beef steers. We also assessed the potential to estimate the proportion of RP contribution to CH4 emissions using δ13C from enteric CH4. Twenty-five Angus-crossbred steers were randomly allocated to one of five treatments (five steers per treatment blocked by bodyweight): 1) 100% bahiagrass hay (0%RP); 2) 25% RP hay + 75% bahiagrass hay (25%RP); 3) 50% RP hay + 50% bahiagrass hay (50%RP); 4) 75% RP hay + 25% bahiagrass hay (75%RP); 5) 100% RP hay (100%RP). The study was laid out using a randomized complete block design, and the statistical model included fixed effect of treatment, and random effect of block. Methane emissions were collected using sulfur hexafluoride (SF6) technique, and apparent total tract digestibility was estimated utilizing indigestible neutral detergent fiber as an internal marker. A two-pool mixing model was used to predict diet source utilizing CH4 δ13C. Inclusion of RP did not affect intake or CH4 production (P > 0.05). Methane production per animal averaged 250 g CH4/d and 33 g CH4/kg dry matter intake, across treatments. The CH4 δ13C were -55.5, -60.3, -63.25, -63.35, and -68.7 for 0%RP, 25%RP, 50%RP, 75%RP, and 100%RP, respectively, falling within the reported ranges for C3 or C4 forage diets. Moreover, there was a quadratic effect (P = 0.04) on the CH4 δ13C, becoming more depleted (e.g., more negative) as the diet proportion of RP hay increased, appearing to plateau at 75%RP. Regression between predicted and observed proportions of RP in bahiagrass hay diets based on δ13C from CH4 indicate δ13C to be useful (Adj. R2 = 0.89) for predicting the contribution of RP in C3-C4 binary diets. Data from this study indicate that, while CH4 production may not always be reduced with legume inclusion into C4 hay diets, the δ13C technique is indeed useful for tracking the effect of dietary sources on CH4 emissions.

Investigating methods for reducing enteric methane emissions from ruminant livestock are important to reduce environmental impacts and improving production efficiency through reduced energy losses. This experiment evaluated the effects of increasing proportion of rhizoma peanut hay (a C3 legume) into bahiagrass hay (a C4 grass) on intake and methane production in beef steers. In addition, carbon stable isotopes (13C) of the methane emitted were used to back-calculate the diet components consumed. Angus-crossbred steers were randomly allocated to one of five hay diets (treatments): 1) 100% bahiagrass; 2) 25% rhizoma peanut + 75% bahiagrass; 3) 50% rhizoma peanut + 50% bahiagrass; 4) 75% rhizoma peanut + 25% bahiagrass; 5) 100% rhizoma peanut. Inclusion of rhizoma peanut did not affect intake or methane production, but apparent total tract digestibility increased as proportion of rhizoma peanut increased in the diet. The carbon stable isotope composition observed from enteric methane production was within the expected ranges for C3­C4 forage diets. Furthermore, the carbon stable isotope composition from enteric methane production was useful in predicting contributions from each diet source in C3­C4 binary diets.

Permanent Porosity in the Room-Temperature Magnet and Magnonic Material V(TCNE)2.

Materials that simultaneously exhibit permanent porosity and high-temperature magnetic order could lead to advances in fundamental physics and numerous emerging technologies. Herein, we show that the archetypal molecule-based magnet and magnonic material V(TCNE)2 (TCNE = tetracyanoethylene) can be desolvated to generate a room-temperature microporous magnet. The solution-phase reaction of V(CO)6 with TCNE yields V(TCNE)2·0.95CH2Cl2, for which a characteristic temperature of T* = 646 K is estimated from a Bloch fit to variable-temperature magnetization data. Removal of the solvent under reduced pressure affords the activated compound V(TCNE)2, which exhibits a T* value of 590 K and permanent microporosity (Langmuir surface area of 850 m2/g). The porous structure of V(TCNE)2 is accessible to the small gas molecules H2, N2, O2, CO2, ethane, and ethylene. While V(TCNE)2 exhibits thermally activated electron transfer with O2, all the other studied gases engage in physisorption. The T* value of V(TCNE)2 is slightly modulated upon adsorption of H2 (T* = 583 K) or CO2 (T* = 596 K), while it decreases more significantly upon ethylene insertion (T* = 459 K). These results provide an initial demonstration of microporosity in a room-temperature magnet and highlight the possibility of further incorporation of small-molecule guests, potentially even molecular qubits, toward future applications.

Use of Nanoparticles in Completion Fluids as Dual Effect Treatments for Well Stimulation and Clay Swelling Damage Inhibition: An Assessment of the Effect of Nanoparticle Chemical Nature.

The objective of this study is to evaluate the role of nanoparticles with different chemical structures in completion fluids (CF) in providing a positive dual effect for well stimulation and clay swelling damage inhibition. Six types of commercial (C) or synthesized (S) nanoparticles have been incorporated into a commercial completion fluid. Doses varied between 100 and 500 mg·L-1. CF-nanoparticles were evaluated by fluid-fluid, fluid-nanoparticle, and fluid-rock interactions. The adsorption isotherms show different degrees of affinity, which impacts on the reduction of the interfacial tension between the CF and the reservoir fluids. Fluid-fluid interactions based on interfacial tension (IFT) measurements suggest that positively charged nanoparticles exhibit high IFT reductions. Based on contact angle measurements, fluid-rock interactions suggest that ZnO-S, SiO2-C, SiO2-S, and ZrO2 can adequately promote water-wet rock surfaces compared with other nanomaterials. According to the capillary number, ZnO-S and MgO-S have a higher capacity to reduce both interfacial and surface restrictions for crude oil production, suggesting that completion fluid with nanoparticles (NanoCF) can function as a stimulation agent. The clay swelling inhibition test in the presence of ZnO-S-CTAB and MgO-S-CTAB nanoparticles showed a 28.6% decrease in plastic viscosity (PV), indicating a reduction in clay swelling. The results indicate that a high-clay environment can meet the completion fluid's requirements. They also indicate that the degree of clay swelling inhibition of the nanoparticles depends on their chemical nature and dosage. Finally, displacement tests revealed that CF with nanoparticles increased the oil linear displacement efficiency.

Prediction of Multiple Hydrogen Ligation at a Vanadium(II) Site in a Metal-Organic Framework.

Densifying hydrogen in a metal-organic framework (MOF) at moderate pressures can circumvent challenges associated with high-pressure compression. The highly tunable structural and chemical composition in MOFs affords vast possibilities to optimize binding interactions. At the heart of this search are the nanoscale characteristics of molecular adsorption at the binding site(s). Using density functional theory (DFT) to model binding interactions of hydrogen to the exposed metal site of cation-exchanged MFU-4l, we predict multiple hydrogen ligation of H2 at the first coordination sphere of V(II) in V(II)-exchanged MFU-4l. We find that the strength of this binding between the metal site and H2 molecules can be tuned by altering the halide counterion adjacent to the metal site and that the fluoride containing node affords the most favorable interactions for high-density H2 storage. Using energy decomposition analysis, we delineate electronic contributions that enable multiple hydrogen ligation and demonstrate its benefits for hydrogen adsorption and release at modest pressures.

Power from Geothermal Resources as a Co-product of the Oil and Gas Industry: A Review.

The increase in the global demand for energy and fossil fuel dependency is hindering efforts to reduce greenhouse gas (GHG) emissions. Geothermal resources supplement this increase in energy demand with reduced emissions because of their availability, base-load production profile, and climatic independence. Despite these advantages, the development of geothermal energy is limited because of different reasons such as subsurface exploration risk and high upfront capital cost for drilling and facility construction. However, similarities in infrastructure and operations between the oil and gas industry and the geothermal industry can optimize expense and development when exploiting geothermal resources. Thus, in this review, we present recent advances and applications of geothermal power systems in the oil and gas industry starting from the fundamentals and basic principles of geothermal energy and the organic Rankine cycle (ORC). These applications include the use of geothermal resources via abandoned wells, active wells, and paired thermal enhanced oil recovery processes with injection for fluid heating and energy production. Abandoned wells are alternatives that reduce costs in geothermal energy-use projects. The use of geothermal resources via active wells allows the valorization of a resource, such as the production of water, which is considered a byproduct of production activities in an oilfield. The use of thermally enhanced oil recovery processes enhances the energy conditions of fluids produced in the field, improving geothermal systems with fluids at higher temperatures. Finally, an overview is presented of the challenges and opportunities of geothermal energy in the oil industry where the requirement to improve the usage of technologies, such as the ORCs, with the working fluids used in the cycles, is highlighted. Furthermore, the importance of environmental studies and use of novel tools, such as nanotechnology, to improve the efficiency of geothermal energy usage is highlighted.

Stable isotopes of C and N differ in their ability to reconstruct diets of cattle fed C3-C4 forage diets.

Stable isotopes are useful for estimating livestock diet selection. The objective was to compare δ13C and δ15N to estimate diet proportion of C3-C4 forages when steers (Bos spp.) were fed quantities of rhizoma peanut (Arachis glabrata; RP; C3) and bahiagrass (Paspalum notatum; C4).Treatments were proportions of RP with bahiagrass hay: 100% bahiagrass (0%RP); 25% RP + 75% bahiagrass (25%RP); 50% RP + 50% bahiagrass (50%RP); 75% RP + 25% bahiagrass (75%RP); and 100% RP (100% RP). Feces, plasma, red blood cell (RBC), and hair were collected at 8-days intervals, for 32 days. Two-pool mixing model was utilized to back-calculate the proportion of RP based on the sample and forage δ13C or δ15N. Feces showed changes using δ13C by 8 days, and adj. R2 between predicted and observed RP proportion was 0.81 by 8 days. Plasma, hair, and RBC required beyond 32-days to reach equilibrium, therefore were not useful predictors of diet composition during the study. Diets were best represented using fecal δ13C at both 8-days and 32-days. By 32-days, fecal δ15N showed promise (R2 = 0.71) for predicting diet composition in C3-C4 diets. Further studies are warranted to further corroborate fecal δ15N as a predictor of diet composition in cattle.

Metal-organic frameworks as O2-selective adsorbents for air separations.

Oxygen is a critical gas in numerous industries and is produced globally on a gigatonne scale, primarily through energy-intensive cryogenic distillation of air. The realization of large-scale adsorption-based air separations could enable a significant reduction in associated worldwide energy consumption and would constitute an important component of broader efforts to combat climate change. Certain small-scale air separations are carried out using N2-selective adsorbents, although the low capacities, poor selectivities, and high regeneration energies associated with these materials limit the extent of their usage. In contrast, the realization of O2-selective adsorbents may facilitate more widespread adoption of adsorptive air separations, which could enable the decentralization of O2 production and utilization and advance new uses for O2. Here, we present a detailed evaluation of the potential of metal-organic frameworks (MOFs) to serve as O2-selective adsorbents for air separations. Drawing insights from biological and molecular systems that selectively bind O2, we survey the field of O2-selective MOFs, highlighting progress and identifying promising areas for future exploration. As a guide for further research, the importance of moving beyond the traditional evaluation of O2 adsorption enthalpy, ΔH, is emphasized, and the free energy of O2 adsorption, ΔG, is discussed as the key metric for understanding and predicting MOF performance under practical conditions. Based on a proof-of-concept assessment of O2 binding carried out for eight different MOFs using experimentally derived capacities and thermodynamic parameters, we identify two existing materials and one proposed framework with nearly optimal ΔG values for operation under user-defined conditions. While enhancements are still needed in other material properties, the insights from the assessments herein serve as a guide for future materials design and evaluation. Computational approaches based on density functional theory with periodic boundary conditions are also discussed as complementary to experimental efforts, and new predictions enable identification of additional promising MOF systems for investigation.

Nutritive value, silage fermentation characteristics, and aerobic stability of grass-legume round-baled silages at differing moisture concentrations with and without manure fertilization and microbial inoculation.

For baled silages, production of clostridial fermentation products can be exacerbated by exceeding normal moisture targets (45% to 55%), and/or by the application of dairy slurry before harvest. Our objectives were to test a microbial inoculant as a mitigant of clostridial products in high-moisture, grass-legume (52% ± 13.8% cool-season grasses, 44.0% ± 14.0% legumes [predominately alfalfa]) baled silages in swards that were fertilized with dairy slurry. A secondary objective was to examine the effects of bale moisture and inoculation on the aerobic stability of these fermented silages following exposure to air. After the first-cutting was removed, three manure treatments were applied as a whole-plot factor: 1) control (no manure); 2) slurry applied immediately to stubble (63,250 L/ha); or 3) slurry applied after a 1-wk delay (57,484 L/ha). An interactive arrangement of bale moisture (64.1% or 48.4%) and inoculation (yes or no) served as a subplot term in the experiment. The inoculant contained both homolactic (Lactococcus lactis 0224) and heterolactic (Lactobacillus buchneri LB1819) bacteria. The experimental design was analyzed as a randomized complete block with four replications, and the study included 48 experimental units (1.2 × 1.2-m round bales). Total fermentation acids were affected (P ≤ 0.021) by slurry application strategies, but this was likely related to inconsistent bale moisture across slurry-application treatments. Concentrations of butyric acid were low, and there were no detectable contrasts comparing manure treatments (mean = 0.05%; P ≥ 0.645). Bale moisture affected all measures of fermentation, with bales made at 64.1% moisture exhibiting a more acidic final pH (4.39 vs. 4.63; P < 0.001), less residual water-soluble carbohydrates (2.1% vs. 5.1%; P < 0.001), as well as greater lactic acid (4.64% vs. 2.46%; P < 0.001), acetic acid (2.26% vs. 1.32%; P < 0.001), and total fermentation acids (7.37% vs. 3.97%; P < 0.001). Inoculation also reduced pH (4.47 vs. 4.56; P = 0.029), and increased acetic acid (1.97% vs. 1.61%; P < 0.001) and 1,2-propanediol (1.09% vs. 0.72%; P < 0.001) compared to controls. During a 34-d aerobic exposure period, maximum surface bale temperatures were not affected (P ≥ 0.186) by any aspect of treatment, likely due to the prevailing cool ambient temperatures; however, yeast counts were numerically lower in response to greater (P < 0.001) production of acetic acid that was stimulated by both high bale moisture and inoculation.

The objectives of this research were to test an inoculant to mitigate production of clostridial products in high-moisture silage bales, where forages were treated with dairy slurry during the preceding growth cycle. Despite the application of dairy slurry, as well as greater-than-recommended bale moisture, only minimal concentrations of typical clostridial products were observed following fermentation. Inoculation had no effect on final concentrations of either ammonia-N or butyric acid. The lack of clostridial response might be explained by numerous strong rainfall events during the growth of these forages, prompt wrapping following baling, substrate adequacy, as well as an exceptionally low buffering capacity, particularly compared to most mixed, legume-grass swards harvested previously at this location. As a result, using a combination hetero- and homolactic inoculant to mitigate clostridial activity was inconclusive. Both bale moisture and inoculation had positive effects on concentrations of acetic acid following fermentation, and resulted in numerically reduced counts of yeasts following a 34-d exposure to air: however, surface bale temperatures remained cool, regardless of treatment, largely in response to the cool ambient temperatures that occurred in central Wisconsin during November.

Supplementation of Molasses-Based Liquid Feed for Cattle Fed on Limpograss Hay.

Two experiments were performed to evaluate the effects of (1) different levels of liquid supplementation (LS) based on molasses enriched with 32% (as fed; 45% on DM basis) crude protein (CP) on intake of Hemarthria altissima hay (LH), digestibility, and rumen fermentation, and (2) different levels of LS based on molasses enriched with 32% CP in the in vitro gas production in LH diets. In Exp. 1, twelve heifers and 12 adult male castrated and cannulated cattle were used. Treatments were allocated in a randomized block design, in four treatments: (CTL) access ad libitum to the LH; (SUP2) ad libitum access to LH and supplementation with 0.9 kg d−1; (SUP4) ad libitum access to LH and supplementation with 1.8 kg d−1 and; (SUP6) ad libitum access to LH with 2.7 kg d−1. In Exp. 2, treatments were carried out in a randomized block design with four different proportions of LH diet: (CTL) 100 LH, (SUP2) 85 LH and 15 LS, (SUP4) 70 LH and 30 LS, (SUP6) 55 LH and 45% LS. In Exp. 1, liquid molasses-based supplementation did not affect LH intake (p > 0.05). Molasses intake improved as the supply increased, not reducing the intake of LH. In Exp. 2, the addition of LS to the LH caused a change in the VFA profile, with an increase in propionate production in vitro.

Inclusion of a tannin-rich legume in the diet of beef steers reduces greenhouse gas emissions from their excreta.

The objectives of this study were to determine the emission of nitrous oxide (N2O), methane (CH4), and carbon dioxide (CO2), as well as the isotopic composition of N2O from excreta of beef steers fed 'AU Grazer' sericea lespedeza hay [SL; Lespedeza cuneata (Dum. Cours.) G. Don]. Fifteen Brahman × Angus crossbred steers were fed one of three experimental diets: 0, 50, or 100% inclusion of SL into 'Tifton 85' bermudagrass hay (Cynodon spp.). Gas sampling occurred on days 0, 1, 3, 5, 7, 14, 18, 25, and 32 after urine or feces application to static chambers for two experimental periods. Effect of the day after feces application (P < 0.001), while day × inclusion of SL interaction was observed in urine (P < 0.001) for all greenhouse gases (GHG) analyzed. Peaks of emission of all GHG in urine and feces occurred in the first days (P < 0.001), with days 3 and 5 being most depleted in 15N-N2O in feces, and days 3, 5, and 7, in urine (P < 0.001). Feeding SL to beef steers was effective in mitigating the emission of GHG from the excreta, but further research is necessary to investigate the mechanisms behind the reductions.

Fatigue Crack Arrest Induced by Localized Compressive Deformation.

The localized compressive deformation (LCD) effect generated by an indentation process at the crack tip on the fatigue crack growth of the 7075-T651 aluminum alloy is reported. Eccentrically loaded single-edge crack tension specimens (ESE(T)) were pre-cracked at a crack length of about 20 mm by applying a constant amplitude fatigue loading. Subsequently, the LCD process was performed by using a semi-spherical indenter with a radius of 16 mm to compress the crack tip zone at different forces (5.0, 7.0, 12.5, 13.5, 15.5 kN), applied on the opposite surfaces of the specimens. The fatigue cracking process was continued on the compressed samples until an overall crack length of about 30 mm was obtained. The compressive load and the number of delayed cycles is discussed in terms of crack length and crack tip opening displacement (CTOD). A direct relationship between the compressive force induced by the LCD process and the delay of the crack propagation due to the crack arrest was observed. This effect became evident at a compressive force of 5.0 kN, where the crack propagation was arrested for about 9000 cycles in comparison with the non-LCD sample. However, when the force increased, the crack arrest also increased. The crack was considered to be completely arrested at a compressive load of 15.5 kN, since the crack did not grow after the application of more than 3 × 106 cycles.

Composition and decomposition of rhizoma peanut (Arachis glabrata Benth.) belowground biomass.

Roots and rhizomes can play an important role in nutrient cycling, however, few studies have investigated how their decomposition pattern is affected by defoliation and time of the year. This 2-year study evaluated root-rhizome composition and decomposition of a warm-season rhizomatous perennial legume [rhizoma peanut (RP; Arachis glabrata Benth.)] under continuous stocking or when defoliated by clipping every 56 days. A 168-days incubation trial was performed to determine disappearance of biomass and N and changes in acid detergent fiber (ADF), acid detergent insoluble N (ADIN), and C:N ratio. Additionally, three 56-days incubations were performed each year to evaluate the disappearance coefficient (B0) and relative decay rate (k). There were no treatment differences in any response for the 168-days incubation. After 168 days, 21 and 60% of initial biomass and initial N remained, respectively. Relative decay rate for OM and N were 0.0088 and 0.0035 g g-1 day-1, respectively. Carbon-to-N ratio decreased from 29 at day 0 to 17 at day 168. Concentration of ADIN increased from 6.9 to 19.3 g kg-1, plateauing at day 79. The B0 and k for remaining OM and N were greater in late than early season and could be explained by greater N concentration and lesser C:N ratio. Rapid decomposition, difference in C:N ratio from day 0 to 168, and the increase in ADIN concentration during incubation indicate large amounts of root-rhizome-soluble C at initiation of incubation. These data indicate that RP root-rhizome turnover is more responsive to season than defoliation frequency.

Multispecies biofilm removal by XP-endo Finisher and passive ultrasonic irrigation: A scanning electron microscopy study.

The aim was to assess the effect of XP-endo Finisher (XPF) on multispecies biofilm removal, in comparison with passive ultrasonic irrigation (PUI) and conventional syringe irrigation (CSI), by scanning electron microscope (SEM). Fifty mandibular first premolars were instrumented, longitudinally sectioned. The split halves were incubated for 4 days with a broth obtained from three bacteria strains: Enterococcus faecalis, Eikenella corrodens and Streptococcus anginosus. Subsequently, the re-approximated split halves were irrigated with 4% sodium hypochlorite (NaOCl) or water using CSI, and the final irrigation protocols were CSI with 4% NaOCl (CSI+4%NaOCl), PUI+4%NaOCl, XPF+4%NaOCl and CSI+water. The analysis of biofilm removal was performed using SEM images. There were no differences between PUI and XPF (P > 0.05), and both groups promoted higher biofilm removal than CSI+4%NaOCl and CSI+water groups (P < 0.05). It can be concluded the multispecies biofilm removal was significantly improved using XPF and PUI when compared to CSI.

Ambient-Temperature Hydrogen Storage via Vanadium(II)-Dihydrogen Complexation in a Metal-Organic Framework.

The widespread implementation of H2 as a fuel is currently hindered by the high pressures or cryogenic temperatures required to achieve reasonable storage densities. In contrast, the realization of materials that strongly and reversibly adsorb hydrogen at ambient temperatures and moderate pressures could transform the transportation sector and expand adoption of fuel cells in other applications. To date, however, no adsorbent has been identified that exhibits a binding enthalpy within the optimal range of -15 to -25 kJ/mol for ambient-temperature hydrogen storage. Here, we report the hydrogen adsorption properties of the metal-organic framework (MOF) V2Cl2.8(btdd) (H2btdd, bis(1H-1,2,3-triazolo[4,5-b],[4',5'-i])dibenzo[1,4]dioxin), which features exposed vanadium(II) sites capable of backbonding with weak π acids. Significantly, gas adsorption data reveal that this material binds H2 with an enthalpy of -21 kJ/mol. This binding energy enables usable hydrogen capacities that exceed that of compressed storage under the same operating conditions. The Kubas-type vanadium(II)-dihydrogen complexation is characterized by a combination of techniques. From powder neutron diffraction data, a V-D2(centroid) distance of 1.966(8) Å is obtained, the shortest yet reported for a MOF. Using in situ infrared spectroscopy, the H-H stretch was identified, and it displays a red shift of 242 cm-1. Electronic structure calculations show that a main contribution to bonding stems from the interaction between the vanadium dπ and H2 σ* orbital. Ultimately, the pursuit of MOFs containing high densities of weakly π-basic metal sites may enable storage capacities under ambient conditions that far surpass those accessible with compressed gas storage.

Micro-computed Tomographic Assessment and Comparative Study of the Shaping Ability of 6 Nickel-Titanium Files: An In Vitro Study.

INTRODUCTION: This research studies and compares the shaping ability of WaveOne Gold (WG; Dentsply Tulsa Dental Specialties, Tulsa, OK), the Reciproc Blue (RB; VDW, Munich, Germany), TRUShape (TS, Dentsply Tulsa Dental Specialties), XP-endo Shaper (XP; FKG, La Chaux-de-Fonds, Switzerland), iRace (IR, FKG), and TruNatomy (TN; Dentsply Sirona, Ballaigues, Switzerland) in the preparation of moderately curved canals and using micro-computed tomographic technology. METHODS: Sixty lower molars with 2 mesial canals were randomly distributed into 6 groups of 10 molars and 20 canals per group (n = 20). Specimens were scanned before and after preparation using the SkyScan 1275 (Bruker microCT, Kontich, Belgium). Group 1 was treated with WG, group 2 with RB, group 3 with TS, group 4 with XP, group 5 with IR, and group 6 with TN. After instrumentation, researchers quantified the changes produced in the canal geometry in terms of surface, volume, structure thickness, surface convexity index, structure model index, percentage of surface touched, and centroids. Wilcoxon and analysis of variance tests were performed to compare the values before and after preparation and the differences between groups. The significance level was established at 5%. RESULTS: There were no significant differences between WG and RB (P > .05) and between TN and XP (P > .05). TN had significant differences with WG, RB, TS, and IR (P < .05). All the files produced similar apical transportation (P > .05). CONCLUSIONS: WG and RB and TN and XP had similar shaping effectivity. TS and WG touched the highest percentages of canal surfaces (81% and 73%, respectively) but produced the biggest changes in the canal anatomy. TN and XP better kept the canal anatomy, but TN touched the lowest percentage of canal surface (50%). All the files used were able to clean and to shape moderately curved canals with minimal apical transportation.

Cutting efficiency of heat-treated nickel-titanium single-file systems at different incidence angles.

Cutting efficiency of Reciproc R25 (REC) and Reciproc blue R25 (REB) at different inclinations was evaluated. Sixty new files were tested at 90°, 70° and 45° of inclination in relation to the sample (n = 10), using a customised machine. All files were activated in reciprocation against standardised gypsum blocks for 120 s. Cutting efficiency was determined by measuring the block weight loss with an analytical balance and measuring the length of the block surface cut using a digital calliper. Data were statistically analysed (two-way ANOVA, Bonferroni t-test) with the significance level set at P < 0.05. There was no difference for REC among the tested angles. REB had no statistical difference between 90° and 70°; however, its cutting efficiency significantly increased at 45°. There was a significant difference between REC and REB at 45° only. Under these conditions, increased file inclination to 45° and blue heat treatment improved cutting efficiency of reciprocating files.

Lipid Receptor GPR31 (G-Protein-Coupled Receptor 31) Regulates Platelet Reactivity and Thrombosis Without Affecting Hemostasis.

OBJECTIVE: 12-LOX (12-lipoxygenase) produces a number of bioactive lipids including 12(S)-HETE that are involved in inflammation and platelet reactivity. The GPR31 (G-protein-coupled receptor 31) is the proposed receptor of 12(S)-HETE; however, it is not known whether the 12(S)-HETE-GPR31 signaling axis serves to enhance or inhibit platelet activity. Approach and Results: Using pepducin technology and biochemical approaches, we provide evidence that 12(S)-HETE-GPR31 signals through Gi to enhance PAR (protease-activated receptor)-4-mediated platelet activation and arterial thrombosis using both human platelets and mouse carotid artery injury models. 12(S)-HETE suppressed AC (adenylyl cyclase) activity through GPR31 and resulted in Rap1 (Ras-related protein 1) and p38 activation and low but detectable calcium flux but did not induce platelet aggregation. A GPR31 third intracellular (i3) loop-derived pepducin, GPR310 (G-protein-coupled receptor 310), significantly inhibited platelet aggregation in response to thrombin, collagen, and PAR4 agonist, AYPGKF, in human and mouse platelets but relative sparing of PAR1 agonist SFLLRN in human platelets. GPR310 treatment gave a highly significant 80% protection (P=0.0018) against ferric chloride-induced carotid artery injury in mice by extending occlusion time, without any effect on tail bleeding. PAR4-mediated dense granule secretion and calcium flux were both attenuated by GPR310. Consistent with these results, GPR310 inhibited 12(S)-HETE-mediated and PAR4-mediated Rap1-GTP and RASA3 translocation to the plasma membrane and attenuated PAR4-Akt and ERK activation. GPR310 caused a right shift in thrombin-mediated human platelet aggregation, comparable to the effects of inhibition of the Gi-coupled P2Y12 receptor. Co-immunoprecipitation studies revealed that GPR31 and PAR4 form a heterodimeric complex in recombinant systems. CONCLUSIONS: The 12-LOX product 12(S)-HETE stimulates GPR31-Gi-signaling pathways, which enhance thrombin-PAR4 platelet activation and arterial thrombosis in human platelets and mouse models. Suppression of this bioactive lipid pathway, as exemplified by a GPR31 pepducin antagonist, may provide beneficial protective effects against platelet aggregation and arterial thrombosis with minimal effect on hemostasis.