Activated Monomer Polymerization of an N-Sulfonylazetidine.

Previously, N-(methanesulfonyl)azetidine (MsAzet) was found to polymerize anionically via ring-opening at temperatures >100 °C to form p(MsAzet) in the presence of an anionic initiator. In the current report, potassium(azetidin-1-ylsulfonyl) methanide (KMsAzet), formed from deprotonation of the methanesulfonyl group of MsAzet by KHMDS, is shown to undergo spontaneous AROP at room temperature to form p(N-K-MsAzet). The structure of p(N-K-MsAzet) differs from that of p(MsAzet), as the sulfonyl groups are incorporated into the polymer backbone of p(N-K-MsAzet). Reaction of p(N-K-MsAzet) with MeOH produces p(N-H-MsAzet), a semicrystalline polymer with a structure like that of polyamides, but with sulfonylamides in place of the carboxamides found in polyamides. Reaction of p(N-K-MsAzet) with benzyl bromide results in the formation of amorphous p(N-Bn-MsAzet). P(N-K-MsAzet) is hypothesized to form via an activated monomer anionic polymerization; this is supported by polymerization kinetic data and structural characterization of the resulting polymers.

Effect of Cellulose Nanofibrils and TEMPO-mediated Oxidized Cellulose Nanofibrils on the Physical and Mechanical Properties of Poly(vinylidene fluoride)/Cellulose Nanofibril Composites.

Cellulose nanofibrils (CNFs) are high aspect ratio, natural nanomaterials with high mechanical strength-to-weight ratio and promising reinforcing dopants in polymer nanocomposites. In this study, we used CNFs and oxidized CNFs (TOCNFs), prepared by a 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-mediated oxidation process, as reinforcing agents in poly(vinylidene fluoride) (PVDF). Using high-shear mixing and doctor blade casting, we prepared free-standing composite films loaded with up to 5 wt % cellulose nanofibrils. For our processing conditions, all CNF/PVDF and TOCNF/PVDF films remain in the same crystalline phase as neat PVDF. In the as-prepared composites, the addition of CNFs on average increases crystallinity, whereas TOCNFs reduces it. Further, addition of CNFs and TOCNFs influences properties such as surface wettability, as well as thermal and mechanical behaviors of the composites. When compared to neat PVDF, the thermal stability of the composites is reduced. With regards to bulk mechanical properties, addition of CNFs or TOCNFs, generally reduces the tensile properties of the composites. However, a small increase (~18%) in the tensile modulus was observed for the 1 wt % TOCNF/PVDF composite. Surface mechanical properties, obtained from nanoindentation, show that the composites have enhanced performance. For the 5 wt % CNF/PVDF composite, the reduced modulus and hardness increased by ~52% and ~22%, whereas for the 3 wt % TOCNF/PVDF sample, the increase was ~23% and ~25% respectively.

Preparation and Characterization of Polyhedral Oligomeric Silsesquioxane-Containing, Titania-Thiol-Ene Composite Photocatalytic Coatings, Emphasizing the Hydrophobic-Hydrophilic Transition.

Coatings prepared from titania-thiol-ene compositions were found to be both self-cleaning, as measured by changes in water contact angle, and photocatalytic toward the degradation of an organic dye. Stable titania-thiol-ene dispersions at approximately 2 wt % solids were prepared using a combination of high-shear mixing and sonication in acetone solvent from photocatalytic titania, trisilanol isobutyl polyhedral oligomeric silsesquioxane (POSS) dispersant, and select thiol-ene monomers, i.e., trimethylolpropane tris(3-mercaptopropionate) (TMPMP), pentaerythritol allyl ether (APE), and 1,3,5-triallyl-1,3,5-triazine-2,4,6(1H,3H,5H)-trione (TTT). The dispersed particle compositions were characterized by DLS and TEM. The synthetic methods employed yield a strongly bound particle/POSS complex, supported by IR, 29Si NMR, and TGA. The factors of spray techniques, carrier solvent volatility, and particle size and size distributions, in combination, likely all contribute to the highly textured but uniform surfaces observed via SEM and AFM. Polymer composites possessed thermal transitions (e.g., Tg) consistent with composition. In general, the presence of polymer matrix provided mechanical integrity, without significantly compromising or prohibiting other critical performance characteristics, such as film processing, photocatalytic degradation of adsorbed contaminants, and the hydrophobic-hydrophilic transition. In all cases, coatings containing photocatalytic titania were converted from superhydrophobic to superhydrophilic, as defined by changes in the water contact angle. The superhydrophilic state of samples was considered persistent, since long time durations in complete darkness were required to observe any significant hydrophobic return. In a preliminary demonstration, the photocatalytic activity of prepared coatings was confirmed through the degradation of crystal violet dye. This work demonstrates that a scalable process can be found to prepare titania-thiol-ene coatings having improved coating properties which also exhibit photocatalytic and self-cleaning attributes.