Evaluation of crude watermelon oil as lubricant in cylindrical turning of AISI 1525 steel employing Taguchi and grey relational analyses techniques.

Cutting fluids are used for cooling and lubricating the machining area of components used in manufacturing industries such as aerospace, automotive, petroleum, and heavy machinery. Mineral oils derived from petroleum are commonly utilized as cutting fluids. Mineral oil is hazardous to the health of workers and damaging to the environment. There is a need for a substitute for mineral oil. Vegetable oil is increasingly being used as a cutting fluid. Vegetable oils are easily accessible and have benefits including excellent biodegradability, resistance to fire, low humidity rates, and a low coefficient of expansion under heat. This study adopts watermelon oil as a lubricant in MQL machining of AISI 1525 steel using tungsten tools. In the experiment, the feed rate, depth of cut (DC) and spindle speed were varied using the Taguchi L9 orthogonal array. Grey relational analysis was conducted to obtain optimum cutting parameters for surface roughness, machine vibration, and cutting temperature. Hardness and microstructural analysis of the workpiece were also conducted. Results showed that vegetable oil performed much more effectively than mineral oil in most experiments. The DC was shown to be the most efficient cutting parameter after applying ANOVA analysis based on the parameters that were evaluated. Additionally, models for cutting temperature, machine vibration, and surface roughness values have been developed with accuracy between 69.73 % and 99.05 %. The hardness of the workpiece increases with an increase in diameter, which was attributed to the increase in the steel rod (workpiece) cross-sectional area and the likelihood of a more uniform stress distribution. Moreover, finer grain sizes were observed at 70 mm diameter, with the predominant presence of pearlites. These characteristics were reportedly beneficial to the material's toughness and strength.

Optimization of the mechanical properties of polyester/coconut shell ash (CSA) composite for light-weight engineering applications.

The mechanical properties of coconut shell ash (CSA) reinforced polyester composite have been optimized. Various test specimens were developed by dispersing 10, 20, 30 and 40 wt.%, of CSA in unsaturated polyester resin in decreasing particle sizes of 40, 30, and 20 µm in an open mould using hand lay-up technique. Tensile, flexural, and impact strengths, as well as tensile and flexural moduli and Shore D hardness of all test samples were determined. The results showed that 10-20 wt.% CSA increased tensile, flexural, impact strengths and flexural modulus for all particle sizes, but 30-40 wt. % CSA engendered depreciation in corresponding performance. For all particle sizes, 10-40 wt. percent CSA resulted in an increase in tensile strength, whereas 10-40 wt. percent resulted into a linear increase in Shore D hardness. Further observation portrayed that in each case, the finest CSA (20 µm) have the optimum result. Statistical analysis carried out on experimental outcomes confirmed the experimental variables (particle proportion and sizes) to be significant. From the surface plot, the strength responses revealed more dependence on the individual variables than their interactions. Regression models developed for individual responses are termed statistically fit in representing the experimental data.

Annealing temperature variation and its influence on the self-cleaning properties of TiO2 thin films.

Titanium dioxide (TiO2) is an important material in science and engineering because of its basic and synthetic properties. Nevertheless, there is a dearth of reports in the open literature focusing on its ability to self-clean under temperature changes. In this study, we used the spin coating technique to produce TiO2 thin films to evaluate its self-cleaning ability after annealing at different temperatures. The TiO2 sol was obtained through an endothermal sol-gel process, and the gel was coated on a glass substrate using a spin coater. The deposited films were then annealed at 400 °C, 600 °C, and 800 °C for 1 h. The influence of annealing temperature variation on the self-cleaning properties of the thin film was characterized using X-ray diffraction, scanning electron microscope; Fourier transformed infrared spectrometric analysis and UV-vis spectrophotometer. A test to ascertain self-cleaning was conducted using the degradation of methylene blue, and the different films were tested for durability. The durability test confirmed the connection between solid coating and substrate at all annealing temperatures. Thin films annealed at 600 °C revealed the best self-cleaning properties. The morphological analysis revealed snowflake shapes uniformly distributed over the substrate at 400 °C, and agglomeration improved as the annealing temperature increased. Structural analysis showed an increase in crystallinity with an increase in annealing temperature for both rutile and anatase phases. At three different temperatures, the chemical bond and the absorption band pattern followed the same path, although the peak intensity declined with temperature rise. Finally, the optical bandgap of the thin coated TiO2 declined from 3.39 eV to 3.20 eV as the binding temperature increased from 400 to 800 °C.

Joint integrity evaluation of laser beam welded additive manufactured Ti6Al4V sheets.

The feasibility of joining laser metal deposited Ti6Al4V sheets using laser beam welding was investigated in this article. The additive manufactured sheets were joined using a 3 kW CW YLS-2000-TR ytterbium laser system. The mechanical properties and microstructure of the welded additive manufactured parts (AM welds) were compared with those of the wrought sheets welded using the same laser process. The welds were characterized and compared in terms of bead geometry, microhardness, tensile strength, fractography, and microstructure. The differences in characteristics are majorly found in the width of the bead and tensile strength. The bead width of AM welds appear wider than the wrought welds, and the wrought welds exhibited higher tensile strength and ductility than the AM welds.

Using psychometric ability to improve education in ultrasound-guided regional anaesthesia: a multicentre randomised controlled trial.

The learning curve for novices developing regional anaesthesia skills, such as real-time ultrasound-guided needle manipulation, may be affected by innate visuospatial ability, as this influences spatial cognition and motor co-ordination. We conducted a multinational randomised controlled trial to test if novices with low visuospatial ability would perform better at an ultrasound-guided needling task with deliberate practice training than with discovery learning. Visuospatial ability was evaluated using the mental rotations test-A. We recruited 140 medical students and randomly allocated them into low-ability control (discovery learning), low-ability intervention (received deliberate practice), high-ability control, and high-ability intervention groups. Primary outcome was the time taken to complete the needling task, and there was no significant difference between groups: median (IQR [range]) low-ability control 125 s (69-237 [43-600 s]); low-ability intervention 163 s (116-276 [44-600 s]); high-ability control 130 s (80-210 [41-384 s]); and high-ability intervention 177 s (113-285 [43-547 s]), p = 0.06. No difference was found using the global rating scale: mean (95%CI) low-ability control 53% (95%CI 46-60%); low-ability intervention 61% (95%CI 53-68%); high-ability control 63% (95%CI 56-70%); and high-ability intervention 66% (95%CI 60-72%), p = 0.05. For overall procedure pass/fail, the low-ability control group pass rate of 42% (14/33) was significantly less than the other three groups: low-ability intervention 69% (25/36); high-ability control 68% (25/37); and high-ability intervention 85% (29/34) p = 0.003. Further research is required to determine the role of visuospatial ability screening in training for ultrasound-guided needle skills.

Morphological investigation and mechanical behaviour of agrowaste reinforced aluminium alloy 8011 for service life improvement.

Aluminium composite materials are beneficial in most engineering applications, most notably, because of their lightweight to strength ratio amongst many others. This study reports the reinforcement of aluminium alloy 8011 with cow horn and corncob in varying weight percentages of 5wt%, 10wt%, 15wt% and 20wt%. This study adopted the Stir casting method based on availability and cost-effectiveness as the cheapest method amongst others. The developed composite materials were in eight different samples alongside one control sample of the aluminium alloy base material. The samples used for this experimental study were tested for tensile strength, hardness and microstructural analysis. The outcome of the study shows that the sample with 20wt% of cow horn reinforcement gave the best-improved properties in terms of yield strength, ultimate tensile strength (UTS) and hardness with percentage improvement of 57%, 52.6% and 54.4% respectively. Hardness was also improved with 52.6% over the control sample with the 15wt% cow horn reinforced sample. Cow horn of 10wt% reinforcement improved the material by 61%. The results shown have justified the relevant effect of agro-waste materials in composite development.

Is mechanical ventilation associated with intraventricular hemorrhage in preterm infants?

BACKGROUND: The impact of mechanical ventilation on the incidence of intraventricular hemorrhage (IVH) in very low birth weight (VLBW) infants is unknown, simply because the vast majority of these infants have been routinely intubated and mechanically ventilated. There is a growing interest in the use of early nasal continuous positive airway pressure (ENCPAP) and avoiding mechanical ventilation. OBJECTIVES: To examine the role of mechanical ventilation since delivery room in determining severe IVH in VLBW infants in two neonatal units that follow the same strategy of respiratory management using ENCPAP. METHODS: We collected data on delivery room intubation and mechanical ventilation during the first 3 days of life in VLBW infants. Logistic regression model was constructed to test the relationship between early mechanical ventilation and the diagnosis of severe IVH after controlling for significant confounding variables, such as BW, gender, duration of mechanical ventilation, and partial pressure of CO(2) (PCO(2)). RESULTS: Of the studied 340 VLBW, 35 infants had severe IVH; most of them received mechanical ventilation that started either in the delivery room (n=12) or during the first (n=10) and second (n=3) days of life. Severe IVH was independently associated with lower BW, mechanical ventilation in the delivery room, and the cumulative duration of mechanical ventilation during the first 3 days. The adjusted odds ratio for severe IVH in infants intubated in delivery room was (OR=2.7, CI: 1.1-6.6, P=0.03). Severe IVH was not associated with gender, prenatal steroids, early sepsis, or patent ductus arteriosus. CONCLUSIONS: Mechanical ventilation plays a role in predicting severe IVH. Both the time at which ventilation was initiated and the duration of ventilation are important determinants of severe IVH. Risk for severe IVH in infants who were never intubated in delivery room or during the first 3 days of life is miniscule.

The influence of cochlear shape on low-frequency hearing.

The conventional theory about the snail shell shape of the mammalian cochlea is that it evolved essentially and perhaps solely to conserve space inside the skull. Recently, a theory proposed that the spiral's graded curvature enhances the cochlea's mechanical response to low frequencies. This article provides a multispecies analysis of cochlear shape to test this theory and demonstrates that the ratio of the radii of curvature from the outermost and innermost turns of the cochlear spiral is a significant cochlear feature that correlates strongly with low-frequency hearing limits. The ratio, which is a measure of curvature gradient, is a reflection of the ability of cochlear curvature to focus acoustic energy at the outer wall of the cochlear canal as the wave propagates toward the apex of the cochlea.

Is the new definition of bronchopulmonary dysplasia more useful?

OBJECTIVE: To determine the incidence of bronchopulmonary dysplasia (BPD) in low birth weight (LBW) infants <1251 g managed with early bubble nasal continuous positive airway pressure (NCPAP) and a gentle ventilation strategy using the newly proposed definition for BPD and the previous definitions. METHODS: Needs for supplemental oxygen and positive pressure (positive pressure ventilation or NCPAP) during initial hospitalization were evaluated in 266 inborn LBW infants (birth weight <1251 g). The data were categorized in three weight groups, <751, 751 to 1000 and 1001 to 1250 g and the incidence of BPD was computed in survivors based on oxygen need at 28 days, 36 weeks postmenstrual age (PMA) and the new severity of BPD criteria, that is, mild BPD: need for supplemental oxygen > or =28 days, but not at 36 weeks PMA; moderate BPD: need for supplemental oxygen > or =28 days and <30% at 36 weeks PMA and severe BPD: need for supplemental oxygen > or =28 days, and >30% at 36 weeks PMA and/or positive pressure at 36 weeks PMA. Further, BPD-associated comorbidities and short-term outcome data during hospitalization were compared among the groups, defined by severity of BPD. RESULTS: Among LBW infants <1251 g, the incidences of BPD at 28 days and 36 weeks PMA were 21.1 and 7.4% respectively. Using the newly defined criteria, the incidences of mild, moderate and severe BPD were 13.5, 4.8 and 2.6%, respectively. In total, 64.6% of these infants had mild BPD and 70.8% weighed <751 g at birth. Associated comorbidities correlated significantly with grades of underlying pulmonary disease. Also, significantly longer hospital stay, discharge at a higher PMA and lower growth velocity was observed with increasing grades of BPD. CONCLUSIONS: The new system for grading the severity of BPD offers a better description of underlying pulmonary disease and correlates with the infant's maturity, growth and overall severity of illness. Whether it will have a role in predicting long-term outcome remains to be determined.

Color and duplex Doppler sonography of hemangiopericytoma.

We report the color Doppler sonographic features in a case of hemangiopericytoma of the thigh in a 52-year-old woman. Color Doppler sonography demonstrated the vascularity of the tumor, and spectral analysis showed waveform changes that suggested the presence of intratumoral arteriovenous shunting. The color Doppler findings correlated well with angiographic findings. Color Doppler sonography can demonstrate intratumoral arteriovenous shunting in hemangiopericytoma and may be used to help avoid profuse bleeding when performing a preoperative biopsy.

Effects of temperature on radiochemical purity and immunoreactivity of radiolabeled monoclonal antibody 1H10.

OBJECTIVE: This study was undertaken to investigate the effects of temperature on preserving the radiochemical purity and immunoreactivity of 125I- and 131I-labeled monoclonal antibody (MAb) 1H10--an antibody against human cervical carcinoma cell-surface antigen. METHODS: An antibody-irrelevant human melanoma cell line, H2269, served as the control group. Iodine-125 and 131I radiolabeling of MAbs 1H10 and H2669 was performed by the chloramine-T method. All the prepared MAbs were divided into aliquots and stored at 4, -20, and -70 degrees C for 2-14 d. The radiochemical purity and immunoreactivity of the labeled antibodies in set conditions were measured by thin-layer chromatography and a modified index, respectively, after a single freeze-and-thaw cycle. RESULTS: Reduced release of free radioiodide and better preservation of immunoreactivity were observed in the radiolabeled MAbs stored at -70 degrees C than in those stored at -20 degrees C or 4 degrees C. The extent of free iodide dissociation and immunologic binding degradation of 125I-labeled MAb 1H10 appeared milder than that of 131I-labeled MAb under the same conditions. However, both 125I- and 131I-labeled MAb stored at -70 degrees C or -20 degrees C retained more than 90% radiochemical purity for at least 3d. CONCLUSION: Freezing provides an appropriate alternative for reducing radiolysis and preserving immunoreactivity of radioiodinated MAbs. MAb 1H10, labeled with either 125I or 131I and stored at temperatures of -20 degrees C or below for 3 d after labeling, appeared stable in both radiolabeling and binding studies in vitro and was still acceptable for in vivo use.

Krypton-81m ventilation and technetium-99m macroaggregated albumin perfusion scintigraphy for detection of pulmonary embolism: the first experience in Taiwan.

BACKGROUND: This study was designed to assess whether the self-made (Institute of Nuclear Energy Research, Taiwan) krypton (Kr)-81m could be used as a ventilation agent to detect patients with suspected pulmonary embolism (PE). In addition, xenon (Xe)-133 ventilation scintigraphy was also performed for comparison. METHODS: Forty patients with suspected PE were studied. Each patient received Kr-81m ventilation, Xe-133 ventilation and technetium (Tc)-99m macroaggregated albumin (MAA) perfusion studies on the same day. Images were judged using the criteria of the modified Prospective Investigation of Pulmonary Embolism Diagnosis (PIOPED). For those with a high or intermediate probability of PE on lung scans and normal pulmonary function tests, anticoagulants were given and patients were monitored with Tc-99m MAA perfusion studies after treatment. The final diagnosis was based on chest radiography, pulmonary function tests and lung scans. RESULTS: All 40 patients successfully underwent lung scans. Of these, 11 had PE. Ten of the 11 cases were detected using Kr-81m ventilation and Tc-99m MAA perfusion studies, resulting in a sensitivity of 91%. Seven of 11 cases were detected using Xe-133 ventilation and Tc-99m MAA perfusion studies, resulting in a sensitivity of 64%. Of the 11 patients with PE, four had PE alone; Kr-81m and Xe-133 results agreed in three patients, but Kr-81m detected PE in the remaining patient. Of the remaining seven patients who suffered from PE with obstructive airway disease, Kr-81m and Xe-133 agreed in four, but Kr-81m detected PE in another two patients and one case was missed by both studies. CONCLUSIONS: Self-made Kr-81m was safe and effective for ventilation scintigraphy in humans. When Kr-81m was used for the detection of PE, it was particularly advantageous when PE occurred in small areas of the lungs or when the patient with PE had concurrent obstructive airway disease.

Glucocorticoid-regulated trafficking of mouse mammary tumor virus proteins in permeabilized hepatoma cells. Requirements of intracellular membrane transport for maturation of the cytoplasmic phosphorylated polyprotein.

Glucocorticoids coincidentally regulate the localization of mouse mammary tumor virus (MMTV) glycoproteins and maturation of viral phosphoproteins in viral infected rat hepatoma cells. To test for a functional interaction between MMTV transmembrane glycoproteins and cytoplasmic phosphoproteins, the bacterial cytolysin streptolysin-O was utilized to selectively permeabilize the plasma membrane and reconstitute exocytic trafficking. Streptolysin-O-permeabilized M1.54 cells pretreated with glucocorticoids retained the capability for proteolytic processing, cell surface delivery, and externalization of MMTV glycoproteins as determined by immunoprecipitation and immunofluorescence microscopy. The efficient maturation of MMTV phosphoproteins indicated that these viral proteins are properly transported near or to the plasma membrane in permeabilized cells. These maturation events in semi-intact cells were dependent on the addition of cell cytosol and were specifically inhibited by the membrane impermeant GTP analog guanosine 5'3-O-(thio)triphosphate, an agent known to impede vesicular transport of membrane proteins, but which has not previously been shown to alter cytoplasmic protein maturation or transport. The addition of anti-MMTV antibodies directed against the cytoplasmic domain of the glycoprotein precursor to transport competent semi-intact M1.54 cells resulted in the dramatic inhibition of both MMTV glycoprotein and phosphoprotein maturation. These results were not obtained using either preimmune sera or antiserum specific for the luminal portion of the glycoprotein precursor. Our findings suggest that the functional interaction of cytosolic MMTV phosphoproteins with the cytoplasmic domain of the viral membrane glycoprotein is required for the efficient transport and processing of each class of proteins in glucocorticoid-treated cells and provides the first evidence for the involvement of vesicular transport in the delivery and maturation of cytoplasmic viral proteins at the plasma membrane or the pericellular region.

Cryptococcus albidus isolated from pigeon excreta in Taiwan.

Cryptococcus albidus (Saito) Skinner, found frequently in the air of El-Minia, Egypt; in New Zealand and Budapest, and isolated occasionally from clinical specimens, has now been recognized as the cause of human diseases. Since isolation of this fungus from pigeon droppings has not previously been reported, this first paper reports results of its drug-susceptibility testing to gentamicin and 5-fluorocytosine, as well as its fungal cell antigenic cross reactivity with C. neoformans as detected by a Latex-Crypto-Antigen Detection System (LCAS).

Differential identification of Candida species and other yeasts by analysis of [35S]methionine-labeled polypeptide profiles.

This paper describes a scheme for differential identification of Candida species and other yeasts based on autoradiographic analysis of protein profiles of [35S]methionine-labeled cellular proteins separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Using ATCC strains as references, protein profile analysis showed that different Candida and other yeast species produced distinctively different patterns. Good agreement in results obtained with this approach and with other conventional systems was observed. Being accurate and reproducible, this approach provides a basis for the development of an alternative method for the identification of yeasts isolated from clinical specimens.

A modified method for rapid mycological diagnosis of Tinea unguium in Taiwan, Republic of China.

This is a study to modify and simplify the classical laboratory procedures of mycological diagnosis of Tinea unguium. By means of a tube KOH digestion technique for microscopic examination of nail clippings and a paper disc transfer technique using a more uniform wool-fiber-yeast extract culture fluid as inoculum for all tests necessary for fungal identification, dermatophytes can be identified to a species level. To authenticate the advantage of the etiologic diagnosis of Tinea unguium by mycological studies, the promising result of our previous clinical therapeutic trial with Griseofulvin was presented.