Effect of microstructural elongation on backscattered field: Intensity measurement and multiple scattering estimation with a linear transducer array.

The effect of microstructural elongation on ultrasonic backscattered fields was studied. Two methods for determining the elongation direction of macrozones in titanium alloys, using the anisotropic spatial coherence of the backscattered field, are presented. Both methods use a phased array attached on a rotative holder that records the array response matrix at several angles. Two titanium alloys were investigated: TA6V and Ti17. TA6V exhibited a strong macrozone elongation, whereas Ti17 macrozones were found equiaxial. The first method is based on the measurement of backscattered intensity in function of the probe angle relative to the macrozones elongation direction. An angular dependence of backscattered intensity is observed in presence of elongated scatterers, and their elongation direction is collinear with the probe direction corresponding to a minimal intensity. This variability is linked to both piezoelectric shape and the backscattered field spatial properties. The second method is based on the measurement of the relative proportion of single to multiple scattering in a diffusive media, using a simplified version of the single scattering filter developed in Aubry and Derode (2009). It allows the measurement of the level of multiple scattering: both titanium alloys exhibited strong multiple scattering. The elongation direction was determined as the direction of minimal multiple scattering. Furthermore, these results were confirmed by the measurement of the coherent backscattering cone on both samples.

Estimation of trabecular thickness using ultrasonic backcatter.

We present a method to estimate trabecular thickness (Tb.Th) in trabecular bones from ultrasound backscatter measurements. The estimation scheme is based on a nonlinear adjustment of predictions from a model to experimental data. The model assumes weak scattering from bone, where scattering is assumed to arise from the elastic solid trabeculae. The fluctuations of acoustical properties between bone tissue and the saturating fluid are assumed to be random and are described by the 3-D spatial autocorrelation function of the medium. In this paper, a Gaussian autocorrelation function is used. The inversion procedure is applied to a set of data measured on 33 femoral bone specimens. Results show that the model can predict both the magnitude and the frequency-dependence of the backscatter coefficient (root mean square error RMSE = 1 dB). The estimated trabecular thickness values are compared to the true trabecular thickness measured on high resolution microcomputed tomography 3-D reconstruction of bones microarchitecture. A close agreement is obtained on average over the group of specimens between predictions and the reference values: true Tb.Th is 132 +/- 12 microm and estimated Tb.Th is 134 +/- 15 microm. However, a moderate correlation between actual and estimated Tb.Th values is found (R2 = 0.44, p<10(-4), RMSE = 8.7 microm) suggesting a modest predictability at the individual level. Sources for the variability of the estimator are studied. Using synthetic rf signals, we demonstrate that the fundamental limitation of the estimator due to speckle noise is approximately 5 microm. Taking into account the measurement errors, the total uncertainty on Tb.Th estimates is of the order of 7 microm. The influence of the attenuation compensation function used to derive the backscatter coefficient is studied. In particular, we demonstrate the necessity of compensating for the effect of the gating time window. The results are discussed with respect to their meaningful clinical value. The requirements to be fulfilled by the performance of the technique change with regard to the question being posed. Two different strategies are examined: 1. characterize trabecular thickness without consideration of bone quantity (or bone mineral density) and 2. estimate trabecular thickness after adjustment for BMD. Considering the first strategy, a comparison between the precision of our estimator and the biological variability leads us to the conclusion that our estimator should only permit to distinguish between micro-architectures characterized by extreme values of trabecular thickness (i.e., very thin or very thick trabecular thickness). In this respect, it would be interesting to test whether the estimator is able to discriminate between rod-like (thin) and plate-like (thick) structures that are known to influence differently bone strength. The second strategy is more demanding in terms of technique performance and our estimator is not able yet to catch small differences in Tb.Th values expected after adjustment to bone density. Progress in the field will require a significant reduction in speckle noise and measurement errors and/or the development of other and more efficient microstructural estimators.

Prediction of frequency-dependent ultrasonic backscatter in cancellous bone using statistical weak scattering model.

The goal of this study was to propose a model for the ultrasonic frequency-dependent backscatter coefficient in cancellous bone. This model allows us to address the inverse problem and to predict the mean trabecular thickness. A weak scattering model is used and the backscatter coefficient is expressed in terms of an autocorrelation function of the medium. Different autocorrelation functions (Gaussian, exponential and densely populated media) were used to compute the backscatter coefficient and comparison is made with experimental data for 19 specimens and for frequency ranging from 0.4 to 1.2 MHz. For each specimen, a nonlinear regression was performed and the mean trabecular thickness is estimated. Experimental data and theoretical predictions were averaged over the 19 specimens. A good agreement between experimental data and predictions was found for both the magnitude and the frequency-dependence of the backscatter coefficient. We also found a good agreement between the experimental mean trabecular thickness (Tb. Th = 130 +/- 6.5 micro m) derived from the analysis of bone 3-D microarchitecture using high-resolution microtomography and theoretical predictions (d(Gauss) = 140 +/- 10 micro m, d(exponential) = 153 +/- 12.5 micro m and d(dense) = 138 +/- 6.5 micro m). These results open interesting prospects for the estimation of the mean trabecular thickness from in vivo measurements.