Efficacy of root-end filling techniques using premixed putty type bioceramic cements: an ex vivo study.

OBJECTIVES: Currently, premixed putty-type bioceramic cements (PPBCs) have become popular materials for root-end fillings. This study investigated three root-end filling techniques using PPBCs and calcium silicate-based sealers including EDTA pretreatment. MATERIALS AND METHODS: Ninety root segments were prepared and standardized with an artificial fin and lateral canal, and assigned to three groups (n = 30). Root-end fillings were placed using BC-RRM Putty alone (Group PA), injection of BC sealer followed by BC-RRM Putty (Lid Technique: Group LT) or BC-RRM Putty with BC sealer coating (Deep putty packing technique: Group DP). Half of each group was pretreated with 17% EDTA. The radiographic images of the specimens were assessed by five graders and push-out bond strength tests were conducted. The data were analyzed with a general linear model including two-way ANOVA and chi-square test at a significance level of 5%. RESULTS: DP approach demonstrated significantly higher bond strength than LT (P < 0.05). However, there was no statistically significant difference in bond strength between PA and either DP or LT. EDTA pretreatment had no significant effect on push-out bond strength. Radiographically, for the main canal, PA and DP scored significantly higher than LT. In the fin, PA scored significantly higher than others (P < 0.05). CONCLUSION: Our study highlights variations in root-end filling techniques. Injecting a bulk of bioceramic sealer before the placement of PPBCs may reduce bond strength and radiopacity. The application of PPBCs alone or in the deep putty technique demonstrates potential for favorable outcomes. EDTA pretreatment did not enhance bond-strength. CLINICAL RELEVANCE: Careful selection and application of bioceramic materials and techniques in root-end fillings may influence the outcome of endodontic root-end surgery. When PPBCs and calcium silicate-based sealers are used together for root-end fillings, sealer followed by deep putty application may offer improved bond strength and radiographic fill compared to the lid technique.

Retreatment Strategies for Cases Containing Calcium Silicate-Based Root Canal Sealers: A Comprehensive Review.

This review explores the field of retreatment strategies for cases filled with calcium silicate-based root canal sealers. Since the introduction of calcium silicate-based materials in dentistry, calcium silicate-based root canal sealers have become popular among dentists because of their biocompatibility, bioactivity, and sealing ability. Therefore, effective retreatment strategies are indispensable. This article aims to identify the challenges associated with the removal of calcium silicate-based sealers themselves and removal of gutta-percha with the sealers during retreatment, evaluate current techniques and materials, and provide future directions for research in this field. Regarding the strategies of removal of root canal sealers, calcium silicate-based sealers are still relatively new materials for clinicians compared with traditional sealers such as epoxy- or eugenol-based sealers. First, no clinically established solvents have been reported. Second, calcium silicate-based sealers are currently utilized by clinicians in either the cold sealer-based technique or the warm vertical condensation technique. Third, the setting process of calcium silicate-based sealers generates byproducts, primarily calcium hydroxide and secondarily hydroxyapatite, that could interact with dentine. Lastly, there is a lack of clinical studies evaluating the efficacy of retreatment protocols for teeth filled with calcium silicate-based sealers. Therefore, it is important to investigate the chemo-mechanical properties of calcium silicate-based sealers themselves and their reactions to solvents and/or mechanical instruments and identify the interfacial properties of calcium silicate-based sealers with respect to dentine and gutta-percha. In addition, researchers in the clinical field need to actively gather and report data on retreatments of teeth filled with calcium silicate-based sealers.

Calcium Silicate-based Sealer Extrusion into the Mandibular Canal: 3 Different Recovery Outcomes-A Report of 3 Cases.

The use of calcium silicate-based sealers (CSSs) is increasing in dentistry as a result of their favorable properties. The inadvertent extrusion of these sealers into the mandibular canal (MC) can result in temporary or permanent neurosensory alterations. Three different recovery outcomes of CSS extrusion into the MC after endodontic treatment of mandibular molars confirmed by cone-beam computed tomographic imaging are described. In Case 1, CSS from the mesiolingual canal of tooth #31 was extruded into the MC during obturation. The patient reported paresthesia. The symptoms of paresthesia were completely resolved by 9 months. In Case 2, CSS from the mesial canals of tooth #30 was extruded into the MC during obturation. A "plasmalike spreading pattern" of the extruded sealer was observed on the radiographs. The patient reported paresthesia and dysesthesia. In addition, the patient complained of hyperalgesia with heat and mechanical allodynia. The symptoms continued to persist during follow-up. At 22 months, the patient still reported persistent paresthesia, hyperalgesia, and mechanical allodynia, affecting the ability to eat. In Case 3, CSS from the distal canal of tooth #31 was extruded into the MC during obturation. The patient did not report any paresthesia or dysesthesia. All 3 patients elected a follow-up approach and monitoring rather than surgical intervention. These cases illustrate the need for the development of guidelines for the management of iatrogenic CSS extrusion into the MC because such an occurrence may result in permanent, temporary, or no neurosensory alterations.

Comparative evaluation of intermediate solutions in prevention of brown precipitate formed from sodium hypochlorite and chlorhexidine gluconate.

OBJECTIVES: To evaluate intermediate treatments between sodium hypochlorite and chlorhexidine gluconate irrigations for the prevention of a toxic brown precipitate in root canal therapy. MATERIALS AND METHODS: Thirty-nine premolars were irrigated with 6% sodium hypochlorite and divided into either: No intermediate treatment; Dry paper points; three different irrigations with 17% ethylenediaminetetraacetic acid, deionized water, or 5% sodium thiosulfate. 2% chlorhexidine gluconate was the final irrigant in all groups. Sectioned teeth were analyzed for brown precipitate intensity and area using stereomicroscopy and components related to para-chloroaniline using Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS). RESULTS: Stereomicroscopy showed that 5% STS significantly reduced brown precipitate intensity and area as compared with no intermediate irrigation (p < .05, Chi-square, generalized linear model, and Tukey's multiple comparison tests). Utilizing ToF-SIMS, 5% sodium thiosulfate was most effective in reducing the components representing para-chloroaniline and chlorhexidine gluconate. CONCLUSION: The 5% sodium thiosulfate was most effective among other intermediate treatments, assessed by stereomicroscopy and ToF-SIMS.

Retrievability of Calcium Silicate-based Root Canal Sealers During Retreatment: An Ex Vivo Study.

INTRODUCTION: The retrievability of calcium silicate-based sealers (CSSs) during nonsurgical retreatment has been equivocal. This study compared the retrievability of 3 different CSSs using 1 of 3 different solutions or no solution. METHODS: A total of 130 extracted teeth with a straight canal were decoronated to a standardized root length. The canals were instrumented to 35/.04 and divided into 3 groups (BC: EndoSequence BC sealer; EBC: EdgeBioceramic; NEO: NeoSEALERFlo), and each group was further divided into 4 subgroups (6% sodium hypochlorite; 5% acetic acid; carbonated water; no solution). After sealer placement, each master gutta-percha cone was placed intentionally 2 mm short of the working length (WL) to ensure the apical 2 mm was filled only with sealer. After storage for 21 days at 37°C and 100% humidity, retreatment was performed until apical patency was obtained. The operator was blinded to the CSS and solution used. Data were analyzed using analysis of variance to compare apical patency rates and the mock chair-times. RESULTS: Overall success rates for apical patency in BC, EBC, and NEO were 63.64%, 69.77%, and 100%, respectively. There was significantly higher apical patency rate in NEO than BC and EBC. The chair-time for NEO was significantly shorter than BC (P < .05) and EBC sealer (P < .001). There was no significant difference in the chair-time between BC and EBC sealer groups. CONCLUSION: BC, EBC, and NEO sealers in a straight canal were consistently retrievable when no solution was used. Compared with no solution, the retrievability of BC, EBC, and NEO decreased when solutions were used.

Assessment of the cytotoxic effects and chemical composition of the insoluble precipitate formed from sodium hypochlorite and chlorhexidine gluconate.

AIM: To investigate (1) the cytotoxic potential of the brown precipitate (BP) formed with sodium hypochlorite (NaOCl) and chlorhexidine gluconate (CHX), using both a small animal model of Caenorhabditis elegans (C. elegans) and cultured human gingival fibroblasts; and (2) the chemical composition of BP using Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS). METHODOLOGY: Brown precipitate was obtained by mixing equal volumes of 6% NaOCl and 2% CHX and separating the BP from clear supernatant by centrifugation. The brown precipitate was weighed and solubilized in dimethyl sulfoxide for cytotoxicity experiments. The cytotoxic effect of BP was assessed using C. elegans larvae and primary immortalized human gingival fibroblasts-hTERT (hTERT-hNOF) cells. Various dilutions of BP (25 ng/µL-150 ng/µL), supernatant (0.15% v/v), NaOCl (1:100-1:1000 dilutions of 6% NaOCl) or CHX (1:500-1:1000 dilutions of 2% CHX) along with vehicle control (0.5% v/v ethanol and 0.15% v/v DMSO) or untreated control (growth medium) were tested on C. elegans larvae and hTERT-hNOF cells. Viability was assessed in C. elegans larvae using stereomicroscopy and in hTERT-hNOF cells using dehydrogenase-based colorimetric assay. ToF-SIMS was used to assess the chemical composition of BP in comparison with CHX and para-chloroaniline (PCA). The C. elegans and cell line data were analysed using Log-Rank test and Student's t-test, respectively (p < .05). RESULTS: BP-75 ng/µL and BP-150 ng/µL were significantly more toxic to C. elegans larvae than the untreated, vehicle, supernatant or CHX treatment groups (p < .0001). Similarly, in hTERT-hNOF cells, BP-50 ng/µL, BP-75 ng/µL and BP-150 ng/µL induced significant cytotoxicity within 2 h compared with untreated, vehicle, supernatant and CHX treatments (p < .05). ToF-SIMS analysis of BP revealed ion composition characteristic of both CHX and the carcinogen PCA. CONCLUSIONS: Brown precipitate was toxic in both C. elegans larvae and hTERT-hNOF cells. The ToF-SIMS analysis of BP revealed ions characteristic of CHX and PCA that could account for the toxicities observed in C. elegans larvae and human gingival fibroblasts. Because of the insoluble and toxic nature of BP, consecutive use of CHX and NaOCl irrigants should be avoided in root canal treatment.

Radiographic Indications of Vertucci Type V Configuration in the Distal Root of Mandibular Molars: A Case Series.

Knowledge of the prevalent root canal anatomy and potential variations is necessary before the initiation of endodontic treatment. The purpose of this study was to aid in the detection and treatment of the Vertucci type V canal configuration when present in the distal root of the mandibular molars. This case series presents 3 radiographic indications of a type V configuration in the distal roots of the mandibular molars as revealed on conventional periapical radiographs: a "ghost" apex, a fast break canal, and eccentric canal tracing. Nonsurgical endodontic treatment was performed for 5 mandibular molars with the type V distal root canal. Four cases showed posttreatment resolution of symptoms and return of normal function. One case was classified as "failed" because of persistent symptoms and clinical signs. The tooth was surgically treated and subsequently healed. These case reports show the importance of visualizing and managing the anatomic variations of the canal system in distal roots of mandibular molars and incorporating these capabilities into clinical practice to enhance the occurrence of a successful outcome. Additionally, clinical guidelines are provided that can help clinicians overcome the challenges in diagnosing and treating such complex cases.

Decrease in interpretation time for both novice and experienced readers using a concurrent computer-aided detection system for digital breast tomosynthesis.

OBJECTIVES: To compare the diagnostic performance and interpretation time of digital breast tomosynthesis (DBT) for both novice and experienced readers with and without using a computer-aided detection (CAD) system for concurrent read. METHODS: CAD system was developed for concurrent read in DBT interpretation. In this observer performance study, we used an enriched sample of 100 DBT cases including 70 with and 30 without breast cancers. Image interpretation was performed by four radiologists with different experience levels (two experienced and two novice). Each reader completed two reading sessions (at a minimum 2-month interval), once with and once without CAD. Three different rating scales were used to record each reader's interpretation. Reader performance with and without CAD was reported and compared for each radiologist. Reading time for each case was also recorded. RESULTS: Average area under the receiver operating characteristic curve values for BI-RADS scale on using CAD were 0.778 and 0.776 without using CAD, demonstrating no statistically significant differences. Results were consistent when the probability of malignancy and percentage probability of malignancy scales were used. Reading times per case were 72.07 s and 62.03 s (SD, 37.54 s vs 34.38 s) without and with CAD, respectively. The average difference in reading time on using CAD was a statistically significant decrease of 10.04 ± 1.85 s, providing 14% decrease in time. The time-reducing effect was consistently observed in both novice and experienced readers. CONCLUSION: DBT combined with CAD reduced interpretation time without diagnostic performance loss to novice and experienced readers. KEY POINTS: • The use of a concurrent DBT-CAD system shortened interpretation time. • The shortened interpretation time with DBT-CAD did not come at a cost to diagnostic performance to novice or experienced readers. • The concurrent DBT-CAD system improved the efficiency of DBT interpretation.

Fully automated nipple detection in digital breast tomosynthesis.

BACKGROUND AND OBJECTIVE: We propose a nipple detection algorithm for use with digital breast tomosynthesis (DBT) images. DBT images have been developed to overcome the weaknesses of 2D mammograms for denser breasts by providing 3D breast images. The nipple location acts as an invaluable landmark in DBT images for aligning the right and left breasts and describing the relative location of any existing lesions. METHODS: Nipples may be visible or invisible in a breast image, and therefore a nipple detection method must be able to detect the nipples for both cases. The detection method for visible nipples based on their shape is simple and highly efficient. However, it is difficult to detect invisible nipples because they do not have a prominent shape. Fibroglandular tissue in a breast is anatomically connected with the nipple. Thus, the nipple location can be detected by analyzing the location of such tissue. In this paper, we propose a method for detecting the location of both visible and invisible nipples using fibroglandular tissue and changes in the breast area. RESULTS: Our algorithm was applied to 138 DBT images, and its nipple detection accuracy was evaluated based on the mean Euclidean distance. The results indicate that our proposed method achieves a mean Euclidean distance of 3.10±2.58mm. CONCLUSIONS: The nipple location can be a very important piece of information in the process of a DBT image registration. This paper presents a method for the automatic nipple detection in a DBT image. The extracted nipple location plays an essential role in classifying any existing lesions and comparing both the right and left breasts. Thus, the proposed method can help with computer-aided detection for a more efficient DBT image analysis.

Dentinal Tubule Penetration of a Calcium Silicate-based Root Canal Sealer with Different Obturation Methods.

INTRODUCTION: The purpose of this study was to investigate the depths of penetration of a calcium silicate-based sealer in dentinal tubules by using 3 different obturation methods. METHODS: One hundred extracted human permanent anterior teeth were endodontically prepared and divided equally into 3 experimental groups and 1 control group as follows: CPoint single cone (CPSC), gutta-percha single cone (GPSC), gutta-percha vertical condensation (GPVC), all with a calcium silicate-based sealer and calcium indicator Fluo-3, and CPoint single cone with a calcium indicator Fluo-3 (CPF3) without sealer as the control. The roots of the teeth in each group were axially cross-sectioned, and the surfaces were examined under confocal laser scanning microscopy at ×10 and ×20 magnifications. The sealer penetration depths were measured at their maximum depths and at 4 circumferential depths (12, 3, 6, and 9 o'clock) by using fluorescence. RESULTS: Statistical analyses by using one-way analysis of variance and repeated measures analysis with linear mixed models showed no statistically significant difference among the mean maximum depth measurements (CPSC, 283.83 µm; GPSC, 318.66 µm; and GPVC, 313.03 µm; P = .7553) and among the average depths across all points (CPSC, 111.24 µm; GPSC, 135.38 µm; and GPVC, 126.62 µm; P = .5304) for the 3 experimental groups. CONCLUSIONS: The pressure derived from hygroscopic expansion of CPoint or warm vertical condensation did not enhance penetration depths of the calcium silicate-based sealer. Sealer penetration into the dentinal tubules occurred independent of the obturation technique.

Automated Detection Algorithm of Breast Masses in Three-Dimensional Ultrasound Images.

OBJECTIVES: We propose an automatic breast mass detection algorithm in three-dimensional (3D) ultrasound (US) images using the Hough transform technique. METHODS: One hundred twenty-five cropped images containing 68 benign and 60 malignant masses are acquired with clinical diagnosis by an experienced radiologist. The 3D US images are masked, subsampled, contrast-adjusted, and median-filtered as preprocessing steps before the Hough transform is used. Thereafter, we perform 3D Hough transform to detect spherical hyperplanes in 3D US breast image volumes, generate Hough spheres, and sort them in the order of votes. In order to reduce the number of the false positives in the breast mass detection algorithm, the Hough sphere with a mean or grey level value of the centroid higher than the mean of the 3D US image is excluded, and the remaining Hough sphere is converted into a circumscribing parallelepiped cube as breast mass lesion candidates. Finally, we examine whether or not the generated Hough cubes were overlapping each other geometrically, and the resulting Hough cubes are suggested as detected breast mass candidates. RESULTS: An automatic breast mass detection algorithm is applied with mass detection sensitivity of 96.1% at 0.84 false positives per case, quite comparable to the results in previous research, and we note that in the case of malignant breast mass detection, every malignant mass is detected with false positives per case at a rate of 0.62. CONCLUSIONS: The breast mass detection efficiency of our algorithm is assessed by performing a ROC analysis.

Three-Dimensional Computer-Aided Detection of Microcalcification Clusters in Digital Breast Tomosynthesis.

We propose computer-aided detection (CADe) algorithm for microcalcification (MC) clusters in reconstructed digital breast tomosynthesis (DBT) images. The algorithm consists of prescreening, MC detection, clustering, and false-positive (FP) reduction steps. The DBT images containing the MC-like objects were enhanced by a multiscale Hessian-based three-dimensional (3D) objectness response function and a connected-component segmentation method was applied to extract the cluster seed objects as potential clustering centers of MCs. Secondly, a signal-to-noise ratio (SNR) enhanced image was also generated to detect the individual MC candidates and prescreen the MC-like objects. Each cluster seed candidate was prescreened by counting neighboring individual MC candidates nearby the cluster seed object according to several microcalcification clustering criteria. As a second step, we introduced bounding boxes for the accepted seed candidate, clustered all the overlapping cubes, and examined. After the FP reduction step, the average number of FPs per case was estimated to be 2.47 per DBT volume with a sensitivity of 83.3%.

A preliminary study of the effect of electrode placement in order to define a suitable location for two electrodes and obtain sufficiently reliable ECG signals when monitoring with wireless system.

Most countries face high and increasing rates of cardiovascular disease. Each year, heart disease kills more Americans than cancer. Therefore, there has been a promising market for portable ECG equipment and it is increasing. To use portable ECG measuring devices, it is essential to define a suitable location for the measuring as we need to reduced electrode size and distance. This research proposes to study how the inter-electrode distance affects the signal and how the electrode pair should be placed on the chest in order to obtain a sufficiently reliable ECG signal to detect heart arrhythmias in any environment, such as home or work. Therefore, we developed a compact, portable patch type ambulatory ECG monitoring system, Heart Tracker, using a microprocessor for preliminary study of signal analysis. To optimize the electrode arrangement in wireless environment, we compared HT and standard 12 lead with changing electrode position.

Sequential algorithm for the detection of the shockable rhythms in electrocardiogram.

We suggest a sequential algorithm for the detection of the ventricular fibrillation (VF) and ventricular tachycardia (VT) of a rate above 180 bpm, so called shockable rhythms. The built-in algorithm for ECG analysis embedded in the portable bio-signal sensing module is aimed to discriminate between shockable and non-shockable rhythms and its accuracy is analyzed. An algorithm for VF/VT detection is proposed to analyze every 1 s ECG episode using the past 8 s episodes. The method is tested with 844,587 ECG episodes from the widely accepted databases. A sensitivity of 86.8 % and a specificity of 99.4 % were obtained and compared with the previous results.

A preliminary study on discrimination of osteoporotic fractured group from nonfractured group using support vector machine.

Osteoporosis is characterized by an abnormal loss of bone mineral content, which leads to a tendency to non-traumatic bone fractures or to structural deformations of bone. Thus, bone density has been considered as a most reliable parameter to assess osteoporotic fracture risk. In past decades, by the way, bone texture measures have been studied to estimate other aspect of bone quality. Some studies have been performed on CT or MR images to assess bone quality using trabecular structure analysis. Other studies have been performed on plain x-ray images or ultrasound images to assess trabecular structure. However, most of the studies are focused on individual parameters to distinguish between osteoporotic fractured group and nonfractured group. In this preliminary study, we combine various texture parameters with bone density parameters using a support vector machine and point out the most promising combination of parameters to distinguish between osteoporotic fractured group and nonfractured group.

Bone mineral density estimation using the filling factor of the radius X-ray image.

Osteoporosis is characterized by an abnormal loss of bone mineral content, which leads to a tendency to non-traumatic bone fractures or to structural deformations of bone. Thus, bone density measurement has been considered as a most reliable method to assess bone fracture risk due to osteoporosis. In past decades, x-ray images have been studied in connection with the bone mineral density estimation. However, the estimated bone mineral density from the x-ray image can undergo a relatively large accuracy or precision error. The most relevant origin of the accuracy or precision error may be unstable x-ray image acquisition condition. In the previous study, we presented a bone mineral density estimation method that uses the trabecular bone filling factor in the radius x-ray image and that is relatively insensitive to the x-ray image acquisition condition. In this paper, we investigate the method using larger patient data and point out a preliminary result related to the fracture risk prediction using the method.

The echotextural characteristics for the diagnosis of the liver cirrhosis using the sonographic images.

Various statistical parameters have been tried for the computer-aided diagnosis of the liver fibrosis. The region of interest (ROI) for the liver and spleen parenchymas have been chosen, and the hepatolienal textural contrast for each ultrasound (US) image has been examined. The selectively chosen textural parameters are linearly combined with the pre-determined coefficients to give the computer-aided diagnostic parameter for the liver fibrosis, whose final stage is named as cirrhosis. From the comparison with the clinical diagnosis it is suggested that the proposed calculation scheme using the textural parameters show the quite promising classification performance for the computer-aided diagnosis of the liver cirrhosis.

Quantitative analysis of white matter on DTI images of patients with tinnitus: preliminary report.

Tinnitus is defined as an unwanted auditory perception of internal origin, usually localized, and rarely heard by others. Persisting appearances of tinnitus are most commonly combined with diseases or damage in the inner ear or neuro-auditory pathway. Diffusion tensor magnetic resonance imaging (DTI) is a new imaging method with the capability of providing non-invasive information on tissue microstructure not available in routine clinical MRI images. Since white matter regions of the brain are an ordered structure due to the myelination and directionality of axons and have a high degree of anisotropy, the ability to detect changes in anisotropy can be extremely useful in the study of diseases such as tinnitus and multiple sclerosis, which are assumed to involve the demyelination of axons. While several studies investigated tinnitus using MRI, few studies tried to analyze neurological disorders quantitatively using DTI. In this study, the cerebral volume of white matter on DTI images of patients with tinnitus was measured using the semi-automated and intuitive menu based image processing tool (Human Analyzer, ETRI, Korea). Total number of ten patients with tinnitus including three women was examined.

The GGO lesions detected by computer-aided detection system on chest MDCT images.

The detection of abnormal lesions in the early stages of lung cancer is important to improve survival. Computer-aided detection (CAD) system can be useful for early detection of pulmonary nodules on computed tomography (CT) images for screening. Moreover, CAD system can be 'second opinion' when a radiologist detects the pulmonary nodules on multi-slice CT images. We developed a computer-aided detection system for pulmonary nodule detection on multi-detector row computed tomography (MDCT) images. We applied the nodule isolation technique using radial distribution function and additional algorithms. In this paper, we reported the ground-glass opacity (GGO) lesions detected by self-developed computer-aided pulmonary nodule detection system.