[Effect of Debriefing Based on the Clinical Judgment Model on Simulation Based Learning Outcomes of End-of-Life Care for Nursing Students: A Non-Randomized Controlled Trial].

PURPOSE: This study was conducted to identify effects of debriefing based on the clinical judgment model for nursing students on their knowledge, skill performance, clinical judgment, self-confidence and learner satisfaction during simulation based end-of-life care (ELC) education. METHODS: Simulation based ELC education was developed in six steps as follows: selection of learning subjects and objects, development of learning tools, a trial run of simulation-based education, students' skill training, and evaluators' training. Forty-eight senior nursing students (25 in the experimental group and 23 in the control group) participated in the simulation-based ELC education using a high-fidelity simulator. Debriefing based on the clinical judgment was compared with the usual debriefing. RESULTS: ANCOVA showed that there were differences in knowledge (F=4.81, p=.034), skill performance (F=68.33, p<.001), clinical judgment (F=18.33, p<.001) and self-confidence (F=4.85, p=.033), but no difference in satisfaction (t=-0.38, p=.704) between the experimental and control groups. CONCLUSION: This study found that debriefing based on the clinical judgement model is effective for supporting nursing students for reflecting on clinical judgment and improving their diverse competencies in complex clinical settings such as ELC.

Implants Displaced Into the Maxillary Sinus: A Systematic Review.

OBJECTIVES: Implant displacement into the maxillary sinus often results from features specific to the posterior maxillary teeth, including poor bone quality and insufficient remaining bone. This study reviews implants displaced into the maxillary sinus, the causes and complications of displacement, and how to remove them, according to when the displacement occurs. MATERIALS AND METHODS: The PubMed, Ovid (MEDLINE), and EMBASE databases were searched using the keywords "displacement," "implant," "maxillary sinus," and "removal" for articles published between January 2000 and July 2013. RESULTS: Twenty-two journal articles were selected; these discussed 49 displaced implants. Most of the implants were displaced into the maxillary sinus during implantation, but resulted in a low incidence of complications, such as maxillary sinusitis. The displaced implants were removed using the Caldwell-Luc approach or a transoral or transnasal endoscopic approach. CONCLUSION: Implants displaced into the maxillary sinus have various causes according to when they are displaced. As displaced implants can cause several complications, transnasal endoscopy is recommended to remove them; however, the implants should be examined thoroughly before selecting the removal method.

Histologic analysis of resorbable blasting media surface implants retrieved from humans: a report of two cases.

The purpose of this study is to evaluate the degree of osseointegration of resorbable blasting media (RBM) surface implants retrieved from humans. Three implants in the mandibular molar region that were surface-treated with RBM were retrieved from two patients. The implants were used to manufacture specimens in order to measure the bone-implant contact (BIC) ratio. The BIC ratios of the three implants were found to be an average of 69.0%±9.1%. In conclusion, that RBM surface implants are integrated into the host environment with histological significance and the BIC ratio of the RBM surface-treated implant was not significantly different from that of other surface-treated implants.

Comparative study on the osseointegration of implants in dog mandibles according to the implant surface treatment.

OBJECTIVES: This study compared the impact of implant surface treatment on the stability and osseointegration of implants in dog mandibles. MATERIALS AND METHODS: Six adult dogs received a total of 48 implants that were prepared using four different surface treatments; resorbable blast media (RBM), hydroxyapatite (HA), hydrothermal-treated HA, and sand blasting and acid etching (SLA). Implants were installed, and dogs were separated into 2- and 4-week groups. Implant stability was evaluated via Periotest M, Osstell Mentor, and removal torque analyzers. A histomorphometric analysis was also performed. RESULTS: The stability evaluation showed that all groups generally had satisfactory values. The histomorphometric evaluation via a light microscope revealed that the HA surface implant group had the highest ratio of new bone formation on the entire fixture. The hydrothermal-treated HA surface implant group showed a high ratio of bone-to-implant contact in the upper half of the implant area. CONCLUSION: The hydrothermal-treated HA implant improved the bone-to-implant contact ratio on the upper fixture, which increased the implant stability.

A comparative analysis of patients with mesiodenses: a clinical and radiological study.

OBJECTIVES: A mesiodens appears most commonly as a supernumerary tooth impacted in the anterior maxilla. The purpose of this study is analyze mesiodens clinically. MATERIALS AND METHODS: Gender, crown form, direction of impaction, relation to permanent incisors, and chief complaints of patients with extracted mesiodens were analyzed. RESULTS: Patients were analyzed for motivation to visit the hospital; 85.4% of the patients were referred from other hospitals. Mesiodens was more common in males than in females (3.7:1), and 70.1% of patients had only one mesiodens, while 29.6% had two mesiodenses. Of the mesiodenses, 61.4% were of the aconical form, and the most common direction was upward (62.4%), followed by the normal position (26.0%) and the horizontal position (11.6%). The mesiodenses caused orthodontic problems with the permanent incisors in 46.3% of cases. Mesiodens associated with dentigerous cyst was rarely observed in our patient group. CONCLUSION: Mesiodens is more common in males than in females and often affects the permanent incisors. Thus, careful clinical and radiological evaluations of mesiodenses are important.

Influence of bone morphogenetic protein and proportion of hydroxyapatite on new bone formation in biphasic calcium phosphate graft: two pilot studies in animal bony defect model.

PURPOSE: The purpose of these two pilot studies using animal bony defect models was to evaluate the influence of bone morphogenetic protein (BMP) and proportion of hydroxyapatite (HA)/beta-tricalcium phosphate (ß-TCP) in biphasic calcium phosphate (BCP) graft on new bone formation. METHODS: In this study, four kinds of synthetic osteoconductive bone materials known for bone growth scaffold, OSTEON™II(HA:ß-TCP 30:70), OSTEON™III (HA:ß-TCP 20:80), OSTEON™II Collagen, and OSTEON™III Collagen, were prepared as BCP graft materials. In pilot study 1, three BCP materials (OSTEON™II, OSTEON™III, and OSTEON™II Collagen) were grafted in rabbit calvarial defects after impregnating in rhBMP-2. OSTEON™II without the rhBMP-2 impregnation was included in the study as the control. The amount of new bone was examined and measured histologically at 2, 4, and 8 weeks. In pilot study 2, four BCP materials (OSTEON™II, OSTEON™III, OSTEON™II Collagen, and OSTEON™III Collagen) were grafted in beagle dog mandibular defects after soaking in the rhBMP-2. The amount of total bone and new bone were measured three-dimensionally using microCT and healing process was examined histologically at 2, 4, and 8 weeks. RESULTS: In pilot study 1, rhBMP-2 impregnated groups showed more new bone formation than the rhBMP-2 free group. In pilot study 2, increased new bone formation was observed in time-dependent manner after graft of BCP and BCP-collagen (OSTEON™II, OSTEON™III, OSTEON™II Collagen, and OSTEON™III Collagen) impregnated with rhBMP-2. Also, BCP with a higher proportion of HA (30% HA) showed more favorable result in new bone formation and space maintenance, especially at the 8 weeks. CONCLUSION: From the results of the pilot studies, rhBMP-2 played positive roles in new bone formation and BCP could become a scaffold candidate for rhBMP-2 impregnation to induce new bone formation. Moreover, BCP with a higher proportion of HA (30% HA) could be considered more appropriate for rhBMP-2 carrier.

Resorption of bone graft after maxillary sinus grafting and simultaneous implant placement.

OBJECTIVES: The purpose of this study was to evaluate the sinus bone graft resorption over 3 years after two-stage implant placement. MATERIALS AND METHODS: The subjects for this study included 30 patients whose maxillary posterior ridges were too atrophic for implants. Bone-added osteotome sinus floor elevation was used in 15 maxillary sinuses, while the bone graft by lateral approach technique was used in 25 maxillary sinuses. The height from the top of the fixture to the sinus floor was estimated immediately after implant placement and the follow-up period was over 3 years. The surgery was classified with two groups: sinus bone grafting with and without autogenous bone. All implants were placed simultaneously. RESULTS: The mean vertical bone loss was 3.15±2.95 mm. The survival rate of implants was 94.7%. CONCLUSION: The amount of bone resorption was not significantly associated with the surgical methods, the type of bone graft materials used, or sinus perforation during surgery.

The seven-year cumulative survival rate of Osstem implants.

OBJECTIVES: This study was performed to analyze the cumulative survival rate of Osstem implants (Osstem Implant Co., Ltd.) over a seven-year period. MATERIALS AND METHODS: A total of 105 patients who had 467 Osstem implants that were placed at the Section of Dentistry, Seoul National University Bundang Hospital (Seongnam, Korea) from June 2003 through December 2005 were analyzed. The life table method and a cross-tabulation analysis were performed to evaluate the cumulative survival rate. The log rank test was used to evaluate the survival curve. The influence that the prognostic factors had on the survival rate was determined with a Cox proportional hazard model based on logistic regression analysis [corrected]. RESULTS: The seven-year cumulative survival rate of Osstem implants was 95.37%. The Cox proportional hazard model revealed that the following factors had a significant influence on survival rate; increased diameter, reduced prosthetic loading period and performance of bone grafting. CONCLUSION: The osstem implants showed satisfactory results over the seven-year study period.

Displaced implants into maxillary sinus: report of cases.

Although the number of implant placement in the edentulous maxillary region is increasing, there are often some cases in which implants accidentally get displaced into maxillary sinus because of low bone quality, insufficient bone height, bone resorption after surgery, and improper treatment plan. Implants displaced into the maxillary sinus can cause some complications, including mucosal thickening and sinusitis; however, there are also many cases causing no symptoms at all. Treatment procedures for implants displaced into maxillary sinus are observation, removal of implants through intraoral approach, and removal through nasal cavity using endoscope. But treatment may vary according to the presence of sinusitis, ostium obstruction, and oroantral fistula. In this study, 4 patients with present illness of implants displaced into maxillary sinus were selected, and appropriate evaluation and treatment for these cases were studied.

Guided bone regeneration using autogenous tooth bone graft in implant therapy: case series.

Recently, techniques have been reported that involve the preparation of extracted teeth from patients used as particulated bone graft materials for bone graft purposes. For implant placement and bone graft, autogenous teeth bone graft materials were used in 15 patients, and clinically excellent results were obtained. In histological examination, favorable bony healing by osteoconduction was observed.

Survival rate of Astra Tech implants with maxillary sinus lift.

OBJECTIVES: The aim of this study was to retrospectively evaluate the clinical survival rate of Astra Tech implants in the maxillary molar region performed with sinus lift and bone graft. MATERIALS AND METHODS: Ninety-nine Astra Tech implants (Osseospeed) placed in the maxillary molar region using sinus lift from September 2009 to February 2012 were selected with a minimum follow-up period of 1 year. The height of alveolar bone, sinus approach technique, bone material and implant survival rate were evaluated. RESULTS: Of the 99 implants, the survival rate was 90.9%; 8 implants failed within 1 year after implant placement, and 1 implant failed 1 year after implant loading. All failed implants were placed with sinus lift simultaneously. The average height of alveolar bone before implant placement was 6.9 mm, while the height of alveolar bone of failed implants was 2.1 mm, on average. CONCLUSION: Astra Tech implants placed in the maxillary molar region had generally good survival rates, but the relationship between reduced pre-implant alveolar bone height and implant failure requires further attention.

Osteoradionecrosis of Jaw in Head and Neck Cancer Patient Treated with Free Iliac Bone and Umbilical Fat Pad Graft.

Osteoradionecrosis is one of the most serious complications of patients receiving radiation therapy. It is characterized by hypovascularity, hypocellularity, and hypoxia-inducing necrosis of bone and soft tissue following delayed healing. In this case, a 72-year-old man was referred to the Department of Oral and Maxillofacial Surgery complaining of trismus following extraction three months before first visit. He had a history of right tonsillectomy, radical neck dissection and radiotherapy performed due to right tonsillar cancer seven years prior. After the diagnosis of osteoradionecrosis on right mandibular body and angle, conservative antibiotic therapy was used first, but an orocutaneous fistula gradually formed, and extensive bony destruction and sequestrum were observed. Sequestrectomy, free particulated iliac bone and umbilical fat pad graft were performed via a submandibular approach under general anesthesia. Preoperative regular exams and delicate wound care led to secondary healing of the wound without vascularized free flap reconstruction.

Effect of platelet-rich plasma and platelet-rich fibrin on peri-implant bone defects in dogs.

The purpose of this study was to evaluate the effect of tooth ash and platelet-rich plasma (PRP), and platelet-rich fibrin (PRF) grafts into bone defects around implants on bone formation. Six adult dogs were used as experimental subjects. Graft materials were used to create a particulate material. Forty-eight tapered-type implants, 3.7 mm in diameter, 10 mm in length, and with surface treated with hydroxyapatite (HA) coating, were used as implant fixtures. Using a trephine bur, four bone defects were formed and implants were placed in the femurs of the adult dogs. Bone grafts were not performed in the control group. Tooth ash was grafted into the defects in group 1. In group 2, a mixture of tooth ash and PRP (1:1 ratio by volume) was grafted into the defects. In group 3, a mixture of tooth ash and PRF (ratio of 1:1) was grafted in the defect area. Animals were sacrificed after 4 or 8 weeks. Based on histopathological examination, the amount and rate of new bone formation were evaluated. Histomorphometric examination revealed that the rate of new bone formation in group 3 of the 4-week group was significantly higher than that in the control group. In addition, in the 8-week group, a significant increase in new bone formation was confirmed in group 3. In this study, a bone graft method using a mixture of tooth ash and PRF was found to increase new bone formation compared to the method using PRP. In addition, it was confirmed that this effect was more prominent in the initial stage of the bone graft.

Consideration of various bone quality evaluation methods.

PURPOSE: Bone quality at the implant site has a significant effect on the success and prognosis of implants. The purpose of this article was to evaluate several methods used in evaluating bone quality and discuss the advantages and disadvantages. METHODS: The search was made using PubMed database about quantitative computed tomography (QCT), and quantitative cone-beam computerized tomography (QCBCT), dual energy x-ray absorptiometry (DXA) scans, the resistance force against the hands of the surgeon, assessment of the effect of the torque of the drill, the initial fixed value of the implant, and fractal analysis according to the Lekholm and Zarb, and Misch classifications as the standard. RESULTS: The method for measuring the resistance force and torque during implant placement and the method used to determine the implant's initial implant fixed value were easy and simple. QCBCT was reported to involve less radiation and to be more objective than QCT. DXA and fractal analysis have limits when used to classify bone quality as type II or type III. CONCLUSION: Among the methods used to evaluate bone quality in implants, a method using computed tomography, measured in Hounsfield units, was found to be the most predictive.

Clinical study of graft materials using autogenous teeth in maxillary sinus augmentation.

PURPOSE: The purpose of this study was to evaluate the effectiveness of autogenous tooth bone graft materials. MATERIALS AND METHODS: Hundred implants in 51 patients were selected, and the patients received maxillary sinus augmentation and implant placement using autogenous tooth graft materials at the Chosun University Dental Hospital and Seoul National University Bundang Hospital between July 2009 and November 2010. RESULTS: In cases using autogenous tooth bone graft alone, or together with other graft material, the implant survival rate was 96.15%. On histomorphologic examination, autogenous tooth bone graft materials showed gradual resorption and new bone formation through osteoconduction and osteoinduction. CONCLUSIONS: The results indicated that autogenous tooth bone graft materials are appropriate for use in maxillary sinus augmentation.