Hydrogen Uptake on Coordinatively Unsaturated Metal Sites in VSB-5: Strong Binding Affinity Leading to High-Temperature D2/H2 Selectivity.

We examine the adsorption of hydrogen and deuterium into the nanoporous nickel phosphate, VSB-5. On the basis of gas sorption analysis, VSB-5 exhibits one of the highest measured H2 heats of adsorption (HOA) for hydrogen (16 kJ/mol) yet reported. This high HOA is consistent with an unusually large red shift in the Q(1) and Q(0) hydrogen vibrational modes as measured with in situ infrared spectroscopy. The HOA for D2 is measured to be 2 kJ/mol higher than that for H2. "Ideal adsorbed solution theory" analysis of H2 and D2 isotherms provides selectivities above 4 for deuterium at 140 K, suggesting that VSB-5 is a promising adsorbent for pressure-swing adsorption-type separations of hydrogen isotopes.

Crystal structure of 2,3-di-methyl-maleic anhydride: continuous chains of electrostatic attraction.

In the crystal structure of 2,3-di-methyl-maleic anhydride, C6H6O3, the closest non-bonding inter-molecular distances, between the carbonyl C and O atoms of neighboring mol-ecules, were measured as 2.9054 (11) and 3.0509 (11) Å, which are well below the sum of the van der Waals radii for these atoms. These close contacts, as well as packing motifs similar to that of the title compound, were also found in the crystal structure of maleic anhydride itself and other 2,3-disubstituted maleic anhydrides. Computational modeling suggests that this close contact is caused by strong electrostatic inter-actions between the carbonyl C and O atoms.

High surface area and Z' in a thermally stable 8-fold polycatenated hydrogen-bonded framework.

1,3,5-Tris(4-carboxyphenyl)benzene assembles into an intricate 8-fold polycatenated assembly of (6,3) hexagonal nets formed through hydrogen bonds and π-stacking. One polymorph features 56 independent molecules in the asymmetric unit, the largest Z' reported to date. The framework is permanently porous, with a BET surface area of 1095 m(2) g(-1) and readily adsorbs N2, H2 and CO2.

Highly selective quantum sieving of D2 from H2 by a metal-organic framework as determined by gas manometry and infrared spectroscopy.

The quantum sieving effect between D2 and H2 is examined for a series of metal-organic frameworks (MOFs) over the temperature range 77-150 K. Isothermal adsorption measurements demonstrate a consistently larger isosteric heat of adsorption for D2 vs H2, with the largest difference being 1.4 kJ/mol in the case of Ni-MOF-74. This leads to a low-pressure selectivity for this material that increases from 1.5 at 150 K to 5.0 at 77 K. Idealized adsorption solution theory indicates that the selectivity decreases with increasing pressure, but remains well above unity at ambient pressure. Infrared measurements on different MOF materials show a strong correlation between selectivity and the frequency of the adsorbed H2 translational band. This confirms that the separation is predominantly due to the difference in the zero-point energies of the adsorbed isotopologues.

Metal-specific interactions of H2 adsorbed within isostructural metal-organic frameworks.

Diffuse reflectance infrared (IR) spectroscopy performed over a wide temperature range (35-298 K) is used to study the dynamics of H(2) adsorbed within the isostructural metal-organic frameworks M(2)L (M = Mg, Mn, Co, Ni and Zn; L = 2,5-dioxidobenzene-1,4-dicarboxylate) referred to as MOF-74 and CPO-27. Spectra collected at H(2) concentrations ranging from 0.1 to 3.0 H(2) per metal cation reveal that strongly red-shifted vibrational modes arise from isolated H(2) bound to the available metal coordination site. The red shift of the bands associated with this site correlate with reported isosteric enthalpies of adsorption (at small surface coverage), which in turn depend on the identity of M. In contrast, the bands assigned to H(2) adsorbed at positions >3 Å from the metal site exhibit only minor differences among the five materials. Our results are consistent with previous models based on neutron diffraction data and independent IR studies, but they do not support a recently proposed adsorption mechanism that invokes strong H(2)···H(2) interactions (Nijem et al. J. Am. Chem. Soc.2010, 132, 14834-14848). Room temperature IR spectra comparable to those on which the recently proposed adsorption mechanism was based were only reproduced after contaminating the adsorbent with ambient air. Our interpretation that the uncontaminated spectral features result from stepwise adsorption at discrete framework sites is reinforced by systematic red shifts of adsorbed H(2) isotopologues and consistencies among overtone bands that are well-described by the Buckingham model of molecular interactions in vibrational spectroscopy.

Determination of the hydrogen absorption sites in Zn4O(1,4-benzenedicarboxylate) by single crystal neutron diffraction.

A variable temperature (5-300 K) single crystal Laue neutron diffraction study has been conducted, and the gas absorption sites within hydrogen-loaded Zn(4)O(1,4-benzenedicarboxylate) have been located.

Effects of functionalization, catenation, and variation of the metal oxide and organic linking units on the low-pressure hydrogen adsorption properties of metal-organic frameworks.

The dihydrogen adsorption isotherms of eight metal-organic frameworks (MOFs), measured at 77 K up to a pressure of 1 atm, have been examined for correlations with their structural features. All materials display approximately Type I isotherms with no hysteresis, and saturation was not reached for any of the materials under these conditions. Among the six isoreticular MOFs (IRMOFs) studied, the catenated materials exhibit the largest capacities on a molar basis, up to 9.8 H(2) per formula unit. The addition of functional groups (-Br, -NH(2), -C(2)H(4)-) to the phenylene links of IRMOF-1 (MOF-5), or their replacement with thieno[3,2-b]thiophene moieties in IRMOF-20, altered the adsorption behavior by a minor amount despite large variations in the pore volumes of the resulting materials. In contrast, replacement of the metal oxide units with those containing coordinatively unsaturated metal sites resulted in greater H(2) uptake. The enhanced affinities of these materials, MOF-74 and HKUST-1, were further demonstrated by calculation of the isosteric heats of adsorption, which were larger across much of the range of coverage examined, compared to those of representative IRMOFs. The results suggest that under low-loading conditions, the H(2) adsorption behavior of MOFs can be improved by imparting larger charge gradients on the metal oxide units and adjusting the link metrics to constrict the pore dimensions; however, a large pore volume is still a prerequisite feature.

Characterization of H2 binding sites in prototypical metal-organic frameworks by inelastic neutron scattering.

The hindered rotor transitions of H(2) adsorbed in the chemically related and prototypical porous metal-organic frameworks IRMOF-1, IRMOF-8, IRMOF-11, and MOF-177 were studied by inelastic neutron scattering to gain information on the specifics of H(2) binding in this class of adsorbents. Remarkably sharp and complex spectra of these materials signify a diversity of well-defined binding sites. Similarities in the spectral features as a function of H(2) loading and correlations with recent crystallographic studies were used to assign transitions ranging in rotational barrier from <0.04 to 0.6 kcal/mol as corresponding to localized adsorption sites on the organic and inorganic components of these frameworks. We find that binding of H(2) at the inorganic cluster sites is affected by the nature of the organic link and is strongest in IRMOF-11 in accord with our adsorption isotherm data. The sites on the organic link have lower binding energies, but a much greater capacity for increases in H(2) loading, which demonstrates their importance for hydrogen uptake by these materials.

Gas adsorption sites in a large-pore metal-organic framework.

The primary adsorption sites for Ar and N2 within metal-organic framework-5, a cubic structure composed of Zn4O(CO2)6 units and phenylene links defining large pores 12 and 15 angstroms in diameter, have been identified by single-crystal x-ray diffraction. Refinement of data collected between 293 and 30 kelvin revealed a total of eight symmetry-independent adsorption sites. Five of these are sites on the zinc oxide unit and the organic link; the remaining three sites form a second layer in the pores. The structural integrity and high symmetry of the framework are retained throughout, with negligible changes resulting from gas adsorption.

Strategies for hydrogen storage in metal--organic frameworks.

Increased attention is being focused on metal-organic frameworks as candidates for hydrogen storage materials. This is a result of their many favorable attributes, such as high porosity, reproducible and facile syntheses, amenability to scale-up, and chemical modification for targeting desired properties. A discussion of several strategies aimed at improving hydrogen uptake in these materials is presented. These strategies include the optimization of pore size and adsorption energy by linker modification, impregnation, catenation, and the inclusion of open metal sites and lighter metals.

Hydrogen sorption in functionalized metal-organic frameworks.

Five porous metal-organic frameworks based on linking zinc oxide clusters with benzene-1,4-dicarboxylate, naphthalene-2,6-dicarboxylate, 4,5,9,10-tetrahydropyrene-2,7-dicarboxylate, 2,3,5,6-tetramethylbenzene-1,4-dicarboxylate, or benzene-1,3,5-tris(4-benzoate) were synthesized in gram-scale quantities to measure their hydrogen uptake properties. Hydrogen adsorption isotherms measured at 77 K show a distinct dependence of uptake on the nature of the link. At 1 atm, the materials sorb between 4.2 and 9.3 molecules of H2 per formula unit. The results imply a trend in hydrogen uptake with the number of rings in the organic moiety.

Structure and ion exchange properties of a new cobalt borate with a tunnel structure "templated" by Na+.

The new anhydrous borate Na2Co2B12O21 has been synthesized by flux methods and studied by single-crystal X-ray diffraction (space group I2/a with a = 17.1447(15) A, b = 4.5530(5) A, c = 19.4408(15) A, beta = 103.212(5) degrees , V = 1477.4(2) A3, Z = 4). Refinement of its structure reveals it is the first metaborate exhibiting a tunnel network, with internal dimensions of 4.5 x 8.8 A2. Further single-crystal diffraction studies show that the Na+ ions within the tunnels are exchangeable with Li+ along with the absorption of water molecules to form Li2(H2O)2Co2B12O21, making this compound a unique non-siliceous zeotype.

Assessing the impact of Cry1Ab-expressing corn pollen on monarch butterfly larvae in field studies.

Survival and growth of monarch larvae, Danaus plexippus (L.), after exposure to either Cry1Ab-expressing pollen from three Bacillus thuringiensis (Bt) corn (Zea mays L.) events differing in toxin expression or to the insecticide, lambda-cyhalothrin, were examined in field studies. First instars exposed to low doses ( approximately 22 grains per cm(2)) of event-176 pollen gained 18% less weight than those exposed to Bt11 or Mon810 pollen after a 5-day exposure period. Larvae exposed to 67 pollen grains per cm(2) on milkweed leaves from within an event-176 field exhibited 60% lower survivorship and 42% less weight gain compared with those exposed to leaves from outside the field. In contrast, Bt11 pollen had no effect on growth to adulthood or survival of first or third instars exposed for 5 days to approximately 55 and 97 pollen grains per cm(2), respectively. Similarly, no differences in larval survivorship were observed after a 4-day exposure period to leaves with 504-586 (within fields) or 18-22 (outside the field) pollen grains per cm(2) collected from Bt11 and non-Bt sweet-corn fields. However, survivorship and weight gain were drastically reduced in non-Bt fields treated with lambda-cyhalothrin. The effects of Bt11 and Mon810 pollen on the survivorship of larvae feeding 14 to 22 days on milkweeds in fields were negligible. Further studies should examine the lifetime and reproductive impact of Bt11 and Mon810 pollen on monarchs after long-term exposure to naturally deposited pollen.