Role of Ce in Yb/Al laser fibers: prevention of photodarkening and thermal effects.

We report on detailed investigations of ytterbium (Yb) and aluminum (Al) doped silica fiber and preform samples co-doped with cerium (Ce). The prevention of pump-induced photodarkening (PD) by temporary oxidation of Ce3+ to Ce4+ (or rather Ce3++) was proved by observed modifications in the ultraviolet (UV) spectra of transient absorption during near-infrared (NIR) pumping of thin preform slices. Only a small part of available Ce3+ ions (< 4%) was found to be involved in this process despite Yb inversions of up to 0.28. The modifications in the UV absorption spectra disappeared completely when the pump power was switched-off. From these observations we conclude that the recombination to Ce3+ takes place very fast thereby enabling these ions to capture liberated holes h+ perpetually during further pumping. We found a concentration ratio of Ce/Yb ≈0.5 to be sufficient to reduce PD loss to 10% in comparison to Ce-free fibers. Thus, the thermal load caused by absorption of PD color centers at pump (and laser) wavelength is expected to be also reduced. Unfortunately, new heat sources arise with the presence of Ce which cannot be explained by the absorption of Ce ions at the pump wavelength but must be attributed to the interaction with excited Yb ions. Fiber temperature increase of more than 200 K was observed if both, Yb2O3 and Ce2O3 concentration exceed 0.4 mol%.

Advanced attenuation and fluorescence measurement methods in the investigation of photodarkening and related properties of ytterbium-doped fibers.

Considering the continuous development of ytterbium (Yb)-doped fibers for fiber lasers and amplifiers, thorough characterization of the features and quality of such fibers is necessary now more than ever. In particular, the evaluation of the very strong core attenuation that results from Yb absorption and the losses accompanying photodarkening (PD) processes in Yb-doped optical fibers is still of immense interest. Keeping that in mind, the potential of a method using pinhole fibers will be demonstrated here. Moreover, the investigation of fluorescence properties of Yb3+ is also important; it can be affected by phenomena such as reabsorption, inhomogeneous pump intensity distribution, amplified spontaneous emission, lasing, and, lastly, PD. As these phenomena occur while measuring the fluorescence properties of Yb3+ in optical fibers, they can distort the fluorescence spectra and fluorescence decay significantly. We suggest a twice-perpendicular measurement method and strict time management to avoid these interfering phenomena during the fluorescence measurements.

Evidence of Tm impact in low-photodarkening Yb-doped fibers.

In contrast to Yb/Al-doped fibers, the influence of very low Tm(2)O(3) concentrations (≥ 0.1 mol-ppm) on photodarkening (PD) is clearly detectable in Yb/P-doped fibers that are known to show little degradation effects. For Tm(2)O(3) additions of more than 50 mol-ppm, the measured PD loss is even similar to Yb/Al-doped fibers with comparable rare earth concentrations. Our work reveals the risk of color center generation by pumping at wavelengths of 915 nm or 976 nm even in Al-free Yb-doped fibers and emphasizes the importance of high purity of raw materials for the preparation of Yb laser fibers with expected very low PD.

In situ FBG inscription during fiber laser operation.

We demonstrate the inscription of a 266 nm UV femtosecond pulse-induced fiber Bragg grating (FBG) in an Yb-doped fiber during optical pumping at 976 nm and the initiation of lasing with increasing grating reflectivity. Output spectra show the emission of the pumped fiber changing from the broad-ranged amplified spontaneous emission in the nonlasing case to the narrow-range laser operation due to the enhancement of FBG reflectivity during inscription. The proposed technique enables the direct characterization and control of FBG performance in fiber lasers. After FBG fabrication, we investigate the spectral characteristics of the fiber laser for different laser powers and study the influence of a thermal treatment of the FBG.

Photodarkening kinetics as a function of Yb concentration and the role of Al codoping.

We investigated the photodarkening (PD) kinetics of two fiber series with variation of the Yb content for constant Al concentration or constant ratio of Al/Yb, respectively. The results show the outstanding importance of the absolute value of Al concentration also in the case of fibers with strongly reduced Yb content. An Al/Yb ratio of 5 to 6 is not sufficient to mitigate PD loss. Moreover, a model to describe PD loss and rate constant as functions of Yb concentration and excitation is suggested that links measurements of PD in single fibers of the same type (variation of Yb inversion) and in fiber series (constant Yb inversion).

Influence of Tm- or Er-codoping on the photodarkening kinetics in Yb fibers.

We investigated photodarkening (PD) parameters of Yb/Al-doped silica fibers as a function of the concentration of additional rare earth ions like Tm or Er. It was found that both Tm and Er cause a decrease in Yb inversion followed by a reduction of PD in the case of Er, whereas Tm-codoping with more than 10 mol-ppm can strongly accelerate the process and also increase the PD loss. However, contrary to [1], we conclude that the typical PD behavior of Yb/Al fibers is an intrinsic feature of this fiber type and not caused by trace impurities of Tm (< 1 mol-ppm) unintentionally incorporated by the raw materials during fiber preparation.

Analysis of the multifilament core fiber using the effective index theory.

Multifilament core (MFC) fibers are a new type of microstructured fiber recently introduced. We investigate their properties using finite element modeling and show that the equivalent step index fiber based on moments theory does not provide similar properties. We propose an effective index theory based on the fundamental space filling mode which allows to predict the MFC properties using a semi-analytical modeling. Good resistance to bending is thus attributed to increased core effective index due to the high index filaments.

Non-isothermal bleaching of photodarkened Yb-doped fibers.

We report on the thermal treatment of photodarkened Yb-doped fiber samples. The method of non-isothermal bleaching at different temperature ramp rates can be used to determine the thermal energy distribution of photodarkening induced color centers. A distributed activation energy with a mean value of about 1.3 eV and a FWHM of 0.5 eV was found. Spectral changes during thermal treatment were observed and could be interpreted, e.g. as an enhancement of the absorption cross section.

Power-law dependence of the photodarkening rate constant on the inversion in Yb doped fibers.

The description of the photodarkening (PD) kinetics of Yb-doped silica fibers with a stretched exponential function is analyzed in more detail, revealing a dependence of the determined PD parameter values on the measurement time. Thereby, serious uncertainties may occur in advanced interpretations of the results, e.g., the discussion of the rate constant as a function of the Yb inversion, if the measurement time is too short. A method to circumvent the problems of the fitting procedure is suggested, taking advantage of the self-similarity of the PD curves for different inversions. An exponent of 4.3 +/- 0.5 in the power-law dependence of the PD rate constant tau(-1) on the Yb inversion was found for a typical aluminium-codoped fiber.

Efficient Yb laser fibers with low photodarkening by optimization of the core composition.

We report on photodarkening (PD) investigations at Yb doped fibers with specific variation of the concentrations of the codopants aluminum and phosphorus, measured during cladding pumping at 915 nm. A core composition with equal content of Al and P is most promising to achieve Yb fibers with low PD, high laser efficiency and low numerical aperture of the laser core despite of high codoping. A laser output power of more than 100 W was demonstrated on such a fiber with a slope efficiency of 72%. The correlation of the PD loss with the NIR-excited cooperative luminescence encourages the supposition that cooperative energy transfer from excited Yb(3+) ions to the atomic defect precursors in the core glass enables the formation of color centers in the pump-induced PD process.

Photodarkening in Yb doped fibers: experimental evidence of equilibrium states depending on the pump power.

Photodarkening in Yb doped fibers was examined at 633 nm in-situ during cladding pumping at 915 nm with varying pump powers and with no indication of an onset threshold. For the first time, the partial bleaching of the photodarkening loss by the pump power itself was observed. We found the relaxation to well-defined equilibrium states of the core excess loss, depending on the Yb inversion. From the dependence of the measured rate constant on the density of excited Yb ions we conclude, that on average 3 to 4 excited Yb ions create or bleach one color center responsible for the core excess loss.