Oxygen-Resistant CO2 Reduction Enabled by Electrolysis of Liquid Feedstocks.

Electrolytic CO2 reduction fails in the presence of O2. This failure occurs because the reduction of O2 is thermodynamically favored over the reduction of CO2. Consequently, O2 must be removed from the CO2 feed prior to entering an electrolyzer, which is expensive. Here, we show that the use of liquid bicarbonate feedstocks (e.g., aqueous 3.0 M KHCO3), rather than gaseous CO2 feedstocks, enables efficient and selective CO2 reduction without additional procedures for removing O2. This effect is made possible because liquid bicarbonate solutions, which serve as a liquid CO2 carrier, deliver high concentrations of captured CO2 to the cathode, while the low solubility of O2 in aqueous media maintains a low O2 concentration at the same cathode surface. Consequently, electrolyzers fed with liquid bicarbonate feedstocks create an environment at the cathode that favors the reduction of CO2 over O2. We validate this claim by electrochemically converting CO2 into CO with reaction selectivities of 65% at 100 mA cm-2 using a 3.0 M KHCO3 solution bubbled with 100% CO2 or 100% O2. Similar experiments performed with a gaseous CO2 feedstock showed that merely 0.5% of O2 in the feedstock reduced CO selectivity by >90% after 1 h of electrolysis. Our findings demonstrate that a liquid bicarbonate feedstock enables efficient CO2 reduction without the need for expensive O2 removal steps.

Catalyst Aggregation Matters for Immobilized Molecular CO2RR Electrocatalysts.

Here, we detail how the catalytic behavior of immobilized molecular electrocatalysts for the CO2 reduction reaction (CO2RR) can be impacted by catalyst aggregation. Operando Raman spectroscopy was used to study the CO2RR mediated by a layer of cobalt phthalocyanine (CoPc) immobilized on the cathode of an electrochemical flow reactor. We demonstrate that during electrolysis, the oxidation state of CoPc in the catalyst layer is dependent upon the degree of catalyst aggregation. Our data indicate that immobilized molecular catalysts must be dispersed on conductive supports to mitigate the formation of aggregates and produce meaningful performance data. We leveraged insights from this mechanistic study to engineer an improved CO-forming immobilized molecular catalyst─cobalt octaethoxyphthalocyanine (EtO8-CoPc)─that exhibited high selectivity (FECO ≥ 95%), high partial current density (JCO ≥ 300 mA/cm2), and high durability (ΔFECO < 0.1%/h at 150 mA/cm2) in a flow cell. This work demonstrates how to accurately identify CO2RR active species of molecular catalysts using operando Raman spectroscopy and how to use this information to implement improved molecular electrocatalysts into flow cells. This work also shows that the active site of CoPc during CO2RR catalysis in a flow cell is the metal center.