Carbon-reinforced Ni3S2/Ti3C2Tx MXene composite as an anode for superior-performance lithium-ion capacitors.

Lithium ion capacitors (LICs) are a new generation of energy storage devices that combine the super energy storage capability of lithium ion batteries with the satisfactory power density of supercapacitors. The development of high-performance LICs still faces great challenges due to the unbalanced reaction kinetics at the anode and cathode. Therefore, it is an inevitable need to enhance the electron/ion transfer capability of the anode materials. In this paper, to obtain a superior-rate and high-capacity Ni3S2-based anode, highly conductive Ti3C2Tx MXene sheets were introduced to sever as the carrier of Ni3S2 nanoparticles and simultaneously an amorphous carbon layer which coats onto the surface of Ni3S2 nanoparticles was in-situ generated by the carbonization of dopamine reactant. The as-synthesized Ni3S2/Ti3C2Tx/C composite exhibits a high specific surface area (112.6 m2/g) because of the addition of Ti3C2Tx that can reduce the aggregation of Ni3S2 nanoparticles and the in-situ generated amorphous carbon layer that can suppress the growth of Ni3S2 nanoparticles. The Ni3S2/Ti3C2Tx/C anode possesses a remarkable reversible discharge specific capacity (626.0 mAh/g under 0.2 A/g current density), which increases to 1150.8 mAh/g after 400-cycle charge/discharge measurement at the same measurement condition indicating eminent cyclability, along with superior rate capability. To construct a superior-performance LIC device, a sterculiae lychnophorae derived porous carbon (SLPC) cathode with an average discharge specific capacity of 73.4 mAh/g@0.1A/g was prepared. The Ni3S2/Ti3C2Tx/C//SLPC LIC device with optimal cathode/anode mass ratio has a satisfactory energy density ranging from 32.8 to 119.1 Wh kg-1 at the corresponding power density of 8799.4 to 157.5 W kg-1, together with a prominent capacity retention (95.5 %@1 A/g after 10,000 cycles).

Preparation of Yeast Extract from Brewer's Yeast Waste and Its Potential Application as a Medium Constituent.

Yeast extract serves as a source of nutritional components essential for human dietary requirements, feed formulations, and the vital growth factors and nutrients necessary for microorganisms. However, the production cost of yeast extract using cultivated active dry yeast is relatively high. This study aims to utilize the autolysis of discarded yeast post beer brewing to produce yeast extract. The concentration, temperature, pH, and time conditions are systematically optimized. It reveals that the yield of amino nitrogen and solids in the extract was increased by 3.3% and 20.9% under the optimized conditions (1.2% wall-breaking enzyme, 1% yeast extract enzyme, and a hydrolysis time of 24 h) than that of the documented 4.03% and 69.05%. Additionally, a comparative analysis with commercially available yeast powder demonstrates that the yeast extract derived from this study adequately fulfills the nutritional requirements for microbial growth. Hence, the utilization of discarded beer yeast presents an opportunity for the valuable reclamation of waste yeast, showcasing promising potential applications.

Amorphous Co-Mo-S nanospheres fabricated via room-temperature vulcanization for asymmetric supercapacitors.

Ternary metal sulfides employed in supercapacitors exhibit better electrochemical performances than their counterpart oxides due to their superior conductivity. However, the insertion/extraction of electrolyte ions can lead to a significant volume change in electrode materials, which can result in poor cycling stability. Herein, novel amorphous Co-Mo-S nanospheres were fabricated through a facile room-temperature vulcanization method. It involves the conversion of crystalline CoMoO4 by reacting it with Na2S at room temperature. In addition to the conversion of the crystalline state into an amorphous structure with more grain boundaries, which is beneficial for the transport of electron/ion and can accommodate the volume change generated by the insertion/extraction of electrolyte ions, the production of more pores led to an increased specific surface area. The electrochemical results indicate that the as-prepared amorphous Co-Mo-S nanospheres had a specific capacitance of up to 2049.7F/g@1 A/g together with good rate capability. The amorphous Co-Mo-S nanospheres can be used as the cathode of supercapacitors and assembled with an activated carbon anode into an asymmetric supercapacitor possessing a satisfactory energy density of 47.6 Wh kg-1@1012.9 W kg-1. One of the prominent features exhibited by this asymmetric device is its remarkable cyclic stability, with a capacitance retention of 107% after 10,000 cycles.

SIRT7 silencing by miR-152-3p confers cell apoptosis and renal functional impairment induced by renal ischaemia/reperfusion injury.

PURPOSE: Acute kidney injury (AKI) induced by renal ischaemia/reperfusion (I/R) during renal transplantation has been reported to be linked to the regulation of SIRT2, one of the members of SIRTUINS family. Current work is attempted to explore the influence and mechanism of SIRT7 in renal cell apoptosis controlled by miR-152-3p during renal I/R injury. METHODS: Three databases were used to select the miRNAs regulating the expression of SIRT7. Overexpression and inhibition of miR-152-3p and Luciferase assay were employed to certify the modulation of miR-152-3p to SIRT7 in cells. RT-qPCR assay was used to measure the mRNA levels. Western blot assay was employed to determine the expression of proteins. TUNEL assay and Flow Cytometry were conducted to analyze cell apoptosis. RESULTS: SIRT7 expression decreased in tissues of AKI patients and rats underwent renal I/R, which was associated with enhanced impairment of renal function. SIRT7 downregulation was attributed to the direct inhibition by miR-152-3p due to binding and inhibiting its seed sequence in 3'-UTR of SIRT7 mRNA. Consequently, the upregulation of miR-152-3p led to an inhibition of SIRT7 expression, an increase in expression of extrinsic apoptosis molecules containing FOXO3a, Bim, and caspase3, and apoptotic renal cells; while miR-152-3p inhibition abolished these phenotypes. CONCLUSION: SIRT7 downregulation by miR-152-3p is a leading cause of renal cell apoptosis and functional impairment induced by renal I/R. Inhibition of miR-152-3p to restore SIRT7 expression can be a promising strategy against renal I/R injury.

Association of T2285C polymorphism in PARP1 gene coding region with its expression, activity and NSCLC risk along with prognosis.

Poly (ADP-ribose) polymerase-1 (PARP1), a DNA repair gene, is the crucial player in the maintenance of genome integrity. T2285C polymorphism in coding region of PARP1 has been reported to be associated with susceptibility to tumours. We explored the relationship and mechanism of T2285C polymorphism of PARP1 to its expression and activity along with risk and prognosis in non-small cell lung cancer (NSCLC). mRNA expression was measured using quantitative RT-PCR assay or collected from TCGA dataset. Protein expression was examined with immunoblotting assay. Genotypes were determined by PCR-RFLP and sequencing approaches. PARP1 activity was determined with enzyme activity assay. Regulation of SIRT7 to PARP1 was determined by overexpression and small interference experiment. Association of PARP1 T2285C polymorphism with NSCLC risk was evaluated via multiple logistic regression analysis. Comparison of treatment response and progression-free survival (PFS) of NSCLC patients among different genotypes or regimens was made by chi-square test. Results indicated that mRNA and protein expression of PARP1 dramatically increased in NSCLC tissues in comparison with paired para-carcinoma tissues (P < 0.05). TC/CC mutant genotypes were associated with markedly enhanced PARP1 mRNA level compared with TT genotype (P = 0.011). No significant difference was discovered in PARP1 protein expression among TT, TC or CC genotypes (P > 0.05). Subjects with variant allele C had higher risk of NSCLC in comparison with allele T carriers [odds ratio = 1.560; P = 0.000]. NSCLC patients carrying mutational TC or CC genotypes were correlated with unfavourable response to platinum-based chemotherapy (TT vs. TC vs. CC, P = 0.010), and shorter PFS compared with TT genotype (TT vs. TC vs. CC, P = 0.009). T2285C mutation of PARP1 resulted in the enhancement of its mRNA, but the decrease of enzyme activity in tumour cell. Overexpression of SIRT7 attenuated PARP1 expression and activity. These findings suggest the variant allele C of T2285C polymorphism of PARP1 linked to an increase of NSCLC risk, and unfavourable efficacy and prognosis of NSCLC patients with platinum-based chemotherapy, which might be associated with enhancement of its mRNA expression and the diminishment of activity. Identification of PARP1 T2285C polymorphism and mRNA expression may be the promising way for the individualised treatment of NSCLC.

Soil organic carbon pool and chemical composition under different types of land use in wetland: Implication for carbon sequestration in wetlands.

This study was conducted to understand how different wetland vegetation-land use types influenced the storage and stability of soil organic carbon (SOC) in surface soils. We determined the concentration and chemical composition of SOC in both density (including light fraction organic carbon (LFOC) and heavy fraction organic carbon (HFOC)) and particle size fractions (including <2 µm, 2-63 µm, 63-200 µm and 200-2000 µm) in four wetland land use types covered with different vegetation: lake-sedge, reed, willow and poplar wetlands. Results showed that the concentrations and stock of SOC and LFOC in willow and poplar wetlands were significantly higher than those in lake-sedge and reed. However, a higher proportion of alkyl-C and a lower proportion of O-alkyl-C were observed in lake-sedge and reed wetlands than in willow and poplar, suggesting that accumulated C in willow and poplar wetlands was less stable than that in lake-sedge and reed. For all particle-size fractions except the silt (2-63 µm), the SOC concentrations were highest in willow and lowest in reed wetland surface soils, while their alkyl-C/O-alkyl-C (A/O-A) and hydrophobic-C/hydrophilic-C ratios progressively decreased from lake-sedge and reed wetland surface soils to poplar and willow surface soils. Moreover, the ratios of A/O-A and hydrophobic-C/hydrophilic-C in surface soils generally decreased with increasing concentrations of SOC in particle-size fractions, with these stability indexes being lowest in the largest particle-size fraction. These results indicate that the wetland vegetation-land use types that could incorporate more C into finer particle-size fractions had a greater potential for sequestering more stable C in such wetland ecosystems. Different wetland vegetation-land use types resulted in significant changes in the concentration and chemical structure of SOC, which could affect soil C sequestration and dynamics, C cycling in wetland ecosystems. Although both willow and poplar forests could increase SOC stock, the stability of SOC in willow wetland was higher. Therefore, on balance (stock and stability) the land use of wetland for willow forest could be a more promising way for enhancing soil C sequestration in wetlands.

Hydrothermal Synthesis of Co-Doped NiSe2 Nanowire for High-Performance Asymmetric Supercapacitors.

Co@NiSe2 electrode materials were synthesized via a simple hydrothermal method by using nickel foam in situ as the backbone and subsequently characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and a specific surface area analyzer. Results show that the Co@NiSe2 electrode exhibits a nanowire structure and grows uniformly on the nickel foam base. These features make the electrode show a relatively high specific surface area and electrical conductivity, and thus exhibit excellent electrochemical performance. The obtained electrode has a high specific capacitance of 3167.6 F·g-1 at a current density of 1 A·g-1. To enlarge the potential window and increase the energy density, an asymmetric supercapacitor was assembled by using a Co@NiSe2 electrode and activated carbon acting as positive and negative electrodes, respectively. The prepared asymmetrical supercapacitor functions stably under the potential window of 0⁻1.6 V. The asymmetric supercapacitor can deliver a high energy density of 50.0 Wh·kg-1 at a power density of 779.0 W·kg-1. Moreover, the prepared asymmetric supercapacitor exhibits a good rate performance and cycle stability.

The Difference Se Makes: A Bio-Inspired Dppf-Supported Nickel Selenolate Complex Boosts Dihydrogen Evolution with High Oxygen Tolerance.

Inspired by the metal active sites of [NiFeSe]-hydrogenases, a dppf-supported nickel(II) selenolate complex (dppf=1,1'-bis(diphenylphosphino)ferrocene) shows high catalytic activity for electrochemical proton reduction with a remarkable enzyme-like H2 evolution turnover frequency (TOF) of 7838 s-1 under an Ar atmosphere, which markedly surpasses the activity of a dppf-supported nickel(II) thiolate analogue with a low TOF of 600 s-1 . A combined study of electrochemical experiments and DFT calculations shed light on the catalytic process, suggesting that selenium atom as a bio-inspired proton relay plays a key role in proton exchange and enhancing catalytic activity of H2 production. For the first time, this type of Ni selenolate-containing electrocatalyst displays a high degree of O2 and H2 tolerance. Our results should encourage the development of the design of highly efficient oxygen-tolerant Ni selenolate molecular catalysts.

[Pb3Cu2I10(phen)4]n: a novel organic-inorganic hybrid ferromagnetic semiconductor.

An iodoplumbate-based organic-inorganic hybrid ferromagnetic semiconductor, [Pb3Cu2I10(phen)4]n, has been solvothermally synthesized. The ferromagnetic exchange interaction is resulting from the multiple aromatic π-π stacking interactions between the adjacent phen molecules.

Silver-Sulfur Hybrid Supertetrahedral Clusters: The Hitherto Missing Members in the Metal-Chalcogenide Tetrahedral Clusters.

The synthesis of Group 11 metal chalcogenide supertetrahedral clusters (SCs) still remains a great challenge mainly due to the high tendency of metal aggregation through metallophilicity and global charge balance. Demonstrated herein are the preparation, crystallographic characterization, and optical properties of two stable silver-sulfur SCs through ligand-control; one as a discrete zero-dimensional (0D) V3,4-type cluster and the other as a one-dimensional (1D) zigzag chain extended by alternating V3,2-type clusters. The notation Vn,m (where n is the number of metal layers, and m is the number of vacant corners) is used to describe a new series of vacant-corner SCs, which can be derived from the regular Tn clusters. The existence of vacant-corner-type SCs may be ascribed to the low valence and tri-coordinated environment of silver ions. These are the first representatives of structurally determined silver-sulfur tetrahedral clusters thus far. This work enriches the coinage-metal chalcogenide tetrahedral cluster portfolio, discovers vacant-corner SCs present in silver-sulfur hybrid tetrahedral clusters, and provides effective means for further development of Group 11 coinage-metal chalcogenide SCs.

A square-planar nickel dithiolate complex as an efficient molecular catalyst for the electro- and photoreduction of protons.

A square-planar nickel(ii) dithiolate complex is an active molecular catalyst for both photoreduction of protons from water with a turnover number (>1500) and electroreduction of protons from weakly acidic solutions with remarkable turnover frequencies (5575 s-1 at -1.92 V and 1441 s-1 at -1.61 V vs. SCE). DFT calculations provide in-depth insight into the catalytic cycle of the electrochemical reaction, suggesting that the sulfur atoms play crucial roles in proton exchange and hydrogen formation.

B-cell specific Moloney leukemia virus insert site 1 and peptidyl arginine deiminase IV positively regulate carcinogenesis and progression of esophageal squamous cell carcinoma.

High expression of B-cell specific Moloney leukemia virus insert site 1 (Bmi-1) and peptidyl arginine deiminase IV (PADI4) is associated with esophageal carcinoma. However, few studies have investigated the association between the Bmi-1 and PADI4 genes. The aim of the present study was to evaluate the expression of Bmi-1 and PADI4 and identify the association between the Bmi-1 and PADI4 genes in esophageal squamous cell carcinoma (ESCC) tissues. Bmi-1 and PADI4 gene expression levels were measured using immunohistochemistry, western blotting and reverse transcription-quantitative polymerase chain reaction in ESCC tissues from 86 patients who had not received pre-operative chemoradiation. The results revealed that the Bmi-1 and PADI4 genes had increased expression in carcinoma tissues compared with pericarcinous tissue (P<0.05). Bmi-1 gene expression was revealed to be associated with differentiation degree, clinical stage and lymph node metastasis (P<0.05), but had no association with gender, age or depth of invasion (P>0.05). The expression of PADI4 was associated with clinical stage, depth of invasion and lymph node metastasis (P<0.05), but was not associated with gender, age or differentiation degree (P>0.05). In addition, there was a positive association between Bmi-1 and PADI4 gene expression in ESCC (P<0.05). These results indicated that Bmi-1 and PADI4 positively regulate carcinogenesis and progression of ESCC.

A giant infiltrating angiolipoma of the mediastinum: a case report.

BACKGROUND: Angiolipoma is a rare benign neoplasm composed of mature fatty tissue and multiple small abnormal blood vessels. Infiltrating mediastinal angiolipoma is an extremely rare tumor associated with delayed diagnosis. CASE PRESENTATION: A 42-year-old woman was presented with 3-month history of mild chest tightness. Imaging of the chest showed a large mass with fat densities in the middle superior mediastinum. A presumptive diagnosis was a tumor of liposarcoma. The patient was scheduled for a thoracotomy. After the excision, the symptoms were relieved and histological study revealed that the tumor was an angiolipoma. The patient recovered very well and was discharged 7 days after the surgery. After 7 months of follow-up the patient was clinically well and asymptomatic. CONCLUSIONS: We described a giant infiltrating mediastinal angiolipoma and its removal, and discussed the tumor characteristics and prognosis. Although extremely rare, infiltrating angiolipoma should be considered in the differential diagnosis of mediastinum lesions. The prognosis after surgical management of our patient is favorable.

[Comparison of Different Pretreatment Methods for DNA Extraction from Teeth].

OBJECTIVE: To compare the concentration of teeth DNA extracted by three different pretreatment methods and to explore a simple, economical and practical pretreatment method with high concentration of extracted DNA from teeth. METHODS: A total number of 21 molars were collected from 7 corpses. The pretreatment of 3 molars from each individual was randomly performed by tooth crumb method, ball-milling method and liquid nitrogen milling method and 50 mg tooth crumb was weight and DNA was extracted by AutoMate Express forensic DNA extraction system. Subsequently, the concentration of DNA and corresponding STR genotyping of three methods were compared. RESULTS: The DNA concentration extracted by tooth crumb method, ball-milling method and liquid nitrogen milling method was 0.055 6-1.989 1 ng/µL, 0.036 6-1.175 6 ng/µL and 0.037 8-1.249 0 ng/µL, respectively. The DNA concentration obtained by tooth crumb method was higher (P < 0.05) and the success rate of STR genotyping was high. CONCLUSION: Combined with AutoMate Express forensic DNA extraction system, tooth crumb method is an efficient and feasible method to extract DNA from teeth, which can be applied in forensic practice.

Lipoma-Like Bronchogenic Cyst in the Right Chest Sidewall: A Case Report and Literature Review.

Bronchogenic cyst most commonly occurs in the mediastinum, followed by the lung. We admitted a 59-year female patient with bronchogenic cyst being uniquely located on the right chest wall of the parietal pleura. Preoperative CT scan showed a local low-density lesion on the right chest wall. The lesion was removed by the thoracoscopic surgery. During the surgical resection, the lesion was observed to be located on the right chest wall. The lesion was surrounded by adipose tissue and covered with entire parietal pleura, which looks like lipoma. Pathological examination demonstrated that the lesion was bronchogenic cyst. In addition, previously reported cases of bronchogenic cyst were reviewed, and the relevant clinical knowledge was discussed.

Synchronous double primary cancer of the lung and nasal vestibule: A case report and literature review.

Squamous cell carcinoma (SCC) of the nasal vestibule is a rare tumor entity, and its occurrence combined with lung cancer is even rarer. Thus, several patients are often initially misdiagnosed or remain undiagnosed. This is the case report of a 55-year-old male patient who presented to our hospital with a neoplasm in the left lung. The patient was treated with left upper pulmonary lobectomy and the subsequent histopathological examination of the surgical specimen revealed a poorly differentiated SCC. On postoperative week 4, the patient presented with purulent and bloody discharge from the left nostril and was misdiagnosed with an upper jaw cyst. After another 3 weeks, the patient was re-admitted to the hospital with a mass of left nostril and nasal congestion. Tru-Cut biopsies from the nasal area and histopathological examination revealed a moderately differentiated SCC. According to the clinical presentation and the histopathological findings, the patient was diagnosed with double primary cancer of the lung and the nasal vestibule. The mass of the left nostril was significantly reduced in size with radiotherapy. To the best of our knowledge, there is no similar case previously reported in the literature. Due to the rarity of scc of the nasal vestibule concomittant with lung cancer, we herein present this case report with a review of the relevant literature and investigation of the clinical characteristics.

Application of modified attapulgite in phthalate acid ester-contaminated soil: Effects on phthalate acid ester dissipation and the composition of soil microbial community.

The effects of modified attapulgite (MA) on the dissipations of the plasticizers di-n-butyl phthalate (DBP) and di-(2-ethylhexyl) phthalate (DEHP) in soil, as well as on the composition of soil microbial community, were studied. DBP, DEHP (50 mg kg(-1) in soil, respectively), and MA (1, 5, and 10 % in soil) were mixed thoroughly with soil and incubated for 60 days. DBP- and DEHP-contaminated soils without MA were used as the controls. Both of DBP and DEHP residues in bulk soils and four soil fractions were measured at five incubation times 1, 7, 15, 30, and 60 days, and their dissipation kinetic equations were analyzed. The microbial phospholipid fatty acid (PLFA) concentrations were also measured at the end of experiment. Our results showed that the effect of modified attapulgite on DBP dissipation was related to its dosage in soil. The DEHP dissipation was both inhibited by MA at the 5 and 10 % rates in soils. The application of MA changed the content percentages but did not change the concentration order of phthalate acid esters (PAEs) in soil particle-size fractions. The total microbial PLFA content was significantly increased by 5 and 10 % MA in the contaminated soils. Meanwhile, the gram-negative (GN)/gram-positive (GP) ratios increased when MA was applied at the dosages of 5 and 10 % in DBP and 10 % in DEHP-contaminated soils. Principal component analysis (PCA) indicated that the change of bacteria PLFA, especially the GN bacterial PLFA, depended on the dosages of MA added into soil. The application of MA into soil has a positive effect on reducing the eco-toxicity of PAEs in soil based on the analysis of the soil microbial PLFA.

Comparison of Different Pretreatment Methods for DNA Extraction from Teeth / 法医学杂志

OBJECTIVE@#To compare the concentration of teeth DNA extracted by three different pretreatment methods and to explore a simple, economical and practical pretreatment method with high concentration of extracted DNA from teeth.@*METHODS@#A total number of 21 molars were collected from 7 corpses. The pretreatment of 3 molars from each individual was randomly performed by tooth crumb method, ball-milling method and liquid nitrogen milling method and 50 mg tooth crumb was weight and DNA was extracted by AutoMate Express forensic DNA extraction system. Subsequently, the concentration of DNA and corresponding STR genotyping of three methods were compared.@*RESULTS@#The DNA concentration extracted by tooth crumb method, ball-milling method and liquid nitrogen milling method was 0.055 6-1.989 1 ng/μL, 0.036 6-1.175 6 ng/μL and 0.037 8-1.249 0 ng/μL, respectively. The DNA concentration obtained by tooth crumb method was higher (P < 0.05) and the success rate of STR genotyping was high.@*CONCLUSION@#Combined with AutoMate Express forensic DNA extraction system, tooth crumb method is an efficient and feasible method to extract DNA from teeth, which can be applied in forensic practice.

Fine Tuning of Nanocrystal and Pore Sizes of TiO2 Submicrospheres toward High Performance Dye-Sensitized Solar Cells.

In general, the properties and performance of mesoporous TiO2 are greatly dependent on its crystal size, crystallinity, porosity, surface area, and morphology; in this regard, design and fine-tuning the crystal and pore sizes of the TiO2 submicrospheres and investigating the effect of these factors on the properties and photoelectric performance of dye-sensitized solar cells (DSSCs) is essential. In this work, uniform TiO2 submicrospheres were synthesized by a two-step procedure containing hydrolysis and solvothermal process. The crystal and pore sizes of the TiO2 submicrospheres were fine-tuned and controlled in a narrow range by adjusting the quantity of NH4OH during the solvothermal process. The effect of crystal and pore size of TiO2 submicrosphere on the performance of the DSSCs and their properties including dye-loading capacity, light scattering effect, power conversion efficiency (PCE), incident photon-to-electron conversion efficiencies (IPCEs), and electron recombination were compared and analyzed. The results show that increasing pore size plays a more significant role in improving the dye-loading capacity and PCE than increasing surface area, and an overall PCE value of 8.62% was obtained for the device with a 7.0 µm film thickness based on the TiO2 submicrospheres treated with 0.6 mL of NH4OH. Finally, the best TiO2 submicrosphere based photoanode film was optimized by TiCl4 treatment, and increasing film thickness and a remarkable PCE up to 11.11% were achieved.

Photocatalytic water reduction from a noble-metal-free molecular dyad based on a thienyl-expanded BODIPY photosensitizer.

A noble-metal-free molecular dyad was constructed by anchoring a thienyl-expanded BODIPY photosensitizer (PS) to a cobaloxime catalyst, which gives a 2.5-fold increase in the TON, and a 3-fold enhancement in the quantum efficiency as compared to the multicomponent catalytic system for the generation of hydrogen via the reduction of water. The stability of PS was expected to improve by introducing the thienyl moiety into the BODIPY core.