Microwave-induced hyperthermia in situ in the treatment of tumors of proximal humerus: long-term results with functionary sparing surgery.

BACKGROUND: The present study aimed to evaluate the indications, feasibility, clinical effectiveness and complications of the treatment with microwave in situ inactivation followed by curettage and bone grafting assisted with internal fixation, for the proximal humerus tumors. METHODS: The clinical data of 49 patients with primary or metastatic tumor of the proximal humerus who received intraoperative microwave inactivation in situ with curettage and bone grafting in our hospital from May 2008 to April 2021 were retrospectively analyzed. RESULTS: There were 25 males and 24 females, with an average age of 57.6 ± 19.9 years (range, 20-81). All patients were followed up for 7 to 146 months, with an average period of 69.2 ± 39.8 months. Up to the last follow-up, 14 patients died. The 5-year overall survival was 67.3%, and 5-year tumor-specific survival was 71.4%. The 5-year tumor-specific survival rates were 100% for aggressive benign tumors or low potential malignancy tumors, 70.1% for primary malignancies, and 36.9% for metastatic tumors. The average preoperative MSTS, constant-Murley and VAS scores were 16.81 ± 3.85, 62.71 ± 12.56 and 6.75 ± 2.47, which were all significantly improved at 6 weeks after operation and at the final follow-up (P < 0.05). CONCLUSIONS: Microwave inactivation in situ and curettage and bone grafting are a feasible treatment for tumors of proximal humeral, especially for malignant tumors and metastases, without the necessity of the replacement of the shoulder, with little trauma and good upper limb function, and with low local recurrence and distant metastasis.

Comparison of demineralized bone matrix with different cycling crushing times in posterolateral fusion model of athymic rats.

Decalcified bone matrix (DBM) is a widely used alternative material for bone transplantation. In the DBM production process, an effective particle size and the highest utilization rate of raw materials can be achieved only through multiple high-speed circulating comminution. The rat posterolateral lumbar fusion model (PLF) is the most mature small animal model for the initial evaluation of the efficacy of graft materials for bone regeneration and spinal fusion. To evaluate the differences in the in vivo osteogenic effects of DBM pulverization through 1, 5, 9, and 14 high-speed cycles, sixty athymic rats were divided into six groups: single cycling crushing (CC1), 5 cycles of crushing (CC5), 9 cycles of crushing (CC9), 13 cycles of crushing (CC13), autogenous bone graft (ABG) and negative control (NC). Posterolateral lumbar fusion was performed. Six weeks after surgery, the bilateral lumbar fusion of athymic rats was evaluated through manual palpation, X-ray, micro-CT and histological sections. Rank data were tested by the rank-sum test, and nonparametric data were tested by the Kruskal‒Wallis H test. The manual palpation and X-ray results showed that the fusion rate did not significantly differ between the CC1, CC5, CC9, CC13 and ABG groups. However, cavities appeared in CC9 and CC13 on the micro-CT image. The bone mass (BV/TV) of CC1, CC5, CC9 and CC13 was better than that of the ABG group, while almost no osteogenesis was observed in the NC group. Histologically, there was no obvious difference between the four groups except that the CC9 group and CC13 group had more fibrous tissues in the new bone. In conclusion, DMB with different cycling crushing times has no obvious difference in fusion rate of PLF, but it is slightly better than the ABG group.

Repair of tendons treated with peracetic acid-ethanol and gamma irradiation by EDC combined with NHS: a morphological, biochemical and biomechanical study in vitro.

The purpose of this study was to investigate whether 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) combined with n-hydroxysuccinimide (NHS) can repair tendon damage caused by peracetic acid-ethanol and gamma irradiation sterilization. The semitendinosus tendons of 15 New Zealand white rabbits were selected as experimental materials, and the tendons were sterilized in a solution containing 1% (v/w) peracetic acid and 24% (v/w) ethanol. After 15 kGy gamma irradiation sterilization, the tendons were randomly divided into three groups (n = 10). The tendons were repaired with EDCs of 0, 2.5 and 5 mM combined with 5 mM NHS for 6 h, the tendons were temporarily stored at - 80 ± °C. The arrangement and spatial structure of collagen fibers were observed by light microscopy and scanning electron microscopy, the collagen type and collagen crimp period were observed under a polarizing microscope, and the collagen fibril diameter and its distribution were measured by transmission electron microscopy, from which the collagen fibril index and mass average diameter were calculated. The resistance of collagen to enzymolysis was detected by the free hydroxyproline test, and tensile fracture and cyclic loading tests of each group of tendons were carried out, from which the elastic modulus, maximum stress, maximum strain, strain energy density and cyclic creep strain were calculated. The obtained results showed that the gap between loose collagen fibers in the 0 mM control group was wider, the parallel arrangement of tendons in the 2.5 and 5 mM groups was more uniform and regular and the fiber space decreased, the crimp period in the 5 mM group was lower than that in the 0 mM group (P < 0.05), and the concentration of hydroxyproline in the 5 mM group (711.64 ± 77.95 µg/g) was better than that in the control group (1150.57 ± 158.75 µg/g). The elastic modulus of the 5 mM group (424.73 ± 150.96 MPa) was better than that of the 0 mM group (179.09 ± 37.14 MPa). Our results show that EDC combined with NHS can repair damaged tendons after peracetic acid-ethanol and gamma radiation treatment, and 5 mM EDC has better morphological performance, anti-enzymolysis ability and biomechanical properties than 2.5 mM EDC.

Effects of demineralization mode and particle size of allogeneic bone powder on its physical and chemical properties.

At present, the commonly used allogeneic bone powder in the clinic can be divided into nondemineralized bone matrix and demineralized bone matrix (DBM). Commonly used demineralizers include acids and ethylene diamine tetraacetic acid (EDTA). There may be some diversities between them. Also, the size of the bone particle can affects its cell compatibility and osteogenic ability. We produced different particle sizes i.e., < 75, 75-100, 100-315, 315-450, 450-650, and 650-1000 µm, and treated in three ways (nondemineralized, demineralized by EDTA, and demineralized by HCl). Scanning electron microscopy showed that the surface of the samples in each group was relatively smooth without obvious differences. The results of specific surface area and porosity analysis showed that they were significantly higher in demineralized bone powder than in nondemineralized bone powder, however, there was no significant difference between the two decalcification methods. The content of hydroxyproline in nondemineralized bone powder and EDTA-demineralized bone powder had no statistical difference, while HCl-demineralization had statistical significance compared with the former two, and the content increased with the decrease of particle size. The protein and BMP-2 extracted from HCl demineralized bone powder were significantly higher than that from nondemineralized bone powder and EDTA demineralized bone powder, and there were differences among different particle sizes. These results suggested the importance of demineralization mode and particle size of the allogenic bone powder and provided guidance for the choice of the most appropriate particle size and demineralization mode to be used in tissue bioengineering.

Downregulated Long Non-Coding RNA MSC-AS1 Inhibits Osteosarcoma Progression and Increases Sensitivity to Cisplatin by Binding to MicroRNA-142.

BACKGROUND Osteosarcoma (OS) is the most prevalent malignant primary bone tumor, resulting from severe transformation of primitive mesenchymal cells, which induces osteogenesis. Long non-coding RNA (lncRNA) MSC-AS1 triggers osteogenic differentiation by sponging microRNA (miR)-140-5p. The present study assessed the mechanism of lncRNA MSC-AS1 in OS biological features and sensitivity to cisplatin (DDP) by binding to miR-142. MATERIAL AND METHODS Firstly, lncRNA MSC-AS1 expression in OS tissues and cells was analyzed. OS cells were transfected with silenced MSC-AS1 to determine its role in OS biological behaviors, and we also assessed the effect of MSC-AS1 on OS sensitivity to DDP. Then, website prediction and dual-luciferase reporter gene assay were utilized for verification of the binding site between MSC-AS1 and miR-142. Reverse transcription-quantitative polymerase chain reaction (RT-qPCR) and Western blot analysis were performed to determine the effect of MSC-AS1 on expression of miR-142, cyclin-dependent kinase 6 (CDK6), and the PI3K/AKT signaling pathway. Xenograft transplantation was also applied to confirm the in vitro experiments. RESULTS Overexpressed MSC-AS1 was associated with poor prognosis of OS patients. OS cell proliferation, invasion, and migration were reduced after silencing MSC-AS1, while cell apoptosis was enhanced. Moreover, silencing MSC-AS1 made OS cells more sensitive to DDP. Interestingly, MSC-AS1 knockdown induced miR-142 expression and reduced CDK6 levels, thereby decreasing the protein expression of p-PI3K/t-PI3K and p-AKT/t-AKT. Silencing MSC-AS1 repressed OS progression in vivo. CONCLUSIONS Our study demonstrated that silencing MSC-AS1 inhibited OS biological behaviors by enhancing miR-142 to decrease CDK6 and inactivating the PI3K/AKT axis. Our results may provide new insights for OS treatment.

Long noncoding RNA NEAT1 regulates the development of osteosarcoma through sponging miR-34a-5p to mediate HOXA13 expression as a competitive endogenous RNA.

BACKGROUND: Long noncoding RNA (lncRNA) exerts a potential regulatory role in tumorigenesis. LncRNA NEAT1 expression remains high in osteosarcoma tissues. However, its biological mechanism in osteosarcoma remains unknown. METHODS: In this study, NEAT1 expression in osteosarcoma cells was detected by qRT-PCR. Proliferative and apoptosis potentials of osteosarcoma cells were determined by CCK-8 assay and Flow Cytometry, respectively. We identified the potential target of NEAT1 through bioinformatics and dual-luciferase reporter gene assay. Furthermore, their interaction and functions in regulating the development of osteosarcoma were clarified by Western blot and RIP assay. RESULTS: Our results demonstrated a high expression of NEAT1 in osteosarcoma tissues and cells. Overexpression of NEAT1 markedly accelerated proliferative and reduced apoptosis potentials of osteosarcoma cells. Besides, NEAT1 could positively regulate the expression of HOXA13 by competing with miR-34a-5p. CONCLUSION: These results indicated that NEAT1 participated in the development of osteosarcoma as a ceRNA to competitively bind to miR-34a-5p and thus mediate HOXA13 expression.

Weighted target interval stochastic control methods with global optimization and their applications in individualizing therapy.

Several improvements on the target interval stochastic control (TISC) method are addressed for individualizing therapy. In particular, a global optimization control strategy is implemented to obtain the optimal dosage regimen, and weighting functions are introduced to balance the drug efficacy and the risk of toxicity. Since general guidance is often lacking in the determination of a weighting function, we introduce a systematic approach, i.e., the standard reference gamble method of medical decision theory, for the determination of the weighting function. The population model for the individualization of theophylline therapy reported by D'Argenio and Katz is applied in this research. The present method of the integration of weighting functions and global optimal strategy offer an effective and safe means to balance the drug efficacy and risk of toxicity. In addition, it also achieves better accuracy than the existing TISC method which uses a local optimal strategy.

Sampling schedule design towards optimal drug monitoring for individualizing therapy.

We study the individualization of therapy by simultaneously taking into account the design of sampling schedule and optimal therapeutic drug monitoring. The sampling schedule design in this work is to determine the number of samples, the sampling times, the switching time from the loading to the maintenance period, and the drug dosages. A closed-loop control policy is employed to determine the sampling schedule, and an advanced stochastic global optimization algorithm, which integrates the stochastic approximation and simulated annealing techniques, is implemented to search the optimal sampling schedule. A simulated one-compartment model of intravenous theophylline therapy is used to illustrate our method. This method can be readily extended to multiple compartment systems and allow incorporating other criteria of drug control. While currently the method is mainly of theoretical interest, it offers a starting point for practical applications and thus is hopefully of great value for the clinically individualizing therapy in the future.