Interlamellar-Spacing Engineering of Stable and Toxicity-Reduced 2D Perovskite Single Crystal for High-Resolution X-ray Imaging.

Two-dimensional (2D) lead halide perovskites are excellent candidates for X-ray detection due to their high resistivity, high ion migration barrier, and large X-ray absorption coefficients. However, the high toxicity and long interlamellar distance of the 2D perovskites limit their wide application in high sensitivity X-ray detection. Herein, we demonstrate stable and toxicity-reduced 2D perovskite single crystals (SCs) realized by interlamellar-spacing engineering via a distortion self-balancing strategy. The engineered low-toxicity 2D SC detectors achieve high stability, large mobility-lifetime product, and therefore high-performance X-ray detection. Specifically, the detectors exhibit a record high sensitivity of 13488 µC Gy1- cm-2, a low detection limit of 8.23 nGy s-1, as well as a high spatial resolution of 8.56 lp mm-1 in X-ray imaging, all of which are far better than those of the high-toxicity 2D lead-based perovskite detectors. These advances provide a new technical solution for the low-cost fabrication of low-toxicity, scalable X-ray detectors.

Heterointerface Design of Perovskite Single Crystals for High-Performance X-Ray Imaging.

Metal halide perovskite single crystals (MHP-SCs) are known for their facile fabrication into large sizes using inexpensive solution methods. Owing to their combination of large mobility-lifetime products and strong X-ray absorption, they are considered promising materials for efficient X-ray detection. However, they suffer from large dark currents and severe ion migration, which limit their sensitivity and stability in critical X-ray detection applications. Herein, a heterointerface design is proposed to reduce both the dark current and ion migration by forming a heterojunction. In addition, the carrier transport performance is significantly improved using heterointerface engineering by designing a gradient band structure in the SCs. The SC heterojunction detectors exhibit a high sensitivity of 3.98 × 105 µC Gyair -1 cm-2 with a low detection limit of 12.2 nGyair s-1 and a high spatial resolution of 10.2 lp mm-1 during imaging. These values are among the highest reported for state-of-the-art MHP X-ray detectors. Moreover, the detectors show excellent stability under continuous X-ray irradiation and maintainclear X-ray imaging after 240 d. This study provides novel insights into the design and fabrication of X-ray detectors with high detection efficiency and stability, which are beneficial for developing inexpensive, high-resolution X-ray imaging equipment.

Lattice engineering for stabilized black FAPbI3 perovskite single crystals for high-resolution x-ray imaging at the lowest dose.

Preliminary theoretical analyses indicate that lattice relaxation may be used to release lattice strain in the FAPbI3 perovskite to warrant both high x-ray detection performance and improved stability. Herein, we demonstrate stable black α-phase FAPbI3 single crystals (SCs) realized by lattice engineering via annealing in the ambient atmosphere. The engineered α-FAPbI3 SC detector shows almost all the best figures of merit including a high sensitivity of 4.15 × 105 µC Gyair-1 cm-2, a low detection limit of 1.1 nGyair s-1, a high resolution of 15.9 lp mm-1, and a short response time of 214 µs. We further demonstrate high-definition x-ray imaging at a dose rate below 10 nGyair s-1 on the FAPbI3 SC, indicating a minimal dose-area product of 0.048 mGyair cm2 to the patient for one-time posteroanterior chest diagnosis, which is more than 3000 times lower than the international reference level of 150 mGyair cm2. In addition, the robust long-term stability enables the FAPbI3 SC x-ray detector to work steadily for more than 40 years.

Interlayer-Spacing Engineering of Lead-Free Perovskite Single Crystal for High-Performance X-Ray Imaging.

Lead-free A3 Bi2 I9 -type perovskites are demonstrated as a class of promising semiconductors for high-performance X-ray detection due to their high bulk resistivity and strong X-ray absorption, as well as reduced ion migration. However, due to their long interlamellar distance along their c-axis, their limited carrier transport along the vertical direction is a bottleneck for their detection sensitivity. Herein, a new A-site cation of aminoguanidinium (AG) with all-NH2 terminals is designed to shorten the interlayer spacing by forming more and stronger NH···I hydrogen bonds. The prepared large AG3 Bi2 I9 single crystals (SCs) render shorter interlamellar distance for a larger mobility-lifetime product of 7.94 × 10-3  cm2  V-1 , which is three times higher than the value measured on the best MA3 Bi2 I9 SC (2.87 × 10-3  cm2  V-1 ). Therefore, the X-ray detectors fabricated on the AG3 Bi2 I9 SC exhibit high sensitivity of 5791 uC Gy-1  cm-2 , a low detection limit of 2.6 nGy s-1, and a short response time of 690 µs, all of which are far better than those of the state-of-the-art MA3 Bi2 I9 SC detectors. The combination of high sensitivity and high stability enables astonishingly high spatial resolution (8.7 lp mm-1 ) X-ray imaging. This work will facilitate the development of low-cost and high-performance lead-free X-ray detectors.

Pressure-Tuning Photothermal Synergy to Optimize the Photoelectronic Properties in Amorphous Halide Perovskite Cs3 Bi2 I9.

Effective modification of the structure and properties of halide perovskites via the pressure engineering strategy has attracted enormous interest in the past decade. However, sufficient effort and insights regarding the potential properties and applications of the high-pressure amorphous phase are still lacking. Here, the superior and tunable photoelectric properties that occur in the pressure-induced amorphization process of the halide perovskite Cs3 Bi2 I9 are demonstrated. With increasing pressure, the photocurrent with xenon lamp illumination exhibits a rapid increase and achieves an almost five orders of magnitude increment compared to its initial value. Impressively, a broadband photoresponse from 520 to 1650 nm with an optimal responsivity of 6.81 mA W-1 and fast response times of 95/96 ms at 1650 nm is achieved upon successive compression. The high-gain, fast, broadband, and dramatically enhanced photoresponse properties of Cs3 Bi2 I9 are the result of comprehensive photoconductive and photothermoelectric mechanisms, which are associated with enhanced orbital coupling caused by an increase in BiI interactions in the [BiI6 ]3- cluster, even in the amorphous state. These findings provide new insights for further exploring the potential properties and applications of amorphous perovskites.