Molecular Insights into Soaking in Hybrid N2-CO2 Huff-n-Puff: A Case Study of a Single Quartz Nanopore-Hydrocarbon System.

Hybrid N2-CO2 huff-n-puff (HnP) has been experimentally demonstrated to be a promising approach for improving oil recovery from tight/ultratight shale oil reservoirs. Despite this, the detailed soaking process and interaction mechanisms remain unclear. Adopting molecular dynamic simulations, the soaking behavior of hybrid N2-CO2 HnP was investigated at the molecular and atomic levels. Initially, the soaking process of fluid pressure equilibrium after injection pressure decays in a single matrix nanopore connected to a shale oil reservoir is studied. The study revealed that counter-current and cocurrent displacement processes exist during the CO2 and hybrid N2-CO2 soaking, but cocurrent displacement occurs much later than counter-current displacement. Although the total displacement efficiency of the hybrid N2-CO2 soaking system is lower than that of the CO2 soaking system, the cocurrent displacement initiates earlier in the hybrid N2-CO2 soaking system than in the CO2 soaking system. Moreover, the N2 soaking process is characterized by only counter-current displacement. Next, the soaking process of fluid pressure nonequilibrium before the injection pressure decays is investigated. It was discovered that counter-current and cocurrent displacement processes initiate simultaneously during the CO2, N2, and hybrid N2-CO2 soaking process, but cocurrent displacement exerts a dominant influence. During the CO2 soaking process, many hydrocarbon molecules in the nanopore are dissolved in CO2 while simultaneously exhibiting a substantial retention effect in the nanopore. After pure N2 injection, there is a tendency to form a favorable path of N2 through the oil phase. The injection of hybrid CO2-N2 facilitates the most significant cocurrent displacement effect and the reduction in residual oil retained in the nanopore during the soaking process, thus resulting in the best oil recovery. However, the increase rate in total displacement efficiencies of the different soaking systems over time (especially the hybrid N2-CO2 soaking system) was significantly larger before than after injection pressure decays. Additionally, the displacement effect induced by oil volume swelling is significantly restricted before the injection pressure decays compared to the soaking process after the injection pressure decays. This study explains the role of CO2-induced oil swelling and N2-induced elastic energy played by hybrid N2 and CO2 at different stages of the hybrid N2-CO2 soaking process before and after pressure decays and provides theoretical insights for hybrid gas HnP-enhanced recovery. These pore-scale results highlight the importance of injection pressure and medium composition during the soaking process in unconventional oil reservoirs.

Study on the Effects of Wettability and Pressure in Shale Matrix Nanopore Imbibition during Shut-in Process by Molecular Dynamics Simulations.

Shut-in after fracturing is generally adopted for wells in shale oil reservoirs, and imbibition occurring in matrix nanopores has been proven as an effective way to improve recovery. In this research, a molecular dynamics (MD) simulation was used to investigate the effects of wettability and pressure on nanopore imbibition during shut-in for a typical shale reservoir, Jimsar. The results indicate that the microscopic advancement mechanism of the imbibition front is the competitive adsorption between "interfacial water molecules" at the imbibition front and "adsorbed oil molecules" on the pore wall. The essence of spontaneous imbibition involves the adsorption and aggregation of water molecules onto the hydroxyl groups on the pore wall. The flow characteristics of shale oil suggest that the overall push of the injected water to the oil phase is the main reason for the displacement of adsorbed oil molecules. Thus, shale oil, especially the heavy hydrocarbon component in the adsorbed layer, tends to slip on the walls. However, the weak slip ability of heavy components on the wall surface is an important reason that restricts the displacement efficiency of shale oil during spontaneous imbibition. The effectiveness of spontaneous imbibition is strongly dependent on the hydrophilicity of the matrix pore's wall. The better hydrophilicity of the matrix pore wall facilitates higher levels of adsorption and accumulation of water molecules on the pore wall and requires less time for "interfacial water molecules" to compete with adsorbed oil molecules. During the forced imbibition process, the pressure difference acts on both the bulk oil and the boundary adsorption oil, but mainly on the bulk oil, which leads to the occurrence of wetting hysteresis. Meanwhile, shale oil still existing in the pore always maintains a good, stratified adsorption structure. Because of the wetting hysteresis phenomenon, as the pressure difference increases, the imbibition effect gradually increases, but the actual capillary pressure gradually decreases and there is a loss in the imbibition velocity relative to the theoretical value. Simultaneously, the decline in hydrophilicity further weakens the synergistic effect on the imbibition of the pressure difference because of the more pronounced wetting hysteresis. Thus, selecting an appropriate well pressure enables cost savings and maximizes the utilization of the formation's natural power for enhanced oil recovery (EOR).

Study on the Difference in CO2 and Air Injection in the Fracture/Matrix Dual Medium of Continental Shale Reservoirs.

To clarify the impact of different displacement media on the enhanced oil recovery of continental shale and realize the efficient and reasonable development of shale reservoirs, this paper takes the continental shale of the Lucaogou Formation in the Jimusar Sag in the Junggar Basin (China, Xinjiang) as the research object and uses real cores to build the fracture/matrix dual-medium model. Computerized tomography (CT) scanning is used to visually compare and analyze the influence of fracture/matrix dual-medium and single-matrix medium seepage systems on oil production characteristics and clarify the difference between air and CO2 in enhancing the oil recovery of continental shale reservoirs. Through a comprehensive analysis of the production parameters, the whole oil displacement process can be divided into three stages: the oil-rich and gas-poor stage, oil and gas coproduction stage, and gas-rich and oil-poor stage. Shale oil production follows the rule of fractures first and matrix second. However, for CO2 injection, after the crude oil in the fractures is recovered, the oil in the matrix migrates to the fractures under the action of CO2 dissolution and extraction. Overall, the oil displacement effect of CO2 is better than that of air, resulting in a 5.42% higher final recovery factor. Additionally, fractures can increase the permeability of the reservoir, which can greatly enhance oil recovery in the early oil displacement process. However, as the amount of injected gas increases, its impact gradually decreases, and ultimately, it is consistent with the recovery of nonfractured shale, which can achieve nearly the same development effect.

Single-Cell-Based High-Throughput Cultivation and Functional Characterization of Biosurfactant-Producing Bacteria from Soil and Oilfield-Produced Water.

Biosurfactants are a group of surface-active compounds that can be produced by diverse microorganisms. They have been widely used in various industrial fields. Reducing production costs, improving efficiency, and collecting more diverse producing strains have become major challenges in the biosurfactant industry. These challenges could be overcome by screening for more diverse and efficient biosurfactant-producing strains. The conventional methods for the isolation and functional characterization of microorganisms are laborious and biased toward fast-growing or strongly competitive microorganisms. Here, we established a high-throughput approach of single-cell-based cultivation and functional characterization of biosurfactant-producing bacteria (SCCBB). This approach combines single-cell cultivation with the detection of optical distortions. Using this approach, we isolated 431 strains with biosurfactant production potential from petroleum-contaminated soil and oilfield-produced water. The surfactant production capabilities of the strains were subsequently validated using surface tension measurements, TLC, and CMC measurements. To investigate the industrial production potential, we optimized the production conditions of a representative glycolipids-producing strain, Pseudomonas sp. L01, using response surface methodology (RSM). Optimal conditions yielded a crude biosurfactant yield of 8.43 g/L in a flask. Our work provides a high-throughput approach to the isolation and screening of biosurfactant-producing bacteria, as well as other functional bacteria in a wide range of fields.

Effect of PEO molecular weight on the miscibility and dynamics in epoxy/PEO blends.

In this work, the effect of poly(ethylene oxide) (PEO) molecular weight in blends of epoxy (ER) and PEO on the miscibility, inter-chain weak interactions and local dynamics were systematically investigated by multi-frequency temperature modulation DSC and solid-state NMR techniques. We found that the molecular weight (M(w)) of PEO was a crucial factor in controlling the miscibility, chain dynamics and hydrogen bonding interactions between PEO and ER. A critical PEO molecular weight (M(crit)) around 4.5k was found. PEO was well miscible with ER when the molecular weight was below M(crit), where the chain motion of PEO was restricted due to strong inter-chain hydrogen bonding interactions. However, for the blends with high molecular weight PEO (M(w) > M(crit)), the miscibility between PEO and ER was poor, and most of PEO chains were considerably mobile. Finally, polarization inversion spin exchange at magic angle (PISEMA) solid-state NMR experiment further revealed the different mobility of the PEO in ER/PEO blends with different molecular weight of PEO at molecular level. Based on the DSC and NMR results, a tentative model was proposed to illustrate the miscibility in ER/PEO blends.