Effects of grass type on hydraulic response of the three-layer landfill cover system.

Soil column tests were conducted to investigate the effects of grass type on water infiltration in a three-layer landfill cover under drying and wetting conditions. Five soil columns were prepared, including one bare, two Bermuda grass-planted and the other two vetiver-planted. During the drying period, the suction of vetiver-planted soil column was the largest, while that of bare case was the lowest. During the wetting period, the infiltration rate shows a bimodal form due to the contrasting hydraulic properties of different soil layers. The infiltration rate of vetiver-planted soil column was the lowest, followed by Bermuda grass-planted and bare cases. Correspondingly, the vetiver-planted soil column retained the maximum suction and the deepest ponding depth during rainfall. This was likely due to the larger leaf area and deeper roots of vetiver than those of Bermuda grass, thus inducing the maximum initial suction by root water uptake before rainfall and reducing the water permeability by root occupations of soil pores. These results show that vetiver is more effective than Bermuda grass to reduce water percolation through the three-layer landfill cover.

Two-Dimensional Bis(dithiolene)iron(II) Self-Powered UV Photodetectors with Ultrahigh Air Stability.

Organometallic two-dimensional (2D) nanosheets with tailorable components have recently fascinated the optoelectronic communities due to their solution-processable nature. However, the poor stability of organic molecules may hinder their practical application in photovoltaic devices. Instead of conventional organometallic 2D nanosheets with low weatherability, an air-stable π-conjugated 2D bis(dithiolene)iron(II) (FeBHT) coordination nanosheet (CONASH) is synthesized via bottom-up liquid/liquid interfacial polymerization using benzenehexathiol (BHT) and iron(II) ammonium sulfate [Fe(NH4)2(SO4)2] as precursors. The uncoordinated thiol groups in FeBHT are easily oxidized, but the Fe(NH4)2(SO4)2 dissociation rate is slow, which facilitates the protection of sulfur groups by iron(II) ions. The density functional theory calculates that the resultant FeBHT network gains the oxygen-repelling function for oxidation suppression. In air, the FeBHT CONASH exhibits self-powered photoresponses with short response times (<40 ms) and a spectral responsivity of 6.57 mA W-1, a specific detectivity of 3.13 × 1011 Jones and an external quantum efficiency of 2.23% under 365 nm illumination. Interestingly, the FeBHT self-powered photodetector reveals extremely high long-term air stability, maintaining over 94% of its initial photocurrent after aging for 60 days without encapsulation. These results open the prospect of using organometallic 2D materials in commercialized optoelectronic fields.

Layer-Dependent and In-Plane Anisotropic Properties of Low-Temperature Synthesized Few-Layer PdSe2 Single Crystals.

Palladium diselenide (PdSe2), a peculiar noble metal dichalcogenide, has emerged as a new two-dimensional material with high predicted carrier mobility and a widely tunable band gap for device applications. The inherent in-plane anisotropy endowed by the pentagonal structure further renders PdSe2 promising for novel electronic, photonic, and thermoelectric applications. However, the direct synthesis of few-layer PdSe2 is still challenging and rarely reported. Here, we demonstrate that few-layer, single-crystal PdSe2 flakes can be synthesized at a relatively low growth temperature (300 °C) on sapphire substrates using low-pressure chemical vapor deposition (CVD). The well-defined rectangular domain shape and precisely determined layer number of the CVD-grown PdSe2 enable us to investigate their layer-dependent and in-plane anisotropic properties. The experimentally determined layer-dependent band gap shrinkage combined with first-principle calculations suggest that the interlayer interaction is weaker in few-layer PdSe2 in comparison with that in bulk crystals. Field-effect transistors based on the CVD-grown PdSe2 also show performances comparable to those based on exfoliated samples. The low-temperature synthesis method reported here provides a feasible approach to fabricate high-quality few-layer PdSe2 for device applications.

Solution-processed organometallic quasi-two-dimensional nanosheets as a hole buffer layer for organic light-emitting devices.

Two-dimensional (2D) vdW materials have been integrated into optoelectronic devices to achieve exceptional functionality. However, the integration of large-area 2D thin films into organic light-emitting devices (OLEDs) remains challenging because of the finite number of inorganic 2D materials and the high-temperature requirements of their deposition process. The construction of 2D organometallic materials holds immense potential because of their solution synthesis and unlimited structural and functional diversity. Here, we report a facile route using an oil-water interfacial coordination reaction between organic ligands and divalent metal ions to synthesize crystalline quasi-2D organometallic bis(dithiolato)nickel (NiDT) nanosheets with a centimeter scale and a tunable thickness. The NiDT nanosheets can be directly integrated into OLEDs for use as a hole buffer layer and a fluorescent mounting medium without the aid of a transfer process. Moreover, OLEDs with NiDT nanosheets show not only comparable efficiency to conventional OLEDs but also prolonged device lifetime by nearly 2 times. These results open up a new dimension to use quasi-2D organometallic nanosheets as functional layers in large-area organic devices.

A Triode Device with a Gate Controllable Schottky Barrier: Germanium Nanowire Transistors and Their Applications.

Electrical contacts often dominate charge transport properties at the nanoscale because of considerable differences in nanoelectronic device interfaces arising from unique geometric and electrostatic features. Transistors with a tunable Schottky barrier between the metal and semiconductor interface might simplify circuit design. Here, germanium nanowire (Ge NW) transistors with Cu3 Ge as source/drain contacts formed by both buffered oxide etching treatments and rapid thermal annealing are reported. The transistors based on this Cu3 Ge/Ge/Cu3 Ge heterostructure show ambipolar transistor behavior with a large on/off current ratio of more than 105 and 103 for the hole and electron regimes at room temperature, respectively. Investigations of temperature-dependent transport properties and low-frequency current fluctuations reveal that the tunable effective Schottky barriers of the Ge NW transistors accounted for the ambipolar behaviors. It is further shown that this ambipolarity can be used to realize binary-signal and data-storage functions, which greatly simplify circuit design compared with conventional technologies.

A Versatile Method to Enhance the Operational Current of Air-Stable Organic Gas Sensor for Monitoring of Breath Ammonia in Hemodialysis Patients.

Point-of-care (POC) application for monitoring of breath ammonia (BA) in hemodialysis (HD) patients has emerged as a promising noninvasive health monitoring approach. In this context, many organic gas sensors have been reported for BA detection. However, one of the major challenges for its integration with affordable household POC application is to achieve stable performance for accuracy and high operational current at low voltage for low-cost read-out circuitry. Herein, we exploited the stability of the Donor-Acceptor polymer on the cylindrical nanopore structure to realize the sensors with a high sensitivity and stability. Then, we proposed a double active layer (DL) strategy that exploits an ultrathin layer of Poly(3-hexylthiophene-2,5-diyl) (P3HT) to serve as a work function buffer to enhance the operational current. The DL sensor exhibits a sustainable enhanced operational current of microampere level and a stable sensing response even with the presence of P3HT layer. This effect is carefully examined with different aspects, including vertical composition profile of DL configuration, lifetime testing on different sensing layer, morphological analysis, and the versatility of the DL strategy. Finally, we utilize the DL sensor to conduct a tracing of BA concentration in two HD patients before and after HD, and correlate it with the blood urea nitrogen (BUN) levels. A good correlation coefficient of 0.96 is achieved. Moreover, the feasibility of DL sensor integrated into a low-cost circuitry was also verified. The results demonstrate the potential of this DL strategy to be used to integrate organic sensor for affordable household POC devices.

High Mobilities in Layered InSe Transistors with Indium-Encapsulation-Induced Surface Charge Doping.

Tunability and stability in the electrical properties of 2D semiconductors pave the way for their practical applications in logic devices. A robust layered indium selenide (InSe) field-effect transistor (FET) with superior controlled stability is demonstrated by depositing an indium (In) doping layer. The optimized InSe FETs deliver an unprecedented high electron mobility up to 3700 cm2 V-1 s-1 at room temperature, which can be retained with 60% after 1 month. Further insight into the evolution of the position of the Fermi level and the microscopic device structure with different In thicknesses demonstrates an enhanced electron-doping behavior at the In/InSe interface. Furthermore, the contact resistance is also improved through the In insertion between InSe and Au electrodes, which coincides with the analysis of the low-frequency noise. The carrier fluctuation is attributed to the dominance of the phonon scattering events, which agrees with the observation of the temperature-dependent mobility. Finally, the flexible functionalities of the logic-circuit applications, for instance, inverter and not-and (NAND)/not-or (NOR) gates, are determined with these surface-doping InSe FETs, which establish a paradigm for 2D-based materials to overcome the bottleneck in the development of electronic devices.

Reversible and Precisely Controllable p/n-Type Doping of MoTe2 Transistors through Electrothermal Doping.

Precisely controllable and reversible p/n-type electronic doping of molybdenum ditelluride (MoTe2 ) transistors is achieved by electrothermal doping (E-doping) processes. E-doping includes electrothermal annealing induced by an electric field in a vacuum chamber, which results in electron (n-type) doping and exposure to air, which induces hole (p-type) doping. The doping arises from the interaction between oxygen molecules or water vapor and defects of tellurium at the MoTe2 surface, and allows the accurate manipulation of p/n-type electrical doping of MoTe2 transistors. Because no dopant or special gas is used in the E-doping processes of MoTe2 , E-doping is a simple and efficient method. Moreover, through exact manipulation of p/n-type doping of MoTe2 transistors, quasi-complementary metal oxide semiconductor adaptive logic circuits, such as an inverter, not or gate, and not and gate, are successfully fabricated. The simple method, E-doping, adopted in obtaining p/n-type doping of MoTe2 transistors undoubtedly has provided an approach to create the electronic devices with desired performance.

Interplay of Nanoscale, Hybrid P3HT/ZTO Interface on Optoelectronics and Photovoltaic Cells.

Photovoltaic effects in poly(3-hexylthiophene-2,5-diyl) (P3HT) have attracted much attention recently. Here, natively p-type doped P3HT nanofibers and n-type doped zinc tin oxide (ZTO) nanowires are used for making not only field-effect transistors (FETs) but also p-n nanoscale diodes. The hybrid P3HT/ZTO p-n heterojunction shows applications in many directions, and it also facilitates the investigation of photoelectrons and photovoltaic effects on the nanoscale. As for applications, the heterojunction device shows a simultaneously high on/off ratio of n- and p-type FETs, gatable p-n junction diodes, tristate buffer devices, gatable photodetectors, and gatable solar cells. On the other hand, P3HT nanofibers are taken as a photoactive layer and the role played by the p-n heterojunction in the photoelectric and photovoltaic effects is investigated. It is found that the hybrid P3HT/ZTO p-n heterojunction assists in increasing photocurrents and enhancing photovoltaic effects. Through the controllable gating of the heterojunction, we can discuss the background mechanisms of photocurrent generation and photovoltaic energy harvesting.

Facet-controlled facilitation of PbS nanoarchitectures by understanding nanocrystal growth.

Nanostructured lead sulphide is a significant component in a number of energy-related sustainable applications such as photovoltaic cells and thermoelectric components. In many micro-packaging processes, dimensionality-controlled nano-architectures as building blocks with unique properties are required. This study investigates different facet-merging growth behaviors through a wet-chemical synthetic strategy to produce high-quality controlled nanostructures of lead sulphide in various dimensionalities. It was found that 1D nanowires or 2D nanosheets can be obtained by the merging of reactive {111}- or {110}-facets, respectively, while promoting {100} facets in the early stages after nucleation leads to the growth of 0D nanocubes. The influence of temperature, capping ligands and co-solvent in facilitating the crystal facet growth of each intermediate seed is also demonstrated. The novelty of this work is characterized by the delicate manipulation of various PbS nanoarchitectures based on the comprehension of the facet-merging evolution. The synthesis of facet-controlled PbS nanostructures could provide novel building blocks with desired properties for use in many applications.

Nanocontact Disorder in Nanoelectronics for Modulation of Light and Gas Sensitivities.

To fabricate reliable nanoelectronics, whether by top-down or bottom-up processes, it is necessary to study the electrical properties of nanocontacts. The effect of nanocontact disorder on device properties has been discussed but not quantitatively studied. Here, by carefully analyzing the temperature dependence of device electrical characteristics and by inspecting them with a microscope, we investigated the Schottky contact and Mott's variable-range-hopping resistances connected in parallel in the nanocontact. To interpret these parallel resistances, we proposed a model of Ti/TiOx in the interface between the metal electrodes and nanowires. The hopping resistance as well as the nanocontact disorder dominated the total device resistance for high-resistance devices, especially at low temperatures. Furthermore, we introduced nanocontact disorder to modulate the light and gas responsivities of the device; unexpectedly, it multiplied the sensitivities compared with the intrinsic sensitivity of the nanowires. Our results improve the collective understanding of electrical contacts to low-dimensional semiconductor devices and will aid performance optimization in future nanoelectronics.

Exposure of the hidden anti-ferromagnetism in paramagnetic CdSe:Mn nanocrystals.

We present theoretical and experimental investigations of the magnetism of paramagnetic semiconductor CdSe:Mn nanocrystals and propose an efficient approach to the exposure and analysis of the underlying anti-ferromagnetic interactions between magnetic ions therein. A key advance made here is the development of an analysis method with the exploitation of group theory technique that allows us to distinguish the anti-ferromagnetic interactions between aggregative Mn(2+) ions from the overall pronounced paramagnetism of magnetic-ion-doped semiconductor nanocrystals. By using the method, we clearly reveal and identify the signatures of anti-ferromagnetism from the measured temperature-dependent magnetisms and furthermore determine the average number of Mn(2+) ions and the fraction of aggregative ones in the measured CdSe:Mn nanocrystals.

Ambipolar MoTe2 transistors and their applications in logic circuits.

We report ambipolar charge transport in α-molybdenum ditelluride (MoTe2 ) flakes, whereby the temperature dependence of the electrical characteristics was systematically analyzed. The ambipolarity of the charge transport originated from the formation of Schottky barriers at the metal/MoTe2 contacts. The Schottky barrier heights as well as the current on/off ratio could be modified by modulating the electrostatic fields of the back-gate voltage (Vbg) and drain-source voltage (Vds). Using these ambipolar MoTe2 transistors we fabricated complementary inverters and amplifiers, demonstrating their feasibility for future digital and analog circuit applications.

Strong enhancement of Raman scattering from a bulk-inactive vibrational mode in few-layer MoTe2.

Two-dimensional layered crystals could show phonon properties that are markedly distinct from those of their bulk counterparts, because of the loss of periodicities along the c-axis directions. Here we investigate the phonon properties of bulk and atomically thin α-MoTe2 using Raman spectroscopy. The Raman spectrum of α-MoTe2 shows a prominent peak of the in-plane E(1)2g mode, with its frequency upshifting with decreasing thickness down to the atomic scale, similar to other dichalcogenides. Furthermore, we find large enhancement of the Raman scattering from the out-of-plane B(1)2g mode in the atomically thin layers. The B(1)2g mode is Raman inactive in the bulk, but is observed to become active in the few-layer films. The intensity ratio of the B(1)2g to E(1)2g peaks evolves significantly with decreasing thickness, in contrast with other dichalcogenides. Our observations point to strong effects of dimensionality on the phonon properties of MoTe2.

Programmable redox state of the nickel ion chain in DNA.

DNA is a nanowire in nature which chelates Ni ions and forms a conducting chain in its base-pairs (Ni-DNA). Each Ni ion in Ni-DNA exhibits low (Ni(2+)) or high (Ni(3+)) oxidation state and can be switched sequentially by applying bias voltage with different polarities and writing times. The ratio of low and high oxidation states of Ni ions in Ni-DNA represents a programmable multistate memory system with an added capacitive component, in which multistate information can be written, read, and erased. This study also indicates that the biomolecule-based self-organized nanostructure can be used as a template for nanodevice fabrication.

Effects of cross-sectional area on the tunneling-junction array in octahedral PbSe colloidal-nanocrystal solids.

Octahedral PbSe colloidal nanocrystals (NCs) are used to assemble a solid. Because of the special feature of the apexes of the octahedrons, the cross-sectional area of the inter-dot tunneling junctions is much smaller than that formed between spherical NCs. The inter-dot separation between NCs is easily adjusted by mild thermal treatment. Like a spherical NC-solid, the resistance of the octahedral NC-solid is exponentially dependent on the inter-dot separation. On the contrary, due to the difference in the cross-sectional area between the NCs, electron transport in the octahedral NC-solid does not follow the same model used for the explanation of electron transport in a spherical NC-solid. Through analyses of current-voltage and resistance-temperature behaviors, we have confirmed that the model of fluctuation-induced tunneling conduction fits very well with all of the data and explains the variation in the electrical properties of octahedral PbSe colloidal NC-solids after thermal annealing.

Nanocrystal shape and nanojunction effects on electron transport in nanocrystal-assembled bulks.

Bulk nanostructured materials are made from the assembly of octahedral PbSe nanocrystals. After thermal annealing, the artificial bulk demonstrates a large difference in behavior depending on the temperature, and a large variation of room-temperature resistivity of up to seven orders of magnitude. This variation originates from the high-indexed sharp edges of the octahedral nanocrystals. As the nanocrystals are arranged in the edge-to-edge configuration, which was observed in scanning electron microscopy images, the inter-nanocrystal capacitance is small due to the small parallel area between the nanocrystals. The small capacitance results in a high thermal fluctuation voltage and drives electron transport. The temperature-dependent resistivity and the electric field-dependent current are highly in agreement with the model of fluctuation-induced tunneling conduction. Thermal annealing reduces the inter-nanocrystal separation distance, creating a large variation in the electrical properties. Specifically, octahedral-shaped PbSe nanocrystals are employed in tailoring the electron transport in bulk nanostructured materials.

Structural and electrical properties of conducting diamond nanowires.

Conducting diamond nanowires (DNWs) films have been synthesized by N2-based microwave plasma enhanced chemical vapor deposition. The incorporation of nitrogen into DNWs films is examined by C 1s X-ray photoemission spectroscopy and morphology of DNWs is discerned using field-emission scanning electron microscopy and transmission electron microscopy (TEM). The electron diffraction pattern, the visible-Raman spectroscopy, and the near-edge X-ray absorption fine structure spectroscopy display the coexistence of sp³ diamond and sp² graphitic phases in DNWs films. In addition, the microstructure investigation, carried out by high-resolution TEM with Fourier transformed pattern, indicates diamond grains and graphitic grain boundaries on surface of DNWs. The same result is confirmed by scanning tunneling microscopy and scanning tunneling spectroscopy (STS). Furthermore, the STS spectra of current-voltage curves discover a high tunneling current at the position near the graphitic grain boundaries. These highly conducting regimes of grain boundaries form effective electron paths and its transport mechanism is explained by the three-dimensional (3D) Mott's variable range hopping in a wide temperature from 300 to 20 K. Interestingly, this specific feature of high conducting grain boundaries of DNWs demonstrates a high efficiency in field emission and pave a way to the next generation of high-definition flat panel displays or plasma devices.

Dielectrophoretic placement of quasi-zero-, one-, and two-dimensional nanomaterials into nanogap for electrical characterizations.

DEP is one of promising techniques for positioning nanomaterials into the desirable location for nanoelectronic applications. In contrast, the lithography technique is commonly used to make ultra-thin conducting wires and narrow gaps but, due to the limit of patterning resolution, it is not feasible to make electrical contacts on ultra-small nanomaterials for a bottom-up device fabrication. Thus, integrating the lithography and dielectrophoresis, a real bottom-up fabrication can be achieved. In this work, the device with the nanogap in between two nanofinger-electrodes is made using electron-beam lithography from top down and the ultra-small nanomaterials, such as colloidal PbSe quantum dots, polyaniline nanofibers, and reduced-graphene-oxide flakes, are placed in the nanogap by DEP from bottom up. The threshold electric field for the DEP placement of PbSe nanocrystals was roughly estimated to be about 8.3 × 10(4) V/cm under our experimental configuration. After the DEP process, several procedures for reducing contact resistances are attempted and measurements of intrinsic electron transport in versatile nanomaterials are performed. It is experimentally confirmed that electron transport in both PbSe nanocrystal arrays and polyaniline nanofibers agrees well with Prof. Ping Sheng's model of granular metallic conduction. In addition, electron transport in reduced-graphene-oxide flakes follows Mott's 2D variable-range-hopping model. This study illustrates an integration of the electron-beam lithography and the DEP techniques for a precise manipulation of nanomaterials into electronic circuits for characterization of intrinsic properties.

Nano approach investigation of the conduction mechanism in polyaniline nanofibers.

A nanotechnological approach is applied to measurements of the electric field dependence of resistance under a high electric field while in low voltage. With this technique, the conduction mechanism on a mesoscopic scale is explored in a single, nonagglomerated nanofiber. Polyaniline nanofibers are prepared by vigorous mixing of aniline and oxidation agent ammonium persulfate in acid solution. They exhibit a uniform nanoscale morphology rather than agglomeration as that produced via conventional chemical oxidation. The as-synthesized polyaniline nanofibers are doped (dedoped) with a HCl acid (NH(3) base), and their temperature behaviors of resistances follow an exponential function with an exponent of T(-1/2). To measure the conduction mechanism in a single nanofiber, the dielectrophoresis technique is implemented to position nanofibers on top of two electrodes with a nanogap of 100-600 nm, patterned by electron-beam lithography. After the devices are irradiated by electron beam to reduce contact resistances, their temperature behaviors and electric field dependences are unveiled. The experimental results agree well with the theoretical model of charging energy limited tunneling. Other theoretical models such as Efros-Shklovskii and Mott's one-dimensional hopping conduction are excluded after comparisons and arguments. Through fitting, the size of the conductive grain, separation distance between two grains, and charging energy per grain in a single polyaniline nanofiber are estimated to be about 4.9 nm, 2.8 nm, and 78 meV, respectively. The nanotechnological approach, where the nanogap and the dielectrophoresis technique are used for single nanofiber device fabrication, is applied for determination of mesoscopic charge transport in a polyaniline conducting polymer.