The essential oils chemical compositions and antimicrobial, antioxidant activities and toxicity of three Hyptis species.

CONTEXT: Hyptis suaveolens (Linn.) Poit., Hyptis rhomboidea Mart. et Gal., and Hyptis brevipes Poit., are three species of Hyptis Jacq. (Lamiaceae). Hyptis suaveolens is used for the treatment of fever, headache, gastrointestinal bloating and rheumatism in the traditional folk medicine; Hyptis rhomboidea for hepatitis, ulcer and swollen poison; and Hyptis brevipes for asthma and malaria. OBJECTIVE: To characterize chemical compositions of the oils from three Hyptis species and evaluate their potential antimicrobial, radical scavenging activities and toxicities against brine shrimp. MATERIALS AND METHODS: The oils were obtained by hydrodistillation, and their chemical compositions were investigated by gas chromatography-mass spectrometry (GC-MS). Minimum inhibitory concentrations (MICs) were determined using the tube double-dilution technique. The antioxidant activities were investigated using the 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay and toxicities by the brine shrimp bioassay. RESULTS: Forty-seven, 33 and 28 constituents of oils isolated, respectively, from H. suaveolens, H. rhomboidea and H. brevipes were identified. Among the essential oils, the strongest antioxidant activity was exhibited by H. brevipes with an SC50 value of 2.019 ± 0.25 µg mL⁻¹. The H. brevipes oil exhibited the strongest antimicrobial activity (3.125-6.25 µg mL⁻¹) on pathogens employed in the assay. They all showed significant toxicities with median lethal concentration (LC50) values of 62.2 ± 3.07 µg mL⁻¹, 65.9 ± 6.55 µg mL⁻¹ and 60.8 ± 9.04 µg mL⁻¹, respectively. DISCUSSION AND CONCLUSIONS: The three Hyptis species oils possess strong antimicrobial activities and toxicities. Hyptis rhomboidea and H. brevipes showed considerable antioxidant activity compared to the positive control.

Antioxidant and anti-fatigue effects of anthocyanins of mulberry juice purification (MJP) and mulberry marc purification (MMP) from different varieties mulberry fruit in China.

Anthocyanins, copiously distributed in a variety of colored fruits and vegetables, are probably the most important group of visible plant pigments besides chlorophyll. And the mulberry fruit is one of the anthocyanins-rich fruits. Total flavonols, total phenolic acids and anthocyanins contents of ten varieties mulberry juice purification (MJP) and mulberry marc purification (MMP) were determined. The highest content was 965.63±4.90 mg RE/g, 690.83±7.38 mg GAE/g and 272.00±1.20 mg cyanidin-3-glucoside/g FW, respectively. Moreover, MJP and MMP exhibited high antioxidant activity, including total force reduction (TRP), Fe³âº reducing power (FRAP) and DPPH • radical scavenging capacity. In addition, the anti-fatigue activity of MJP and MMP was determined through mice-burden swimming experiments. Interestingly, the antioxidant and anti-fatigue capacities of MMP were much higher than those of MJP. The experimental results suggested that the generally discarded mulberry marc had greater value of development and utilization as food processing waste.

Subclinical hyperthyroidism and the risk of cardiovascular events and all-cause mortality: an updated meta-analysis of cohort studies.

OBJECTIVES: Whether subclinical hyperthyroidism (SCH) results in poor prognosis remains controversial. Our aim was to evaluate the association between SCH and the risk of cardiovascular disease (CVD), cardiovascular mortality, and all-cause mortality by conducting a meta-analysis of cohort studies. METHODS: The PubMed and Embase databases were searched through November 2011 to identify studies that met pre-stated inclusion criteria. Relevant information for analysis was extracted. Either a fixed or a random effects model was used to calculate the overall combined risk estimates. RESULTS: Seventeen cohort studies were included in this meta-analysis. The overall combined relative risks for individuals with SCH compared with the reference group were 1.19 (95% confidence interval (CI): 1.10 to 1.28) for CVD, 1.52 (95% CI: 1.08 to 2.13) for cardiovascular mortality, and 1.25 (95% CI: 1.00 to 1.55) for all-cause mortality. Subgroup analysis by sample source (community or convenience sample) showed that the significant association for cardiovascular and all-cause mortality only existed when pooling studies from convenience samples. Heterogeneity was observed when pooling studies on the association between SCH and cardiovascular and all-cause mortality. Sensitivity analysis showed omission of each individual study did not significantly change the pooled effects. No evidence of publication bias was observed. CONCLUSIONS: Our findings demonstrated that SCH significantly increased the risk of CVD for the general population and the risk of cardiovascular and all-cause mortality for the individuals with other morbidities.

A strong inorganic acid-initiated methacrylate polymerization strategy for room temperature preparation of monolithic columns for capillary electrochromatography.

A facile strong inorganic acid-initiated methacrylate polymerization strategy was developed for fabricating monolithic columns at room temperature. The prepared monoliths were characterized by FTIR spectrometry, mercury intrusion porosimeter and SEM, while their performance was evaluated by CEC for the separation of various types of compounds including alkyl benzenes, polycyclic aromatic hydrocarbons, nonsteroidal anti-inflammatory drugs, anilines, and nitrophenol isomers. The column-to-column and batch-to-batch reproducibility for the prepared monoliths in terms of the RSD of EOF flow velocity, retention factor, and the minimum plate height of naphthalene ranged from 3.4 to 12.4%. The fabricated monoliths gave excellent performance for the separation of the test neutral compounds with the theoretical plates of 170,000-232,000 plates per meter for thiourea, and 77,400-112,300 plates per meter for naphthalene. The proposed strong inorganic acid-initiated methacrylate polymerization strategy is a promising alternative for fabricating organic polymer-based monoliths.

In situ hydrothermal growth of metal-organic framework 199 films on stainless steel fibers for solid-phase microextraction of gaseous benzene homologues.

Metal-organic frameworks (MOFs) have received great attention due to their fascinating structures and intriguing potential applications in various fields. Herein, we report the first example of the utilization of MOFs for solid-phase microextraction (SPME). MOF-199 with unique pores and open metal sites (Lewis acid sites) was employed as the coating for SPME fiber to extract volatile and harmful benzene homologues. The SPME fiber was fabricated by in situ hydrothermal growth of thin MOF-199 films on etched stainless steel wire. The MOF-199-coated fiber not only offered large enhancement factors from 19,613 (benzene) to 110,860 (p-xylene), but also exhibited wide linearity with 3 orders of magnitude for the tested benzene homologues. The limits of detection for the benzene homologues were 8.3-23.3 ng L(-1). The relative standard deviation (RSD) for six replicate extractions using one SPME fiber ranged from 2.0% to 7.7%. The fiber-to-fiber reproducibility for three parallel prepared fibers was 3.5%-9.4% (RSD). Indoor air samples were analyzed for the benzene homologues using the SPME with the MOF-199-coated fiber in combination with gas chromatography-flame ionization detection. The recoveries for the spiked benzene homologues in the collected indoor air samples were in the range of 87%-106%. The high affinity of the MOF-199-coated fiber to benzene homologues resulted from the combined effects of the large surface area and the unique porous structure of the MOF-199, the pi-pi interactions of the aromatic rings of the analytes with the framework 1,3,5-benzenetricarboxylic acid molecules, and the pi-complexation of the electron-rich analytes to the Lewis acid sites in the pores of MOF-199.

Hydrofluoric acid etched stainless steel wire for solid-phase microextraction.

Stainless steel wire has been widely used as the substrate of solid-phase microextraction (SPME) fibers to overcome the shortcomings of conventional silica fibers such as fragility, by many researchers. However, in previous reports various sorbent coatings are always required in conjunction with the stainless steel wire for SPME. In this work, we report the bare stainless steel wire for SPME without the need for any additional coatings taking advantage of its high mechanical and thermal stability. To evaluate the performance of stainless steel wire for SPME, polycyclic aromatic hydrocarbons (PAHs), benzene, toluene, ethylbenzene, chlorobenzene, n-propylbenzene, aniline, phenol, n-hexane, n-octane, n-decane, n-undecane, n-dodecane, chloroform, trichloroethylene, n-octanol, and butanol were tested as analytes. Although the stainless steel wire had almost no extraction capability toward the tested analytes before etching, it did exhibit high affinity to the tested PAHs after etching with hydrofluoric acid. The etched stainless steel wire gave a much bigger enhancement factor (2541-3981) for the PAHs than the other analytes studied (< or = 515). Etching with hydrofluoric acid produced a porous and flower-like structure with Fe(2)O(3), FeF(3), Cr(2)O(3), and CrF(2) on the surface of the stainless steel wire, giving high affinity to the PAHs due to cation-pi interaction. On the basis of the high selectivity of the etched stainless steel wire for PAHs, a new SPME method was developed for gas chromatography with flame ionization detection to determine PAHs with the detection limits of 0.24-0.63 microg L(-1). The precision for six replicate extractions using one SPME fiber ranged from 2.9% to 5.3%. The fiber-to-fiber reproducibility for three parallel prepared fibers was 4.3-8.8%. One etched stainless steel wire can stand over 250 cycles of SPME without significant loss of extraction efficiency. The developed etched stainless steel wire is very stable, highly selective, and reproducible for the SPME of PAHs.

A capillary electrophoresis assay for recombinant Bacillus subtilis protoporphyrinogen oxidase.

Protoporphyrinogen oxidase (PPO) is a flavin adenine dinucleotide (FAD)-containing enzyme in the tetrapyrrole biosynthetic pathway that leads to the formation of both heme and chlorophylls, which has been identified as one of the most important action targets of commercial herbicides. The literature reports gave different PPO-catalytic kinetic parameters for the substrate protoporphyrinogen IX (K(m) of 0.1 to 10.4 miocroM) with different sources of PPO using fluorescent or HPLC methods. Herein we assayed the enzymatic activity of recombinant Bacillus subtilis PPO by using capillary electrophoresis (CE), a method with high separation efficiency, easy automation, and low sample consumption. The Michaelis constant and maximum reaction velocity were determined as 7.0+/-0.6 miocroM and 0.38+/-0.02 miocromol min(-1)miocrog(-1), respectively. The interaction between PPO and acifluorfen, a commercial PPO-inhibiting herbicide, was measured as the inhibition constant 186.9+/-9.3 miocroM EM, Cyrillic. The relationship between cofactor FAD and PPO activity can also be quantitatively studied by this CE method. The CE method used here should also be a convenient, reliable method for PPO study.

Multiwalled carbon nanotubes coated fibers for solid-phase microextraction of polybrominated diphenyl ethers in water and milk samples before gas chromatography with electron-capture detection.

Determination of polybrominated diphenyl ethers (PBDEs) in environmental samples has raised great concerns due to the widespread use of PBDEs and their potential risk to humans. Solid-phase microextraction (SPME) is a fast, simple, cost-effective, and green sample preparation technique and is widely used for environmental analysis, but reports on the application of SPME for determination of PBDEs are very limited, and only a few publications dealing with commercial SPME fibers are available for extraction of PBDEs. Herein, we report a novel SPME method using multiwalled carbon nanotubes (MWCNTs) as the SPME fiber coating for gas chromatography with electron-capture detection (GC-ECD) of PBDEs in environmental samples. The MWCNTs coating gave much higher enhancement factors (616-1756) than poly (5% dibenzene-95% dimethylsiloxane) coating (139-384) and activated carbon coating (193-423). Thirty-minute extraction of 10 mL of sample solution using the MWCNTs coated fiber for GC-ECD determination yielded the limits of detection of 3.6-8.6 ng L(-1) and exhibited good linearity of the calibration functions (r(2)>0.995). The precision (RSD%, n=4) for peak area and retention time at the 500 ng L(-1) level was 6.9-8.8% and 0.6-0.9%, respectively. The developed method was successfully applied for the analysis of real samples including local river water, wastewater, and milk samples. The recovery of the PBDEs at 500 ng L(-1) spiked in these samples ranged from 90 to 119%. No PBDEs were detected in the river water and skimmed milk samples, whereas in the wastewater sample, 134-215 ng L(-1) of PBDEs were found. The PBDEs were detected in all whole fat milk samples, ranging from 13 to 484 ng L(-1). In a semiskimmed milk sample, only BDE-47 was found at 21 ng L(-1).

Determination of substituted benzenes in water samples by fiber-in-tube liquid phase microextraction coupled with gas chromatography.

A method for determination of toluene, ethylbenzene, p-xylene, o-xylene, 1,3,5-trimethylbenzene and 1,2,4-trimethylbenzene in water samples was developed by a fiber-in-tube liquid phase microextraction technique (fiber-in-tube LPME) coupled with GC-flame ionization detector (FID). The method used a tube packed with polytetrafluoroethylene (PTFE) fibers as an extraction medium, improving the stableness of the solvent and the performance of extraction. Certain amounts of curled PTFE fibers were packed into a section of PTFE tube. Because the fibers were curled, they formed network structure in the tube. The fiber packed tube was firstly immersed into organic solvent to be filled with organic solvent and then was exposing to an aqueous solution to extract the target compounds. The extract was then retracted by a conventional GC microsyringe and analyzed by GC-FID. Extraction of the analytes in 8 ml aqueous solution for 15 min yielded enrichment factors of 224-361. The precision (R.S.D., n=5) was 3.6-8.1% for peak area. The limit of detection (LOD, S/N=3) for the six substituted benzenes were in the range of 0.3-5.0 microgl(-1).

On-line coupling of flow injection displacement sorption preconcentration to high-performance liquid chromatography for speciation analysis of mercury in seafood.

A simple and cost-effective method for speciation analysis of trace mercury in seafood was developed by on-line coupling flow injection microcolumn displacement sorption preconcentration to high-performance liquid chromatography (HPLC) with UV detection. The methodology involved the presorption of the Cu-PDC (pyrrolidine dithiocarbamate) chelate onto a microcolumn packed with a cigarette filter sorbent, simultaneous preconcentration of Hg(II), methylmercury (MeHg), ethylmercury (EtHg), and phenylmercury (PhHg) onto the microcolumn through a displacement reaction with the presorbed Cu-PDC, and their subsequent elution from the microcolumn for on-line HPLC separation. Interferences from heavy metal ions with lower stability of their PDC chelates relative to Cu-PDC were minimized without the need of any masking agents. With the consumption of 4.0 ml of sample solution, the enrichment factors were about 80. The detection limits were 10-25 ng g(-1) (as Hg) in fresh tissue. Precision (R.S.D. (%), n = 5) ranged from 2 to 3% at the 500 microg l(-1) (as Hg) level. The developed technique was validated by analyzing a certified reference material (DORM-2, dogfish-muscle), and was shown to be useful for mercury speciation in real seafood samples.

Cloud point extraction for high-performance liquid chromatographic speciation of Cr(III) and Cr(VI) in aqueous solutions.

Cloud point extraction (CPE) was applied as a preconcentration step for HPLC speciation of chromium in aqueous solutions. Simultaneous preconcentration of Cr(III) and Cr(VI) in aqueous solutions was achieved by CPE with diethyldithiocarbamate (DDTC) as the chelating agent and Triton X-114 as the extractant. Baseline separation of the DDTC chelates of Cr(III) and Cr(VI) was realized on a RP-C18 column with the use of a mixture of methanol-water-acetonitrile (65:21:14, v/v) buffered with 0.05 M NaAc-HAc solution (pH 3.6) as the mobile phase at a flow rate of 1.0 ml min(-1). The precision (R.S.D.) for eight replicate injections of a mixture of 100 microg l(-1) of Cr(III) and Cr(VI) were 0.6 and 0.5% for the retention time, 4.1 and 4.6% for the peak area measurement, respectively. The concentration factor, which is defined as the concentration ratio of the analyte in the final diluted surfactant-rich extract ready for HPLC separation and in the initial solution, was 65 for Cr(III) and 19 for Cr(VI). The linear concentration range was from 50 to 1000 microg l(-1) for Cr(III) and 50-2000 microg l(-1) for Cr(VI). The detection limits of Cr(III) and Cr(VI) were 3.4 and 5.2 microg l(-1), respectively. The developed method was applied to the speciation of Cr(III) and Cr(VI) in snow water, river water, seawater and wastewater samples.

Speciation of mercury by hydrostatically modified electroosmotic flow capillary electrophoresis coupled with volatile species generation atomic fluorescence spectrometry.

A novel method for speciation analysis of mercury was developed by on-line hyphenating capillary electrophoresis (CE) with atomic fluorescence spectrometry (AFS). The four mercury species of inorganic mercury Hg(II), methymercury MeHg(I), ethylmercury EtHg(I), and phenylmercury PhHg(I) were separated as mercury-cysteine complexes by CE in a 50-cm x 100-microm-i.d. fused-silica capillary at 15 kV and using a mixture of 100 mmol L(-1) of boric acid and 12% v/v methanol (pH 9.1) as electrolyte. A novel technique, hydrostatically modified electroosmotic flow (HSMEOF) in which the electroosmotic flow (EOF) was modified by applying hydrostatical pressure opposite to the direction of EOF was used to improve resolution. A volatile species generation technique was used to convert the mercury species into their respective volatile species. A newly developed CE-AFS interface was employed to provide an electrical connection for stable electrophoretic separations and to allow on-line volatile species formation. The generated volatile species were on-line detected with AFS. The precisions (RSD, n = 5) were in the range of 1.9-2.5% for migration time, 1.8-6.3% for peak area response, and 2.3-6.1% for peak height response for the four mercury species. The detection limits ranged from 6.8 to 16.5 microg L(-1) (as Hg). The recoveries of the four mercury species in the water samples were in the range of 86.6-111%. The developed technique was successfully applied to speciation analysis of mercury in a certified reference material (DORM-2, dogfish muscle).