Air-Stable Li2S Cathodes Enabled by an In Situ-Formed Li+ Conductor for Graphite-Li2S Pouch Cells.

Using Li2S cathodes instead of S cathodes presents an opportunity to pair them with Li-free anodes (e.g., graphite), thereby circumventing anode-related issues, such as poor reversibility and safety, encountered in Li-S batteries. However, the moisture-sensitive nature of Li2S causes the release of hazardous H2S and the formation of insulative by-products, increasing the manufacturing difficulty and adversely affecting cathode performance. Here, Li4SnS4, a Li+ conductor that is air-stable according to the hard-soft acid-base principle, is formed in situ and uniformly on Li2S particles because Li2S itself participates in Li4SnS4 formation. When exposed to air (20% relative humidity), the protective Li4SnS4 layer maintains its components and structure, thus contributing to the enhanced stability of the Li2S@Li4SnS4 composite. In addition, the Li4SnS4 layer can accelerate the sluggish conversion of Li2S because of its favorable interfacial charge transfer, and continuously confine lithium polysulfides owing to its integrity during electrochemical processes. A graphite-Li2S pouch cell containing a Li2S@Li4SnS4 cathode is constructed, which shows stable cyclability with 97% capacity retention after 100 cycles. Hence, combining a desirable air-stable Li2S cathode and a highly reversible Li-free configuration offers potential practical applications of graphite-Li2S full cells.

A method for Porphyromonas gingivalis based on recombinase polymerase amplification and lateral flow strip technology.

OBJECTIVE: A practical visual detection method was established to detect Porphyromonas gingivalis (P. gingivalis) by employing a combination of recombinase polymerase amplification and lateral flow strips (RPA-LF) assay, designed for conducting point-of-care testing in clinical settings. METHODS: Primers and probes targeting the P. gingivalis pepO gene were designed. The RPA-LF assay was established by optimising reaction temperature and time, determining the limit of detection (LOD). The specificity of the method was determined by assessing its cross-reactivity with deoxyribonucleic acid from 23 pathogenic bacteria. Finally, the clinical samples from healthy controls (n = 30) and individuals with periodontitis (n = 31) were analysed. The results were compared with those obtained using real-time polymerase chain reaction (PCR). RESULTS: The optimal reaction temperature and time were 39 °C and 12 min. The method exhibited a LOD at 6.40 × 10-4 µg/mL and demonstrated high specificity and sensitivity during cross-reactivity assessment. The RPA-LF assay achieved a P. gingivalis detection rate of 84 % in individuals with periodontitis and 3 % in healthy controls. The results were consistent with those obtained through real-time PCR. CONCLUSION: An RPA-LF assay was developed for detecting P. gingivalis, characterised by its high sensitivity, high specificity, simple operational procedure, and rapid reaction time.

Demystifying the Salt-Induced Li Loss: A Universal Procedure for the Electrolyte Design of Lithium-Metal Batteries.

Lithium (Li) metal electrodes show significantly different reversibility in the electrolytes with different salts. However, the understanding on how the salts impact on the Li loss remains unclear. Herein, using the electrolytes with different salts (e.g., lithium hexafluorophosphate (LiPF6), lithium difluoro(oxalato)borate (LiDFOB), and lithium bis(fluorosulfonyl)amide (LiFSI)) as examples, we decouple the irreversible Li loss (SEI Li+ and "dead" Li) during cycling. It is found that the accumulation of both SEI Li+ and "dead" Li may be responsible to the irreversible Li loss for the Li metal in the electrolyte with LiPF6 salt. While for the electrolytes with LiDFOB and LiFSI salts, the accumulation of "dead" Li predominates the Li loss. We also demonstrate that lithium nitrate and fluoroethylene carbonate additives could, respectively, function as the "dead" Li and SEI Li+ inhibitors. Inspired by the above understandings, we propose a universal procedure for the electrolyte design of Li metal batteries (LMBs): (i) decouple and find the main reason for the irreversible Li loss; (ii) add the corresponding electrolyte additive. With such a Li-loss-targeted strategy, the Li reversibility was significantly enhanced in the electrolytes with 1,2-dimethoxyethane, triethyl phosphate, and tetrahydrofuran solvents. Our strategy may broaden the scope of electrolyte design toward practical LMBs.

Electrochemical Reactivation of Dead Li2 S for Li-S Batteries in Non-Solvating Electrolytes.

The use of non-solvating, or as-called sparingly-solvating, electrolytes (NSEs), is regarded as one of the most promising solutions to the obstacles to the practical applications of Li-S batteries. However, it remains a puzzle that long-life Li-S batteries have rarely, if not never, been reported with NSEs, despite their good compatibility with Li anode. Here, we find the capacity decay of Li-S batteries in NSEs is mainly due to the accumulation of the dead Li2 S at the cathode side, rather than the degradation of the anodes or electrolytes. Based on this understanding, we propose an electrochemical strategy to reactivate the accumulated Li2 S and revive the dead Li-S batteries in NSEs. With such a facile approach, Li-S batteries with significantly improved cycling stability and accelerated dynamics are achieved with diglyme-, acetonitrile- and 1,2-dimethoxyethane-based NSEs. Our finding may rebuild the confidence in exploiting non-solvating Li-S batteries with practical competitiveness.

Ultralean Electrolyte Li-S Battery by Avoiding Gelation Catastrophe.

Due to the poor electronic conductivity of solid sulfur and sulfides, the dissolution of Sα- (α = 0, 2/8, 2/6, 2/4) into a liquid electrolyte and the vehicular diffusion of Sα- to carbon black are necessary for the electrochemical activity of a sulfur cathode in lithium-sulfur (Li-S) batteries. However, exactly how much dissolution and diffusion are required for high sulfur utilization and how this may control the minimum electrolyte/sulfur ratio, (E/S)min, have not been quantitatively settled. In this work, we show experimentally that a dissolved polysulfide concentration which is too high (>10-20 MS) may gel the liquid electrolyte, leading to catastrophic loss of Sα- mobility, a failure mode that is especially susceptible in a high-donor-number (DN) electrolyte under a lean condition (low E/S), similar to a traffic jam, resulting in high electrochemical polarization and low sulfur utilization. In contrast, we show that a low-DN electrolyte, even with a low polysulfide solubility of 0.1-0.5 MS, will never encounter a gelation catastrophe even at extremely low E/S, leading to unprecedentedly high energy density. Specifically, high sulfur utilizations of 96% (1600 mAh g-1) and 78% (1300 mAh g-1) are reached in an electrolyte as lean as E/S = 2 and 1 µL mg-1 Li-S coin cells when DME1.6LiFSI-HFE of low solvation capability (DN = 13.9) is adopted, even paired against a high-sulfur-loading cathode (5 mg cm-2).

Drug delivery systems for oral disease applications.

There are many restrictions on topical medications for the oral cavity. Various factors affect the topical application of drugs in the oral cavity, an open and complex environment. The complex physical and chemical environment of the oral cavity, such as saliva and food, will influence the effect of free drugs. Therefore, drug delivery systems have served as supporting structures or as carriers loading active ingredients, such as antimicrobial agents and growth factors (GFs), to promote antibacterial properties, tissue regeneration, and engineering for drug diffusion. These drug delivery systems are considered in the prevention and treatment of dental caries, periodontal disease, periapical disease, the delivery of anesthetic drugs, etc. These carrier materials are designed in different ways for clinical application, including nanoparticles, hydrogels, nanofibers, films, and scaffolds. This review aimed to summarize the advantages and disadvantages of different carrier materials. We discuss synthesis methods and their application scope to provide new perspectives for the development and preparation of more favorable and effective local oral drug delivery systems.

Drug delivery systems for oral disease applications

Abstract There are many restrictions on topical medications for the oral cavity. Various factors affect the topical application of drugs in the oral cavity, an open and complex environment. The complex physical and chemical environment of the oral cavity, such as saliva and food, will influence the effect of free drugs. Therefore, drug delivery systems have served as supporting structures or as carriers loading active ingredients, such as antimicrobial agents and growth factors (GFs), to promote antibacterial properties, tissue regeneration, and engineering for drug diffusion. These drug delivery systems are considered in the prevention and treatment of dental caries, periodontal disease, periapical disease, the delivery of anesthetic drugs, etc. These carrier materials are designed in different ways for clinical application, including nanoparticles, hydrogels, nanofibers, films, and scaffolds. This review aimed to summarize the advantages and disadvantages of different carrier materials. We discuss synthesis methods and their application scope to provide new perspectives for the development and preparation of more favorable and effective local oral drug delivery systems.