Femtosecond-scale all-optical switching in oxyfluorogallate glass induced by nonlinear multiphoton absorption.

Herein, all-optical switching based on a new type of oxyfluorogallate glass with high switching efficiency and ultrafast response time was reported in the near-infrared wavelength range, which is of great importance for applications in optical telecommunication. The structural and optical properties, as well as the nonlinear optical effects, of the oxyfluorogallate glass were investigated, demonstrating a good figure of merit applicable to nonlinear optical devices. Using pump-probe experiments, we found that the switching time in the oxyfluorogallate glass due to nonlinear multiphoton absorption was approximately 350 fs, which was limited by the pulse duration of the near-infrared probe pulse. Additionally, the largest on-off amplitude of this optical switching device could reach ∼12%, which is in sharp contrast to that of quartz glass. Thus, this study provides a suitable material for the manufacture of integrated photonic devices, which are crucial for promoting the application of glass on-chip photonics.

Physicochemical Characteristics and Dynamic Charge Mapping in Thermally Aged Two-Layered Polymer Considering Surface States: Experiment and Simulation.

Under operational conditions of high electric fields and elevated temperatures, the accumulation of space charges at multilayer insulation interfaces is often considered as an important factor affecting insulation performance. This study experimentally explored the influence of different thermal aging degrees (110 °C for 0, 720, 1600, 2100, and 2900 h) on physicochemical characteristics. The space charge dynamics in two-layered thermally aged PET-PET films were measured using the pulsed electro-acoustic (PEA) method and simulated on the basis of a one-dimensional modified bipolar charge transport model. The parameterization for key parameters involved in the model was analyzed through parameter sensitivity. Results indicated that the molecular structure, crystallinity, and dielectric spectra of the PET films are affected by thermal aging. The thermalization process also has noticeable effect on the surface state characteristics, which are characterized by deeper trap depth and larger trap density. Several experimental phenomena measured by the PEA method were observed on the basis of numerical simulation.

Near-field imaging of the multi-resonant mode induced broadband tunable metamaterial absorber.

Metamaterial absorbers with tunability have broad prospects for mid-infrared absorption applications. While various methods have been proposed to control absorption, how to analyse and present the physical image of absorption mechanism in depth is still expected and meaningful. Here, we present experimental spatial near-field distributions of a multi-resonant mode induced broadband tunable metamaterial absorber by using near-field optical microscopy. The absorber is constructed by a metal double-sized unit cell and a metallic mirror separated by a thin Ge2Sb2Te5 (GST) spacer. To clearly obtain the physical images, we used a hybrid unit cell consisting of four square resonators to produce two absorption peaks at 7.8 µm and 8.3 µm. The resonance central-wavelength exhibits a redshift while switching the GST thin film from amorphous to crystalline phase. The near-field amplitude and phase optical responses of the absorber are directly observed at absorption frequencies when GST is in both phases, respectively. This work will pave the way for the fundamental science field and inspire potential applications in optical tunable absorption control.

An All-Inorganic Perovskite-Phase Rubidium Lead Bromide Nanolaser.

Rubidium lead halides (RbPbX3 ), an important class of all-inorganic metal halide perovskites, are attracting increasing attention for photovoltaic applications. However, limited by its lower Goldschmidt tolerance factor t≈0.78, all-inorganic RbPbBr3 has not been reported. Now, the crystal structure, X-ray diffraction (XRD) pattern, and band structure of perovskite-phase RbPbBr3 has now been investigated. Perovskite-phase RbPbBr3 is unstable at room temperature and transforms to photoluminescence (PL)-inactive non-perovskite. The structural evolution and mechanism of the perovskite-non-perovskite phase transition were clarified in RbPbBr3 . Experimentally, perovskite-phase RbPbBr3 was realized through a dual-source chemical vapor deposition and annealing process. These perovskite-phase microspheres showed strong PL emission at about 464 nm. This new perovskite can serve as a gain medium and microcavity to achieve broadband (475-540 nm) single-mode lasing with a high Q of about 2100.

Failure Characteristics and Mechanism of Nano-Modified Oil-Impregnated Paper Subjected to Repeated Impulse Voltage.

Nano-modification is a prospective method for improving the electrical properties of transformer oil. In most situations, transformer oil combined with cellulose paper is used to construct an insulation system for power equipment, such as power transformers. However, the influence of nanoparticles on the electrical performance of oil-impregnated paper is still unclear. Therefore, in this paper, we identify the failure characteristics of both fresh and nano-modified oil/paper. Specifically, the accumulative failure characteristics of nano-oil-impregnated paper (NOIP) are experimentally determined. The space charge distribution and trap characteristics of fresh paper and NOIP were measured, and the effect of nanoparticles on the space charge behavior are then analyzed. Finally, we measure the microstructure of fresh paper and NOIP subjected to repeated impulses. The test results indicate that nano-titanium oxide (TiO2) particles have a limited effect on the breakdown voltage of NOIP. However, the particles can dramatically improve the resistant ability of NOIP against repeated impulses. For the NOIP with a nano-concentration of 0.25 g/L, the improvement reaches 62.5% compared with fresh paper. Under repeated applications of impulse voltages, the space charge density of NOIP is much lower than that of fresh paper. The deep trap density of NOIP is much higher than that of fresh OIP, whereas shallow trap density is relatively lower. Micropores are generated in paper insulation subjected to repeated impulses. The amount of the generated micropores in NOIP is lower than that in fresh paper. Nano-TiO2 particles suppress the accumulation of space charge in the oil paper insulation, which weakens the electric field distortion in the dielectric. However, nanoparticles reduce the accumulative damage caused by repeated impulses. The above two points are considered the main reasons to improve the resistant ability against repeated impulses.

Single-Mode Lasers Based on Cesium Lead Halide Perovskite Submicron Spheres.

Single-mode laser is realized in a cesium lead halide perovskite submicron sphere at room temperature. All-inorganic cesium lead halide (CsPbX3, X = Cl, Br, I) microspheres with tunable sizes (0.2-10 µm) are first fabricated by a dual-source chemical vapor deposition method. Due to smooth surface and regular geometry structure of microspheres, whispering gallery resonant modes make a single-mode laser realized in a submicron sphere. Surprisingly, a single-mode laser with a very narrow line width (∼0.09 nm) was achieved successfully in the CsPbX3 spherical cavity at low threshold (∼0.42 µJ cm-2) with a high cavity quality factor (∼6100), which are the best specifications of lasing modes in all natural nano/microcavities ever reported. By modulating the halide composition and sizes of the microspheres, the wavelength of a single-mode laser can be continuously tuned from red to violet (425-715 nm). This work illustrates that the well-controlled synthesis of metal cesium lead halide perovskite nano/microspheres may offer an alternative route to produce a widely tunable and greatly miniaturized single-mode laser.

Mid-infrared laser emission from Cr:ZnS channel waveguide fabricated by femtosecond laser helical writing.

The operation of a mid-infrared laser at 2244 nm in a Cr:ZnS polycrystalline channel waveguide fabricated using direct femtosecond laser writing with a helical movement technique is demonstrated. A maximum power output of 78 mW and an optical-to-optical slope efficiency of 8.6% are achieved. The compact waveguide structure with 2 mm length was obtained through direct femtosecond laser writing, which was moved on a helical trajectory along the laser medium axis and parallel to the writing direction.

Three-photon-excited upconversion luminescence of niobium ions doped silicate glass by a femtosecond laser irradiation.

We report on the bluish green upconversion luminescence of niobium ions doped silicate glass by a femtosecond laser irradiation. The dependence of the fluorescence intensity on the pump power density of laser indicates that the conversion of infrared irradiation to visible emission is dominated by three-photon excitation process. We suggest that the charge transfer from O(2-) to Nb(5+) can efficiently contribute to the bluish green emission. The results indicate that transition metal ions without d electrons play an important role in fields of optics when embedded into silicate glass matrix.

Three-photon-excited upconversion luminescence of Ce(3+): YAP crystal by femtosecond laser irradiation.

Infrared to ultraviolet and visible upconversion luminescence was demonstrated in trivalent cerium doped YAlO(3) crystal (Ce(3+): YAP) under focused infrared femtosecond laser irradiation. The fluorescence spectra show that the upconverted luminescence comes from the 5d-4f transitions of trivalent cerium ions. The dependence of luminescence intensity of trivalent cerium on infrared pumping power reveals that the conversion of infrared radiation is dominated by three-photon excitation process. It is suggested that the simultaneous absorption of three infrared photons pumps the Ce(3+) ion into upper 5d level, which quickly nonradiatively relax to lowest 5d level. Thereafter, the ions radiatively return to the ground states, leading to the characteristic emission of Ce(3+).

Near infrared broadband emission of bismuth-doped aluminophosphate glass.

Near infrared broadband emission characteristics of bismuth-doped aluminophosphate glass have been investigated. Broad infrared emissions peaking at 1210nm, 1173nm and 1300nm were observed when the glass was pumped by 405nm laser diode (LD), 514nm Ar+ laser and 808nm LD, respectively. The full widths at half maximum (FWHMs) are 235nm, 207nm and 300nm for the emissions at 1210nm, 1173nm and 1300nm, respectively. Based on the energy matching conditions, it is suggested that the infrared emission may be ascribed to 3P1? 3P0 transition of Bi+. The broadband infrared luminescent characteristics of the glasses indicate that they are promising for broadband optical fiber amplifiers and tunable lasers.

Infrared broadband emission of bismuth-doped barium-aluminum-borate glasses.

We report near infrared broadband emission of bismuth-doped barium-aluminum-borate glasses. The broadband emission covers 1.3microm window in optical telecommunication systems. And it possesses wide full width at half maximum (FWHM) of ~200nm and long lifetime as long as 350micros. The luminescent properties are quite sensitive to glass compositions and excitation wavelengths. Based on energy matching conditions, we suggest that the infrared emission may be ascribed to 3P1? 3P0 transition of Bi+. The broad infrared emission characteristics of this material indicate that it might be a promising candidate for broadband optical fiber amplifiers and tunable lasers.

Direct writing computer-generated holograms on metal film by an infrared femtosecond laser.

Writing computer-generated holograms have been achieved by using a near infrared femtosecond laser selective ablation of metal film deposited on glass substrate. The diffraction features with data reconstruction of the fabricated computer-generated holograms were evaluated. Both transmission and reflection holograms can be fabricated in a single process. The process requires no mask, no pre- or post-treatment of the substrate.

Optical transfer of periodic microstructures by interfering femtosecond laser beams.

We report on an optical interference method for transferring periodic microstructures of metal film from a supporting substrate to a receiving substrate by means of five-beam interference of femtosecond laser pulses. Scanning electron microscopy and optical microscopy revealed microstructures with micrometer-order were transferred to the receiving substrate. In the meanwhile, a negative copy of the transferred structures was induced in the metal film on the supporting substrate. The diffraction characteristics of the transferred structures were also evaluated. The present technique allows one-step realization of functional optoelectronic devices.

Upconversion luminescence from 2E state of Cr3+ in Al2O3 crystal by infrared femtosecond laser irradiation.

Visible upconversion luminescence was observed in Cr3+: Al2O3 crystal under focused femtosecond laser irradiation. The luminescence spectra show that the upconversion luminescence originates from the 2E-4A2 transition of Cr3+. The dependence of the fluorescence intensity of Cr3+ on the pump power reveals that a two-photon absorption process dominates in the conversion of infrared radiation to the visible emission. It is suggested that the simultaneous absorption of two infrared photons produces the population of upper excited states, which leads to the characteristic visible emission from 2E state of Cr3+.

Bismuth- and aluminum-codoped germanium oxide glasses for super-broadband optical amplification.

Broadband infrared luminescence from bismuth-doped germanium oxide glasses prepared by a conventional melting-quenching technique was discovered. The absorption spectrum of the glasses covered a wide range from the visible to the near-infrared wavelength regions and consisted of five broad peaks below 370, 500, 700, 800, and 1000 nm. The fluorescence spectrum exhibited broadband characteristics (FWHM) greater than 300 nm with a maximum at 1300 nm pumped by an 808-nm laser. The fluorescence lifetime at room temperature decreased with increasing Bi2O3 concentration in the glass. Codoping of aluminum and bismuth was indispensable for the broadband infrared luminescence in GeO2:Bi, Al glass.

Optical properties of structurally modified glasses doped with gold ions.

We report on the optical properties of a structurally modified silicate glass doped with Au ions. The area in the vicinity of the focal point of an 800-nm femtosecond laser in a glass sample became gray as a result of the formation of color centers after laser irradiation and turned red because of precipitation of Au nanoparticles after further annealing at 550 degrees C for 30 min. When the glass was excited by UV light at 365 nm, yellowish-white and orange-yellow emissions were observed in the laser-irradiated and the Au-nanoparticle-precipitated area, respectively. An optical Kerr shutter experiment showed that the Au nanoparticle-precipitated glass had an ultrafast nonlinear optical response, and the third-order nonlinear susceptibility was estimated to be approximately 10(-11) esu.

Fabrication of internal diffraction gratings in calcium fluoride crystals by a focused femtosecond laser.

We report the fabrication of internal diffraction gratings in calcium fluoride crystals by a focused near-IR 800 nm femtosecond laser. The diffraction efficiency and refractive index change were evaluated after femtosecond laser irradiation and subsequent annealing. The maximum refractive index change was estimated to be 3.57x10(-4). Optical absorption spectra, measured for the crystals before and after the laser irradiation and subsequent annealing, indicate that the absorbance increase after femtosecond laser irradiation and decrease with increasing annealing temperature. The mechanisms of refractive index change are proposed. The results may be useful for fabrication of three-dimensional integrated optics devices in the crystals.

Controllable precipitation and dissolution of silver nanoparticles in ultrafast laser pulses irradiated Ag+-doped phosphate glass.

We report a controllable process of recipitation and dissolution of silver nanoparticles in ultrashort laser pulses irradiated Ag+-doped phosphate glass. Absorption spectra, transmission electron microscopy and refractive index measurement revealed that metallic silver nanoparticles were precipitated in the glass sample after irradiation by an 800-nm femtosecond laser and subsequent annealing at 300 degrees C, and dissolved after further annealing at 450 degrees C. We discuss a mechanism that combines the formation and decoloration of color centers, precipitation and dissolution of silver nanoparticles.