Effect of High-Riding Vertebral Artery on the Accuracy and Safety of C2 Pedicle Screw Placement in Basilar Invagination and Related Risk Factors.

STUDY DESIGN: Retrospective cohort study. OBJECTIVE: To investigate the effect of HRVA on the intrapedicular accuracy of C2PS placement through the freehand method in patients with BI and analyse the possible risk factors for C2PS malpositioning. METHOD: A total of 91 consecutive patients with BI who received 174 unilateral C2PS placements through the freehand method were retrospectively included. The unilateral pedicles were assigned to the HRVA and non-HRVA groups. The primary outcome was the intrapedicular accuracy of C2PS placement in accordance with the Gertzbein-Robbins scale. Moreover, the risk factors that possibly affected intrapedicular accuracy were assessed. RESULTS: The rate of intrapedicular accuracy in C2PS placement in patients with BI was 23.6%. Results showed that the non-HRVA group had remarkably higher rates of optimal and clinically acceptable C2PS placement than the HRVA group. Nevertheless, the HRVA group exhibited similar results for grade B classification as the non-HRVA group. Moreover, in the HRVA and non-HRVA groups, the most common direction of screw deviations was the lateral direction. Furthermore, the multivariate analyses showed that the obliquity of the lateral atlantoaxial joint in the sagittal plane ≥15°, and that in the coronal plane ≥ 20°, isthmus height < 4.3 mm, and distance from the skin to the spinous process ≥ 2.8 cm independently contributed to a high rate of screw malpositioning in BI patients. CONCLUSION: The presence of HRVA in BI patients contributed to the high rate of malpositioning in C2PS placement via the freehand method. However, the rates of intrapedicular accuracy in patients with BI with and without HRVA were considerably low.

Ideal entry point and trajectory for C2 pedicle screw placement in basilar invagination patients with high-riding vertebral artery based on 3D computed tomography.

BACKGROUND: C2 pedicle screw placement in patients with basilar invagination (BI) is fraught with risks because of a high incidence of anatomical variations and high-riding vertebral artery (HRVA). However, no study can be found in the literature that attempted to identify the ideal entry point and trajectory through the C2 pedicle in BI patients with HRVA. PURPOSE: To investigate the parameters of ideal entry point and trajectory for C2 pedicle screw placement in BI patients with HRVA and compare them with those in BI patients without HRVA and patients without BI as control. These parameters would serve as a guide to pedicle screw placement. STUDY DESIGN: A retrospective comparative study. PATIENT SAMPLE: A total of 396 patients (198 consecutive BI patients and 198 matched patients without BI as control) and 792 unilateral pedicles from April 2017 to October 2021 at two medical centers were included. OUTCOME MEASURES: The insertion parameters of mediolateral angle, surface distance, cephalad angle, and vertical distance from the superior border of the lamina were the primary outcome measures for the reference of C2 pedicle screw placement. Furthermore, factors that affect the primary insertion parameters were assessed via multiple linear regression analyses. METHOD: According to the diagnosis of BI and HRVA, the unilateral pedicles were assigned into HRVA of BI, non-HRVA of BI, HRVA of control, and non-HRVA of control groups. Subgroup analyses based on Goel types A and B were also performed. Moreover, vertebral artery (VA) anomalies that might result in potentially serious complications were identified and systematically compared. RESULTS: The measurements of insertion parameters in BI patients with HRVA indicated a mean mediolateral angle of 27.42°, a mean cephalad angle of 43.02°, a mean surface distance of 9.74 mm, and a mean vertical distance from the superior border of the lamina of 3.85 mm. Compared with that in BI patients without HRVA, the measurements suggested that the entry point in BI patients with HRVA should be shifted upward by 0.38 mm and the trajectory should be angled cephalad by 6.05° and medially by 4.78°. In the control group, changes in the insertion parameters between HRVA and non-HRVA showed a similar trend to the BI group. Multiple linear regression showed that mediolateral angle was significantly associated with the male gender (B=-0.930, p=.017) and the diagnoses of HRVA (B=6.964, p<.001), Goel type A (B=-1.656, p=.003), and Goel type B (B=0.981, p=.030). Moreover, cephalad angle was significantly associated with the length of lateral mass (B=-0.319, p=.001) and the diagnoses of HRVA (B=3.254, p<.001) and Goel type A (B=6.924, p<.001). The VA anomalies were significantly higher in the BI group than in the control group. CONCLUSIONS: The insertion parameters of the ideal entry point and trajectory for C2 screw placement in BI patients with HRVA were remarkably different from those of non-HRVA of BI, HRVA of control, and non-HRVA of control cohorts. Preoperative 3D computed tomography (CT) and CT angiography are highly recommended in such patients to improve intraoperative safety and reduce postoperative complications.

Characteristics and Comparisons of Morphometric Measurements and Computed Tomography Hounsfield Unit Values of C2 Laminae for Translaminar Screw Placement Between Patients With and Without Basilar Invagination.

OBJECTIVE: Patients with basilar invagination (BI) had high incidences of vertebral variations and high-riding vertebral artery (HRVA) that might restrict the use of pedicle or pars screw and increase the use of translaminar screw on axis. Here, we conducted a radiographic study to investigate the feasibility of translaminar screws and the bone quality of C2 laminae in patients with BI, which were compared with those without BI as control to provide guidelines for safe placement. METHODS: In this study, a total of 410 patients (205 consecutive patients with BI and 205 matched patients without BI) and 820 unilateral laminae of the axis were included at a 1:1 ratio. Comparisons with regard to insertion parameters (laminar length, thickness, angle, and height) for C2 translaminar screw placement and Hounsfield unit (HU) values for the assessment of the appropriate bone mineral density of C2 laminae between BI and control groups were performed. Besides, the subgroup analyses based on the Goel A and B classification of BI, HRVA, atlas occipitalization, and C2/3 assimilation were also carried out. Furthermore, the factors that might affect the insertion parameters and HU values were explored through multiple linear regression analyses. RESULTS: The BI group showed a significantly smaller laminar length, thickness, height, and HU value than the control group, whereas no significant difference was observed regarding the laminar angle. By contrast, the control group showed significantly higher rates of acceptability for unilateral and bilateral translaminar screw fixations than the BI group. Subgroup analyses showed that the classification of Goel A and B, HRVA, atlas occipitalization, and C2/3 assimilation affected the insertion parameters except the HU values. Multiple linear regression indicated that the laminar length was significantly associated with the male gender (B = 0.190, p < 0.001), diagnoses of HRVA (B = -0.109, p < 0.001), Goel A (B = -0.167, p < 0.001), and C2/3 assimilation (B = -0.079, p = 0.029); the laminar thickness was significantly associated with the male gender (B = 0.353, p < 0.001), diagnoses of HRVA (B = -0.430, p < 0.001), Goel B (B = -0.249, p = 0.026), and distance from the top of odontoid to the Chamberlain line (B = -0.025, p = 0.003); laminar HU values were significantly associated with age (B = -2.517, p < 0.001), Goel A (B = -44.205, p < 0.001), Goel B (B = -25.704, p = 0.014), and laminar thickness (B = -11.706, p = 0.001). CONCLUSION: Patients with BI had narrower and smaller laminae with lower HU values and lower unilateral and bilateral acceptability for translaminar screws than patients without BI. Preoperative 3-dimensional computed tomography (CT) and CT angiography were needed for BI patients.

α7-nAChR Activation Has an Opposite Effect on Healing of Covered and Uncovered Wounds.

The α7 nicotinic acetylcholine receptor (α7-nAChR) is associated with inflammation, re-epithelialization, and angiogenesis in wound healing process. A recent study demonstrated that PNU-282987, a selective agonist of α7-nAChR, accelerates the repair of diabetic excisional wounds. Whether α7-nAChR activation promotes non-diabetic wounds healing is unknown. The aim of this study was to evaluate the effects of α7-nAChR activation on non-diabetic wound healing. The effects were evaluated in two wound models. In the first model, the wound was covered with a semi-permeable transparent dressing. In the second model, the wound was left uncovered. In both models, the mice were randomly assigned to two treatment groups: saline or PNU282987 (25 mice in each group). In covered wounds, we found that α7-nAChR activation inhibited re-epithelialization, angiogenesis, and epithelial cells proliferation, promoted neo-epithelial detachment, and suppressed neutrophil infiltration and the expression of interleukin-6 (IL-6) and vascular endothelial growth factor (VEGF). However, in uncovered wounds, we observed that α7-nAChR activation promoted re-epithelialization and angiogenesis, inhibited neutrophil infiltration and the expression of high mobility group box (HMGB)-1, epidermal growth factor (EGF), and VEGF. In conclusion, this data demonstrated that α7-nAChR activation inhibited wound healing in covered wounds but played an opposite role in uncovered wounds. The opposite effect might be primarily due to inhibition of inflammation.