RESUMO
The present study attempts to clean up nitric oxide from the simulated flue gas using aqueous chlorine-dioxide solution in the bubbling reactor. Chlorine-dioxide is generated by chloride-chlorate process. Experiments are carried out to examine the effect of various operating variables like input NO concentration, presence of SO(2), pH of the solution and NaCl feeding rate on the NO(x) removal efficiency at 45 degrees C. Complete oxidation of nitric oxide into nitrogen dioxide occurred on passing sufficient ClO(2) gas into the scrubbing solution. NO is finally converted into nitrate and ClO(2) is reduced into chloride ions. A plausible reaction mechanism concerning NO(x) removal by ClO(2) is suggested. DeNO(x) efficiency increased slightly with the increasing input NO concentration. The presence of SO(2) improved the NO(2) absorption but pH of solution showed marginal effect on NO(2) absorption. NO(x) removal mechanism changed when medium of solution changed from acidic to alkaline. A constant NO(x) removal efficiency of about 60% has been achieved in the wide pH range of 3-11 under optimized conditions.
Assuntos
Poluentes Atmosféricos/química , Poluição do Ar/prevenção & controle , Compostos Clorados/química , Óxidos de Nitrogênio/química , Oxidantes/química , Óxidos/química , Concentração de Íons de Hidrogênio , Cloreto de Sódio/química , Dióxido de Enxofre/química , Gerenciamento de Resíduos/métodosRESUMO
The present study attempts to generate chlorine dioxide (ClO(2)) gas continuously by chlorate-chloride process and to utilize it further to clean up SO(2) and NO(x) gases simultaneously from the flue gas in the lab-scale bubbling reactor. Experiments were carried out to examine the effect of various operating parameters like input SO(2) concentration, input NO concentration, pH of the reaction medium, and ClO(2) feeding rate on the SO(2) and NO(x) removal efficiencies at 45 degrees C. Complete oxidation of NO into NO(2) occurred on passing sufficient ClO(2) gas into the scrubbing solution. SO(2) removal efficiency of about 100% and NO(x) removal efficiency of 66-72% were achieved under optimized conditions. NO(x) removal efficiency decreased slightly with increasing pH and NO concentration. Input SO(2) concentration had marginal catalytic effect on NO(2) absorption. No improvement in the NO(x) removal efficiency was observed on passing excess of chlorine dioxide in the scrubbing solution.
