Inkjet-printed optical interference filters.

Optical interference filters (OIFs) are vital components for a wide range of optical and photonic systems. They are pivotal in controlling spectral transmission and reflection upon demand. OIFs rely on optical interference of the incident wave at multilayers, which are fabricated with nanometer precision. Here, we demonstrate that these requirements can be fulfilled by inkjet printing. This versatile technology offers a high degree of freedom in manufacturing, as well as cost-affordable and rapid-prototyping features from the micron to the meter scale. In this work, via rational ink design and formulation, OIFs were fully inkjet printed in ambient conditions. Longpass, shortpass, bandpass, and dichroic OIFs were fabricated, and precise control of the spectral response in OIFs was realized. Subsequently, customized lateral patterning of OIFs by inkjet printing was achieved. Furthermore, upscaling of the printed OIFs to A4 size (29.7 × 21.0 cm²) was demonstrated.

Triple-junction perovskite-perovskite-silicon solar cells with power conversion efficiency of 24.4.

The recent tremendous progress in monolithic perovskite-based double-junction solar cells is just the start of a new era of ultra-high-efficiency multi-junction photovoltaics. We report on triple-junction perovskite-perovskite-silicon solar cells with a record power conversion efficiency of 24.4%. Optimizing the light management of each perovskite sub-cell (∼1.84 and ∼1.52 eV for top and middle cells, respectively), we maximize the current generation up to 11.6 mA cm-2. Key to this achievement was our development of a high-performance middle perovskite sub-cell, employing a stable pure-α-phase high-quality formamidinium lead iodide perovskite thin film (free of wrinkles, cracks, and pinholes). This enables a high open-circuit voltage of 2.84 V in a triple junction. Non-encapsulated triple-junction devices retain up to 96.6% of their initial efficiency if stored in the dark at 85 °C for 1081 h.

Organosilicon-Based Ligand Design for High-Performance Perovskite Nanocrystal Films for Color Conversion and X-ray Imaging.

Perovskite nanocrystals (PNCs) bear a huge potential for widespread applications, such as color conversion, X-ray scintillators, and active laser media. However, the poor intrinsic stability and high susceptibility to environmental stimuli including moisture and oxygen have become bottlenecks of PNC materials for commercialization. Appropriate barrier material design can efficiently improve the stability of the PNCs. Particularly, the strategy for packaging PNCs in organosilicon matrixes can integrate the advantages of inorganic-oxide-based and polymer-based encapsulation routes. However, the inert long-carbon-chain ligands (e.g., oleic acid, oleylamine) used in the current ligand systems for silicon-based encapsulation are detrimental to the cross-linking of the organosilicon matrix, resulting in performance deficiencies in the nanocrystal films, such as low transparency and large surface roughness. Herein, we propose a dual-organosilicon ligand system consisting of (3-aminopropyl)triethoxysilane (APTES) and (3-aminopropyl)triethoxysilane with pentanedioic anhydride (APTES-PA), to replace the inert long-carbon-chain ligands for improving the performance of organosilicon-coated PNC films. As a result, strongly fluorescent PNC films prepared by a facile solution-casting method demonstrate high transparency and reduced surface roughness while maintaining high stability in various harsh environments. The optimized PNC films were eventually applied in an X-ray imaging system as scintillators, showing a high spatial resolution above 20 lp/mm. By designing this promising dual organosilicon ligand system for PNC films, our work highlights the crucial influence of the molecular structure of the capping ligands on the optical performance of the PNC film.

Pathways for achieving conservation targets under metacoupled anthropogenic disturbances.

Enhancing connectivity between protected areas stands as a paramount objective in advancing global conservation goals, particularly in coastal regions grappling with escalating human disruptions. However, little attention has been given to quantitative assessment of human-nature interactions within and among protected areas. Here, we endeavored to model the connectivity between protected areas in rapidly urbanizing regions in China, drawing on insights from the framework of metacoupling based on connected corridors at short and long distances. In alignment with the overarching global conservation aim of increasing the overall coverage of protected areas, we found that adding new site to the protected area system yields superior connectivity gains compared to merely expanding the boundaries of the existing sites. Within the connectivity network between protected areas, we discerned specific sites acting as stepping stones, pivotal in enhancing connectivity among the chosen protected areas. Our study propounds a pragmatic methodology for prioritizing local protection initiatives and underscores the criticality of incorporating connectivity conservation strategies. This approach is vital for attaining regional biodiversity targets, given the dual perspective encompassing both human activities and the natural environment, particularly in the face of mounting anthropogenic disturbances.

Distributed Feedback Lasers by Thermal Nanoimprint of Perovskites Using Gelatin Gratings.

To date, thermal nanoimprint lithography (NIL) for patterning hybrid perovskites has always involved an intricate etching step of a hard stamp material or its master. Here, we demonstrate for the first time the successful nanopatterning of a perovskite film by NIL with a low-cost polymeric stamp. The stamp consists of a dichromated gelatin grating structured by holographic lithography. The one-dimensional grating is imprinted into a perovskite film at 95 °C and 90 MPa for 10 min, resulting in a high quality second-order distributed feedback (DFB) laser. The laser exhibits an excellent performance with a threshold of 81 µJ/cm2, a line width of 0.32 nm, and a pronounced linear polarization. This novel approach enables cost-effective fabrication of high-quality DFB lasers compatible with different perovskite compositions and photonic nanostructures for a wide range of applications.

The Impact of Carbon Nanotube Length and Diameter on their Global Alignment by Dead-End Filtration.

Dead-end filtration has proven to effectively prepare macroscopically (3.8 cm2 ) aligned thin films from solutionbased single-wall carbon nanotubes (SWCNTs). However, to make this technique broadly applicable, the role of SWCNT length and diameter must be understood. To date, most groups report the alignment of unsorted, large diameter (≈1.4 nm) SWCNTs, but systematic studies on their small diameter are rare (≈0.78 nm). In this work, films with an area of A = 3.81 cm2 and a thickness of ≈40 nm are prepared from length-sorted fractions comprising of small and large diameter SWCNTs, respectively. The alignment is characterized by cross-polarized microscopy, scanning electron microscopy, absorption and Raman spectroscopy. For the longest fractions (Lavg = 952 nm ± 431 nm, Δ = 1.58 and Lavg = 667 nm ± 246 nm, Δ = 1.55), the 2D order parameter, S2D, values of ≈0.6 and ≈0.76 are reported for the small and large diameter SWCNTs over an area of A = 625 µm2 , respectively. A comparison of Derjaguin, Landau, Verwey, and Overbeek (DLVO) theory calculations with the aligned domain size is then used to propose a law identifying the required length of a carbon nanotube with a given diameter and zeta potential.

Fabrication of Bragg Mirrors by Multilayer Inkjet Printing.

Bragg mirrors are widely applied in optical and photonic devices due to their capability of light management. However, the fabrication of Bragg mirrors is mainly accomplished by physical and chemical vapor deposition processes, which are costly and do not allow for lateral patterning. Here, the fabrication of Bragg mirrors by fully inkjet printing is reported. The photonic bandgap of Bragg mirrors is tailored by adjusting the number of bilayers in the stack and the layer thickness via simply varying printing parameters. An ultrahigh reflectance of 99% is achieved with the devices consisting of ten bilayers only, and the central wavelength of Bragg mirrors is tuned from visible into near-infrared wavelength range. Inkjet printing allows for fabricating Bragg mirrors on various substrates (e.g., glass and foils), in different sizes and variable lateral patterns. The printed Bragg mirrors not only exhibit a high reflection at designed wavelengths but also show an outstanding homogeneity in color over a large area. The approach thus enables additive manufacturing for various applications ranging from microscale photonic elements to enhanced functionality and aesthetics in large-area displays and solar technologies.

Urinary and faecal metabolic characteristics in APP/PS1 transgenic mouse model of Alzheimer's disease with and without cognitive decline.

Alzheimer's disease (AD) has been considered to be a systematic metabolic disorder, but little information is available about metabolic changes in the urine and feces. In this study, we investigated urinary and faecal metabolic profiles in amyloid precursor protein/presenilin 1 (APP/PS1) mice at 3 and 9 months of age (3 M and 9 M) and age-matched wild-type (WT) mice by using 1H NMR-based metabolomics, and aimed to explore changes in metabolic pathways during amyloid pathology progression and identify potential metabolite biomarkers at earlier stage of AD. The results show that learning and memory abilities were impaired in APP/PS1 mice relative to WT mice at 9 M, but not at 3 M. However, metabolomics analysis demonstrates that AD disrupted metabolic phenotypes in the urine and feces of APP/PS1 mice at both 3 M and 9 M, including amino acid metabolism, microbial metabolism and energy metabolism. In addition, several potential metabolite biomarkers were identified for discriminating AD and WT mice prior to cognitive decline with the AUC values from 0.755 to 0.971, such as taurine, hippurate, urea and methylamine in the urine as well as alanine, leucine and valine in the feces. Therefore, our results not only confirmed AD as a metabolic disorder, but also contributed to the identification of potential biomarkers at earlier stage of AD.

Metal-free [2 + 1 + 3] Cycloaddition of Trifluoroacetaldehyde N-Sulfonylhydrazones with Hexahydro-1,3,5-triazines Leading to Trifluoromethylated 2,3,4,5-Tetrahydro-1,2,4-triazines.

A transition-metal-free [2 + 1 + 3] cycloaddition of trifluoroacetaldehyde N-sulfonylhydrazone and hexahydro-1,3,5-triazine was described. This operationally simple protocol provides a general synthesis of diverse trifluoromethylated 2,3,4,5-tetrahydro-1,2,4-triazines in 81-97% yield with a broad substrate scope, including aryl, benzyl, and alkyl hexahydro-1,3,5-triazine.

Gold nanoplasmonic particles in tunable porous silicon 3D scaffolds for ultra-low concentration detection by SERS.

A composite material of plasmonic nanoparticles embedded in a scaffold of nano-porous silicon offers unmatched capabilities for use as a SERS substrate. The marriage of these components presents an exclusive combination of tightly focused amplification of Localised Surface Plasmon (LSP) fields inside the material with an extremely high surface-to-volume ratio. This provides favourable conditions for a single molecule or extremely low concentration detection by SERS. In this work the advantage of the composite is demonstrated by SERS detection of Methylene Blue at a concentration as low as a few picomolars. We systematically investigate the plasmonic properties of the material by imaging its morphology, establishing its composition and the effect on the LSP resonance optical spectra.