RESUMO
Spirobichroman-based polymers with high gas permeability and selectivity are promising for their applications as membranes in gas separation. In this study, three spirobichroman-based polyimides (PIs; 6FDA-FH, 6FDA-DH, and 6FDA-MH) were synthesised by the polyreaction between diamines containing different substituents (benzene ring, pyridine ring, and methyl group) and 4,4'-(hexafluoroisopropylidene)-diphthalic anhydride (6FDA). The physical properties, gas transport behaviour, d-spacing, dihedral angle of molecules, and fractional free volume of the PIs were investigated through experiments and molecular simulations. The PIs exhibited excellent thermal stability and good solubility in common organic solvents. The gas permeability of the PIs was investigated; the results highlighted the critical role of the substituents in the enhancement of the gas separation performance of polymer membranes. Detailed analysis of the PIs showed that 6FDA-FH exhibits the highest gas permeability. This can be ascribed to the loose packing of the polymer chain owing to the increased dihedral angle between the two planes. However, the methyl substituent in 6FDA-MH disrupts the polymer chain packing rather than changing the dihedral angle between the two planes, thus enhancing the gas permeability of 6FDA-MH. Furthermore, 6FDA-DH exhibited the highest CO2/CH4 selectivity, which is attributed to the CO2 affinity of the polymer containing the pyridine unit.
RESUMO
Electrochromic (EC)/electrofluorochromic (EFC) bifunctional materials are receiving great attention because of their promising applications in optoelectronic devices. However, the development of ideal EC/EFC bifunctional materials is still a great challenge because of the poor integration of EC/EFC performances (optical contrast, response speed, and switching stability). Herein, we reported two novel diphenylamine-based mixed valence (MV) polyamides (S-HPA and P-HPA) with spirobifluorene (2,7-positions) and pyrene (1,6-positions) as bridged fluorescence units, respectively, showing impressive cyclability and fluorescence contrast with rapid switching. Through the formation of an effective electronic coupling between the two nitrogen centers using spirobifluorene/pyrene bridges, we demonstrated that different bridges have significant effects on the thermal and electrooptical characteristics of polyamides. In addition to lower fluorescence quantum yield and glass transition temperature, the S-HPA exhibited superior cyclability (contrast change <3.4%/14% over 500/300 cycles for EC/EFC switching), higher color/fluorescence contrast (64%/304%), and faster switching time (<2.6 s), mainly owing to the shorter conjugated length and more twisted configuration of the spirobifluorene bridge. The design principle of MV polymers with fluorophore bridges proposed here will be a promising way to realize high-performance EC/EFC devices and will also provide new insights into their future development and applications.
RESUMO
In this work, hydrogenated bisphenol A (HBPA) based dinitro mixed isomers (1a' and 1a) were synthesized and separated via vacuum distillation under the monitor of DSC and 1H NMR. Corresponding diamines (2a' and 2a) were separately polycondensed with five commercial dianhydrides via a two-step thermal imidization to obtain PI-(1'-5') and PI-(1-5). All the polyimides could afford flexible, tough, and transparent films, and most of them were readily soluble not only in common polar solvents like DMAc, but also in low boiling point solvents such as chloroform. 1H NMR spectra of the polyimides demonstrated that HBPA moiety showed no conformation changes during the preparation of polymers. For a given dianhydride, PI-(1-5) exhibited better thermal stability than that of PI-(1'-5'), this can be attributed that the equatorial, equatorial C-O in PI-(1-5) promoted denser and more regular molecular chain stacking, as can be evidenced by the WAXD and geometric optimization results. Additionally, when the dianhydride was ODPA, BPADA or 6FDA, no apparent difference was found in either the transmittance or solubility between two series of polyimides, which could be attributed that twisted and flexible ether linkages, as well as bulky substituents, led to the "already weakened" inter- and intramolecular CT interaction and cohesive force. However, when it came to rigid and stiff dianhydride, e.g., BPDA, PI-3' took an obvious advantage over PI-3 in transmittance and solubility, which was possibly owed to the larger molecular chain d-spacing imparted by equatorial, axial C-O. An overall investigation of PI-(1'-5') and PI-(1-5) on aspects of thermal, mechanical, morphological, soluble and optical performance values was carried out, and the conformation effects of HBPA isomers on the properties of two series of polyimides were discussed in detail.
