Unexpected differences between planar and column liquid chromatographic retention of 1-acenaphthenol enantiomers controlled by supramolecular interactions involving ß-cyclodextrin at subambient temperatures.

We report the results of experimental work focusing on host-guest supramolecular complex creation between macrocyclic compound (ß-cyclodextrin) and 1-acenaphthenol enantiomers (racemic mixture) in liquid phase composed of 35% acetonitrile in water (v/v) at different temperatures ranging from 0 to 90 °C. Experimental setup involved several analytical protocols based on classical non-forced flow planar chromatography (RP-18 TLC plates), micro-TLC (RP-18 W HPTLC plates), column chromatography (HPLC with C-18 and C-30 stationary phases), as well as UV-Vis spectrophotometry and optical microscopy. It has been found that under various planar chromatographic conditions (stationary plates type, chamber shape and volume, development mode, and saturation) non-typical retention properties (extremely high retention) of 1-acenaphthenol at subambient temperatures can be observed. To our knowledge, reported experimental results are in opposition to currently described retention models based on column chromatographic investigation of host-guest complexes (where in case of strong interaction of given analyte with macrocyclic mobile phases additive, which itself is non strongly retarded by stationary phase-close to the retention of dead volume marker, the retention of target compounds is shortened at low temperatures). To explain this TLC phenomenon that may have in our opinion a number of practical applications, especially for selective high throughput separation involving microchromatographic and/or microfluidic devices as well fractionation and extraction protocols (using, e.g., bar extraction systems), several experiments were conducted focusing on (i) acenaphthenol chromatography under different instrumental conditions, (ii) cyclodextrin retention measured as analyte or mobile phase additive, (iii) plate development time under different mobile phases and temperature settings, (iv) various column chromatographic conditions including C-30 and two C-18 stationary phases, (v) UV-Vis spectrophotometry, and (vi) microscopy inspection of precipitated CD-acenaphthenol crystals. Analysis of collected data has revealed that the most probable reasons for TLC retention behavior of 1-acenaphthenol under ß-cyclodextrin additive conditions can be associated with (i) solubility changes of created host-guest complex, (ii) kinetics of solid complex precipitation, and (iii) differences in analysis time between planar and column chromatography. Because precipitation phenomenon may have a massive impact on analytes quantification involving macrocycles as the mobile phase additives, our previously reported data concerning a number of low-molecular compounds (mainly steroids and non steroidal endocrine disrupting chemicals) using HPLC methodology based on binary mobile phases without and with ß-cyclodextrin and its hydroxypropyl derivative were re-examined and results discussed. Considering these data and the whole data set reported presently, the enhanced model of chromatographic retention driven by host-guest interaction was proposed.

A novel miniaturized extraction capillary for determining gaseous formaldehyde by high-performance liquid chromatography.

A novel miniaturized sample extraction capillary was developed to provide a simple and sensitive method for analyzing gaseous formaldehyde (FA) using conventional high-performance liquid chromatography (HPLC). The extraction capillary was prepared by packing silica gel particles in a stainless steel capillary with a 1.6-mm o.d. Before the gaseous samples were collected, the silica gel particles were impregnated with a derivatizing reagent 2,4-dinitrophenylhydrazine (DNPH) by passing a solution of DNPH through the extraction capillary. FA was derivatized to form the corresponding hydrazone during the active sampling of a gaseous sample, and the derivative was sorbed by the silica gel. The capillary was then directly connected to a six-port valve, and desorption from the capillary and injection into the HPLC were achieved simultaneously by passing a solvent through the capillary. The run-to-run and device-to-device variabilities, as relative standard deviations, were both less than 6.9%. The limit of detection for FA was 2.5 ng/L using a sampling volume of 100 mL, and a sample collection time of 2 min. Acetaldehyde and acetone in a gaseous sample could also be simultaneously extracted and determined using this method. The applicability of the developed method for determining FA in real indoor air samples was confirmed by comparing the results obtained using the proposed method and a conventional sample preparation method. The developed method enables the rapid and simple sample preparation of gaseous FA and gives a good level of sensitivity.

Needle-type extraction device for the purge and trap analysis of 23 volatile organic compounds in tap water.

We developed a rapid determination technique for trace volatile organic compounds (VOCs) in tap water by introducing a novel needle-type extraction device coupled to a purge-and-trap method. To extract a wide range of VOCs, a new extraction needle containing particles of divinylbenzene and activated carbon was developed in this study. During the active sampling of the headspace gas in a glass vial by the extraction needle, pure N2 gas was used for purging the aqueous sample. After the optimization of several experimental parameters, such as the addition of the salt and conditions of dry purging and desorption, the extraction performance of the device and method was evaluated for 23 VOCs that are typically found in tap water samples. The quantification limits of the method were 0.6 µg/L for 1,1-dichloroethylene and less than 0.5 µg/L for other VOCs, with good repeatability being confirmed for all the target compounds. Taking advantage of the excellent recovery of VOCs, the determination of VOCs in real tap water samples was carried out successfully. Because the developed method does not require sample heating and/or cryogenic focusing, simple and rapid analyses can be performed along with satisfactory sensitivity for typical tap water samples.

An abnormal temperature dependence of alkylpyrazines' retention in reversed-phase liquid chromatography.

Retention behaviors of pyrazine and alkylpyrazines on various stationary phases in reversed-phase liquid chromatography were examined. An abnormal temperature effect on the retention of alkylpyrazines with a mobile phase consisting of acetonitrile and water was observed when changing the column temperature. On the other hand, no similar trend was found with a methanol-water mobile phase. For all the columns investigated in this work, the above tendency to the temperature-dependence was consistently observed, suggesting that the abnormal temperature effect on the retention of alkylpyrazines could be mainly induced by an acetonitrile-based mobile phase.

High-temperature separations on a polymer-coated fibrous stationary phase in microcolumn liquid chromatography.

Novel polymer-coated fiber-packed microcolumns in liquid chromatography (LC) have been developed. Typical polymeric materials, such as polydimethylsiloxane and polyethyleneglycol, which are conventional stationary phases of capillary columns in gas chromatography (GC), have been employed as coating materials onto the surface of fine filaments. Packed longitudinally with a bundle of polymer-coated filaments into a stainless-steel capillary of 0.8 mm i.d., 150 mm length, several types of polymer-coated fiber-packed columns were prepared, and the retention behavior of aromatic compounds on these columns has been studied. A good linear relationship was obtained for van't Hoff plots over the temperature range between 0 and 200 °C, clearly indicating an excellent heat-resistant property of these polymer-coated fibrous stationary phases. Taking advantage of the heat-resistant feature of the fibrous stationary phases, the separation of several test mixtures with temperature-programmed elution was studied, where a solvent gradient program was additionally introduced if needed. Separation was also carried out with pure water as the mobile phase using an appropriate temperature program.

Novel fire investigation technique using needle extraction in gas chromatography.

A novel fire investigation technique using a needle extraction device was studied. Using a polymer particle-packed needle device, air samples containing volatile organic compounds (VOCs) generated from fire accelerants, gasoline and kerosene were extracted effectively, and subsequent gas chromatographic (GC) analyses were successfully carried out. Carpet and wood samples were spiked with gasoline and kerosene, followed by monitoring of the time-variation profiles of emitted VOCs up to 48 h. The fire accelerants were also measured for combusted carpet and wood samples, and the applicability of the proposed method to fire investigations was confirmed. Even at 48 h after spiking, groups of characteristic compounds were clearly observed in the air environments near the combusted sample. This method was further applied to the determination of VOCs in simulated fires, strongly suggesting the applicability of the developed method to real fire investigations.

Retention behavior on aminoethyl-modified poly(p-phenylene terephthalamide) fiber stationary phases in gas chromatography.

Surface derivatization of Kevlar, poly(p-phenylene terephthalamide), fiber has been studied along with the evaluation of the surface characteristics of the chemically-modified fiber as the stationary phase in packed-capillary gas chromatography (GC). Several experimental parameters in the derivatization reaction have been optimized, and the retention behavior of the surface-derivatized fibrous stationary phase has been investigated using various standard solutes, such as alkanes, alcohols and alkylbenzenes. By introducing aminoethyl functional groups onto the surface of the fibrous material, a specific selectivity for polar solutes has been observed.

Rapid temperature-programmed separation and retention prediction on a novel packed-capillary column in gas chromatography.

Novel packed-capillary columns for gas chromatography were developed with a thin-wall stainless-steel capillary of 1.0 mm i.d.; and rapid temperature-programmed separations have been carried out after a basic evaluation concerning the compatibility of these columns to the temperature program. With a numerical integration method, the retention of several test analytes during temperature-programmed elution was successfully estimated. In order to confirm the suitability of the packed-capillary columns to relatively fast temperature programming up to 40 degrees C/min, theoretically predicted retention data were compared with that actually measured. The results suggested a good separation performance of the newly developed packed-capillary columns as a particle-packed column conventionally used. Also, the compatibility to a rapid temperature-programmed operation was quite satisfactory for almost all of the separations currently done in typical analytical laboratories.

Determination of volatile organic compounds for a systematic evaluation of third-hand smoking.

Third-hand smoking was quantitatively evaluated with a polymer-packed sample preparation needle and subsequent gas chromatography-mass spectroscopy analysis. The extraction needle was prepared with polymeric particles as the extraction medium, and successful extraction of typical gaseous volatile organic compounds (VOCs) was accomplished with the extraction needle. For an evaluation of this new cigarette hazard, several types of clothing fabrics were exposed to sidestream smoke, and the smoking-related VOCs evaporated from the fabrics to the environmental air were preconcentrated with the extraction needle. Smoking-related VOCs in smokers' breath were also measured using the extraction needle, and the effect of the breath VOCs on third-hand smoking pollution was evaluated. The results demonstrated that a trace amount of smoking-related VOCs was successfully determined by the proposed method. The adsorption and desorption behaviors of smoking-related VOCs were clearly different for each fabric material, and the time variations of these VOCs concentrations were quantitatively evaluated. The VOCs in the smokers' breath were clearly higher than that of nonsmokers'; however, the results suggested that no significant effect of the smokers' breath on the potential pollution occurred in the typical life space. The method was further applied to the determination of the actual third-hand smoking pollution in an automobile, and a future possibility of the proposed method to the analysis of trace amounts of VOCs in environmental air samples was suggested.

Breath acetone analysis with miniaturized sample preparation device: in-needle preconcentration and subsequent determination by gas chromatography-mass spectroscopy.

A new approach to the determination of human breath acetone with particle-packed sample preparation needle was developed. The extraction needle was packed with a copolymer of methacrylic acid and ethylene glycol dimethacrylate as the extraction medium. For the analysis of breath sample, exhaled breath was collected in a sampling bag, and 50 mL of the breath sample was extracted with the needle-type sample preparation device followed by analysis using gas chromatography-mass spectrometry (GC-MS). After the optimization of several basic extraction conditions for standard acetone samples, breath acetone concentration taken from controlled type-2 diabetic patients was determined. Furthermore, time variations of breath and urine acetone of four healthy individuals under fasting conditions were measured. Urine sample was collected in glass vial, and urine acetone concentration was also determined with the extraction needle by analyzing the corresponding headspace gas. The results demonstrated that the particle-packed extraction needle showed an excellent extraction performance for acetone in both breath and urine headspace samples, and that there is a clear correlation between the concentration of breath acetone and HbA1c level of controlled type-2 diabetic patients. The breath acetone level in controlled diabetic patients was in the range between 0.19 and 0.66 ppmv, where its concentration in medically untreated type-2 patient was 0.92 and 1.20 ppmv. The breath acetone concentration in healthy male was increased to 5.66 ppmv under the 24 h of fasting test, and a high correlation between the breath and urine acetone concentration was also observed. On the basis of the above results, the potential applications of the proposed method to the diagnosis of diabetes and/or ketoacidosis were suggested.

Development of novel fiber-packed needle interface for off-line reversed-phase liquid chromatography-capillary gas chromatography.

For two-dimensional reversed-phase liquid chromatography-gas chromatography (2D RPLC-GC), a specially-designed needle packed with a polymer-coated fibrous stationary phase was introduced as a novel interface. The bundle of synthetic fibers coated with polydimethylsiloxane (PDMS) was packed into the head section of the needle, and served as the extraction medium. Using the post-column dilution of the LC eluent by water and subsequent extraction with the needle interface, the analyte was successfully concentrated to the PDMS phase on the fibrous support in the needle. The concentrated analytes were directly injected to GC system by inserting the needle to a heated GC injector. 2D separations of aliphatic and aromatic hydrocarbons, and also kerosene-extract were performed with the off-line RPLC-GC system interfaced by the needle extractor. The results suggested that the fiber-packed needle interface could be one of the simple and effective approaches to develop an on-line coupled LC-GC system.

Rapid determination of ethylene oxide with fiber-packed sample preparation needle.

Fiber-packed sample preparation device was applied to the simultaneous derivatization/preconcentration of ethylene oxide (EO) in air samples. The polymer-coated filaments were packed longitudinally into the needle, and hydrogen bromide (HBr) was loaded onto the filaments in the preconditioning process. Simultaneous derivatization with HBr in the needle was made during the sampling process of the gaseous EO, and the corresponding derivatized analyte, 2-bromoethanol, was desorbed by passing a small amount of methanol through the extraction needle in the heated gas chromatograph (GC) injector. The basic extraction/desorption parameters for EO have been evaluated. The limit of detection (LOD), limit of quantification (LOQ) and the relative standard deviation (RSD) of run-to-run repeatability were 1.8 ng/L, 5.4 ng/L and less than 4%, respectively, with an extraction time of about 10 min. Satisfactory storage performance for three days at room temperature was also confirmed.

Modeling of retention of adrenoreceptor agonists and antagonists on polar stationary phases in hydrophilic interaction chromatography: a review.

Retention prediction models for reversed-phase liquid chromatography (RPLC) have been extensively studied owing to the fact that RPLC remains the most widely used chromatographic technique especially in the field of pharmaceutical and biomedical analyses. However, RPLC is not always the method of choice for the analysis of some compounds that have high polarity. Hydrophilic interaction chromatography (HILIC) has been gaining interest in the last few years as an alternative option to RPLC for the analysis of polar and hydrophilic analytes. HILIC is a variant of normal-phase liquid chromatography, but utilizes water in a water-miscible organic solvent as the eluent in conjunction with a hydrophilic stationary phase. The present review aims to summarize recent contributions on the development of retention prediction models for a group of basic analytes, namely, the adrenoreceptor agonists and antagonists, on different polar stationary phases. The use of multiple linear regression and artificial neural networks in model building is highlighted.

Fiber-packed needle-type sample preparation device designed for gas chromatographic analysis.

A miniaturized sample preparation technique that uses a fine-fiber-packed needle as the extraction medium is reviewed, especially in relation to its application to the analysis of volatile organic compounds by gas chromatography. When the needle was packed longitudinally with a bundle of fine filaments (12 microm o.d.) which were also surface-coated with polymeric materials, successful sample preconcentration was obtained. Improved sensitivity was also established by introducing simultaneous derivatization reactions into the extraction process in the fiber-packed needle. The storage performance of the needle clearly demonstrated the potential of the technique for typical on-site sampling during environmental analysis. In this short review, the fiber-packed extraction needle developed by the authors is summarized along with applications that use the fiber-packed needle as a miniaturized extraction device.

Effects of alcohols on CE enantioseparation of basic drugs with native gamma-CD as chiral selector.

The effects of alcohol on the CE enantioseparation of selected basic drugs with gamma-CD as the chiral selector was investigated. The enantioseparation behavior of the analytes with gamma-CD in the absence and presence of different alcohols specifically methanol, ethanol, 2-propanol (IPA), and 2-methyl-2-propanol (TBA), the relationship of enantiomeric resolution (R(s)) values with either hydrophobicity or bulkiness of the alcohols, as well as the effect of these alcohols on interaction of the analytes with gamma-CD were studied. Results showed that hydrophobicity and/or bulkiness of alcohols have an influence on the enantioresolution of most of the analytes based on the relatively high correlation coefficients (R) obtained between R(s) versus log P and between R(s) versus ovality (i.e., parameter to indicate bulkiness of a molecule). Comparison of the values of the average binding constants obtained for each enantiomeric pair in the presence and absence of 5% IPA showed that alcohols can increase, decrease, or give a minimal effect on the analyte-gamma-CD interaction depending on the analyte. Furthermore, the significant enhancement in the enantioresolution of both propranolol and pindolol in the presence of either IPA or TBA led to the baseline enantioresolution of both drugs using 35 mM gamma-CD.

Multiple linear regression and artificial neural network retention prediction models for ginsenosides on a polyamine-bonded stationary phase in hydrophilic interaction chromatography.

The development of retention prediction models for the seven ginsenosides Rf, Rg1, Rd, Re, Rc, Rb2, and Rb1 on a polyamine-bonded stationary phase in hydrophilic interaction chromatography (HILIC) is presented. The models were derived using multiple linear regression (MLR) and artificial neural network (ANN) using the logarithm of the retention factor (log k) as the dependent variable for four temperature conditions (0, 10, 25, and 40 degrees C). Using stepwise MLR, the retention of the analytes in all the temperature conditions was satisfactorily described by a two-predictor model wherein the predictors were the percentage of ACN (%ACN) in the mobile phase and local dipole index (LDI) of the compounds. These predictors account for the contribution of the solute-related variable (LDI) and the influence of the mobile phase composition (%ACN) on the retention behavior of the ginsenosides. A comparison of the models derived from both MLR and ANN revealed that the trained ANNs showed better predictive abilities than the MLR models in all temperature conditions as demonstrated by their higher R(2) values for both training and test sets and lower average percentage deviation of the predicted log k from the observed log k of the test compounds. The ANN models also showed excellent performance when applied to the prediction of the seven ginsenosides in different sample matrices.

Development of retention prediction models for adrenoreceptor agonists and antagonists on a polyvinyl alcohol-bonded stationary phase in hydrophilic interaction chromatography.

Retention prediction models based on multiple linear regression (MLR) and artificial neural network (ANN) for adrenoreceptor agonists and antagonists chromatographed on a polyvinyl alcohol-bonded stationary phase under hydrophilic interaction chromatography were described. The models showed the combined effects of solute structure and mobile phase composition on the retention behavior of the analytes. Using stepwise MLR, the retentions of the studied compounds were satisfactorily described by a five-predictor model; the predictors being the %ACN, the logarithm of the partition coefficient (log D), the number of hydrogen bond donors (HBD), the desolvation energy for octanol (FOct), and the total absolute atomic charge (TAAC). The inclusion of the solute-related descriptors suggested that hydrophilic interactions such as hydrogen bonding and also ionic interactions are possible mechanisms by which analytes are retained on the studied system. ANN prediction models were also derived using the predictors derived from MLR as inputs and log k as outputs. The best network architectures were found to be 5-3-1 for the datasets at pH 3.0 and 4.0, and 5-4-1 for the dataset at pH 5.0. The optimized ANNs showed better predictive properties than the MLR models for both training and test sets under all pH conditions.

Retention prediction modeling of ginsenosides on a polyvinyl alcohol-bonded stationary phase at subambient temperatures using multiple linear regression and artificial neural network.

The development of retention prediction models for the seven ginsenosides (Rf, Rg1, Rd, Re, Rc, Rb2 and Rb1) on a polyvinyl alcohol (PVA)-bonded stationary phase at subambient temperatures is presented. The models were derived using multiple linear regression (MLR) and artificial neural network (ANN) using the logarithm of the retention factor (log k) as the dependent variable. Using stepwise MLR, the retention of the analytes under all temperature conditions was satisfactorily described by a three-predictor model; the predictors being the percentage of acetonitrile (%MeCN) in the mobile phase, the number of hydrogen bond donors (HBD) and the ovality (Ov) of the compounds. These predictors account for the contribution of the solute-related variables (HBD and Ov) and the influence of the mobile phase composition (%MeCN) on the retention behavior of the ginsenosides. The MLR models produced adequate fits, as proven by the high calibration R2 values of the predicted versus the observed log k (> 0.95) and good predictive properties, as indicated by the high cross-validated q2 (> 0.93) and high R2 (> 0.95) values obtained from the test set. ANN modeling was also conducted using the predictors that were derived from MLR as inputs and log k as the output. A comparison of the models derived from both MLR and ANN revealed that the trained ANNs showed better predictive abilities than the MLR models in all temperature conditions as demonstrated by their higher R2 values for both training and test sets and lower average percentage deviation of the predicted log k from the observed log k of the test compounds. The ANN models also showed excellent performance when applied to the prediction of the seven ginsenosides in different sample matrices.

Fast separation and quantification of C60 and C70 fullerenes using thermostated micro thin-layer chromatography.

Thermostated micro planar chromatography was applied for systematic separation studies of C60 and C70 fullerenes using n-alkanes as mobile phases on TLC and HPTLC plates coated with polyamide, silica gel, aluminum oxide as well as two types of octadecylsilica (C18) sorbents. Retention data were collected at constant temperature at 20 degrees C (+/-0.05 degrees C) using an unsaturated chamber mode with an eluent, such as n-pentane, n-hexane and n-heptane. The separation results under both saturated and unsaturated chamber modes for selected mobile/stationary phases were also examined, and several parameters, including separation factor (alpha) and resolution (R(S)), were compared with data obtained with high-performance liquid chromatography conditions. Interestingly, C60/C70 fullerenes separation performed on HPTLC plates with a developing distance of 45 mm was better for those observed on a 25 cm length analytical HPLC column under similar conditions to that on carbon coverage of the stationary phase, n-hexane as the mobile phase and separation temperature (R(S) = 1.84 and 1.68 for HPTLC, and HPLC, respectively). Moreover the advantage of the planar chromatographic separation of fullerenes studied is a short elution time of less than 6 min. Furthermore, the reported separation protocol shows a capability for the evaluation of fullerenes quantity in commercial samples.