Marginal fit of three different nanocomposite inlays fabricated with computer-aided design/computer-aided manufacturing (CAD/CAM) technology: a comparative study.

BACKGROUND: This study aimed to compare and evaluate the marginal fit of nanocomposite computer-aided design/computer-aided manufacturing (CAD/CAM) inlays. Three types of nanocomposite CAD/CAM blocks (HASEM, VITA Enamic, and Lava Ultimate) were used as materials. METHODS: Class II disto-occlusal inlay restorations were prepared on a typodont mandibular right first molar using diamond rotary instruments. The inlays were fabricated using CAD/CAM technology and evaluated using the silicone replica technique to measure marginal gaps at five locations on each inlay. The data were analyzed by two-way analysis of variance and Tukey post hoc tests ( α=0.05). RESULTS: There were no significant differences in the marginal gaps based on the type of nanocomposite CAD/CAM inlay used (p=0.209). However, there was a significant difference in the marginal gaps between the measurement regions. The gingival region consistently exhibited a larger marginal gap than the axial and occlusal regions (p<0.001). CONCLUSION: Within the limitations of this in vitro study, the measurement location significantly influenced the marginal fit of class II disto-occlusal inlay restorations. However, there were no significant differences in the marginal gaps among the different types of CAD/CAM blocks. Furthermore, the overall mean marginal fits of the class II disto-occlusal inlay restorations made with the three types of nanocomposite CAD/CAM blocks were within the clinically acceptable range.

Neonatal sepsis-causing bacterial pathogens and outcome of trends of their antimicrobial susceptibility a 20-year period at a neonatal intensive care unit.

BACKGROUND: Due to increases in the number of infants born with younger gestational age (GA) and lower birth weight, the incidence of neonatal sepsis is increasing. PURPOSE: We investigated the changes in the prevalence of bacterial pathogens, their antimicrobial susceptibility, and sepsis-related mortality during 20 years at a neonatal intensive care unit. METHODS: The study period was divided into two 10-year phases (1998-2007 vs. 2008-2017). Medical records were reviewed to gather data on demographics, causative microbial pathogens, incidence of multidrug-resistant organisms, antimicrobial susceptibility, and rates of sepsis-related mortality. RESULTS: In both study phases, the most common pathogens for neonatal sepsis were coagulase-negative Staphylococcus (CoNS) (28.6%) and Enterobacter cloacae (16.1%) for early-onset sepsis (EOS, ≤72 hours after birth) and CoNS (54.7%) and Staphylococcus aureus (12.9%) for late-onset sepsis (LOS, >72 hours after birth). CoNS and S. aureus showed 100% sensitivity to vancomycin in both phases. The susceptibility of S. aureus to oxacillin increased from 19.2% to 57.9% in phase II than phase I. K. pneumonia and E. cloacae showed increases in its susceptibility to gentamicin, cefotaxime and ceftriaxone in phase II than phase I. In both phases, the most common pathogens that caused sepsis-related death were K. pneumoniae (18.2%) and Pseudomonas aeruginosa (13.6%). Sepsis-related mortality rate was higher in infants with GA <37 weeks than those with GA over 37 weeks (P=0.016). In addition, the mortality rate of neonatal sepsis caused by gram-negative bacteria was significantly higher than that caused by gram-positive bacteria (P<0.001). CONCLUSIONS: CoNS was the most common pathogen for EOS and LOS. While we found significant changes in antimicrobial sensitivities over time. GA below 37 weeks and gram-negative organisms are associated with mortality rate.

Modified far lateral endoscopic transforaminal lumbar interbody fusion using a biportal endoscopic approach: technical report and preliminary results.

BACKGROUND: Endoscopic transforaminal lumbar interbody fusion (TLIF) has the disadvantage of the small cage size and by consequence risk for cage subsidence. We succeeded to insert a large oblique lumbar interbody fusion (OLIF) cage during biportal endoscopic TLIF. METHODS: Unilateral total facetectomy was performed to expose the exiting and traversing nerve roots. The distance between the exiting and traversing nerve roots was measured before OLIF cage insertion. We inserted an OLIF cage instead of a TLIF cage. CONCLUSION: We successfully performed modified far lateral biportal endoscopic TLIF using large OLIF cages. Modified far lateral biportal endoscopic TLIF is usually suitable for the L4-5 and L5-S1 levels.

Monocyte Chemoattractant Protein (MCP)-1 in Rotavirus-Associated White Matter Injury in Newborns.

Recent reports have suggested an association between rotavirus infection and a distinctive pattern of white matter injury (WMI) in neonates with seizures; however, the connection between the two is not fully understood. To evaluate the underlying mechanism, we profiled and compared eight cytokines (IL [interleukin]-1ß, IL-6, IL-8, IL-10, IFN-γ [interferon-γ ], MCP-1 [monocyte chemoattractant protein-1], MIP-1ß [macrophage inflammatory protein-1ß], and TNF-α [tumor necrosis factor-α]) in the cerebrospinal fluid (CSF) of 33 neonates with seizures who had no other well-known causes of seizures and 13 control patients (rotavirus-induced gastroenteritis but without seizures). Among the 33 neonates with seizures, 9 showed WMI and all were infected with rotavirus (R + W + ). Among the 24 patients without WMI, 11 were infected with rotavirus (R + W - ) and 13 were not (R - W - ).Only MCP-1 and MIP-1ß were different between the groups. MCP-1 was increased in R+ W+ compared with R + W- (p < 0.01), R - W- (p < 0.01), and control (p = 0.03) patients. MIP-1ß was decreased in R + W+ compared with R - W- (p < 0.01) and control (p < 0.01), but not R + W- (p = 0.23) patients. MCP-1 and MIP-1ß are C-C chemokines that recruit immune cells to the site of inflammation. Our pilot study suggests MCP-1-mediated monocyte recruitment may be linked with this complication caused by rotavirus.

Influence of abutment materials on the implant-abutment joint stability in internal conical connection type implant systems.

PURPOSE: This study evaluated the influence of abutment materials on the stability of the implant-abutment joint in internal conical connection type implant systems. MATERIALS AND METHODS: Internal conical connection type implants, cement-retained abutments, and tungsten carbide-coated abutment screws were used. The abutments were fabricated with commercially pure grade 3 titanium (group T3), commercially pure grade 4 titanium (group T4), or Ti-6Al-4V (group TA) (n=5, each). In order to assess the amount of settlement after abutment fixation, a 30-Ncm tightening torque was applied, then the change in length before and after tightening the abutment screw was measured, and the preload exerted was recorded. The compressive bending strength was measured under the ISO14801 conditions. In order to determine whether there were significant changes in settlement, preload, and compressive bending strength before and after abutment fixation depending on abutment materials, one-way ANOVA and Tukey's HSD post-hoc test was performed. RESULTS: Group TA exhibited the smallest mean change in the combined length of the implant and abutment before and after fixation, and no difference was observed between groups T3 and T4 (P>.05). Group TA exhibited the highest preload and compressive bending strength values, followed by T4, then T3 (P<.001). CONCLUSION: The abutment material can influence the stability of the interface in internal conical connection type implant systems. The strength of the abutment material was inversely correlated with settlement, and positively correlated with compressive bending strength. Preload was inversely proportional to the frictional coefficient of the abutment material.

Modified polymethylmethacrylate cervical plate and screw augmentation technique for intraoperative screw loosening.

STUDY DESIGN: Case report including technical note. OBJECTIVE: We describe 2 cases of intraoperative cervical plate screw loosening treated by modified screw augmentation using polymethylmethacrylate (PMMA), which used the anchoring effect of hardened PMMA. SUMMARY OF BACKGROUND DATA: Intraoperative screw loosening during cervical plating is not rare. PMMA augmentation for a damaged pilot hole is one of the rescue techniques in such a case. METHODS: A 52-year-old man who had complained of posterior neck pain and left arm pain underwent anterior cervical discectomy and plating with cage at the level of C6/7. An 82-year-old woman presenting bilateral arm weakness and radiating pain after trauma underwent the same operation at C5/6/7. Both of them showed intraoperative screw loosening, which was rectified by modified screw augmentation with PMMA. The difference between this technique and conventional PMMA augmentation is the anchoring effect of hardened PMMA. This technique does not need a new screw trajectory, but uses the existing dead space around the loosened screw. After filling the dead space with about 0.5 mL of PMMA, we inserted a small-sized screw. Once the PMMA hardened, we could remove the small screw and insert a thicker screw along the existing screw thread to increase the screws' pullout strength and achieve rigid fixation of plate. RESULTS: The condition of both patients improved without any instrument failure. In the first case, the visual analog scale and Neck Disability Index improved from 10 to 1 and from 64% to 2%, respectively. In the other patient, the visual analog scale and Neck Disability Index improved from 10 to 4 and from 66% to 40%, respectively. X-ray at 6-month follow-up showed no evidence of screw loosening. CONCLUSIONS: This modified PMMA augmentation is a simple, safe, and promising surgical technique to correct intraoperative screw loosening during cervical plating.

Hepatic macrosteatosis: predicting appropriateness of liver donation by using MR imaging--correlation with histopathologic findings.

PURPOSE: To retrospectively evaluate the diagnostic performance of magnetic resonance (MR) imaging in predicting the appropriateness of liver donation in potential living liver donors by using histopathologic results as the reference standard. MATERIALS AND METHODS: This study was approved by institutional review board; all patients gave informed consent for the use of MR data for future research. Fifty-seven potential liver donors (40 male, 17 female; age range, 17-57 years; mean age, 32 years) underwent dual-echo 1.5-T MR imaging. Two radiologists qualitatively graded each MR image, with consensus for disagreements. Livers were assigned one of three degrees of hepatic steatosis on the basis of changes in hepatic signal intensity (SI) between in-phase and opposed-phase images. For quantitative analysis, a third radiologist calculated mean hepatic and mean splenic SI by averaging 25 hepatic regions of interest and three splenic regions of interest. Relative SI decrease (RSID) in the liver on opposed-phase images compared with in-phase images was calculated. Linear regression analysis was used to correlate RSID with the degree of total steatosis, macrosteatosis, and microsteatosis. Diagnostic performance for predicting the appropriateness of liver donation was analyzed. RESULTS: Histologic findings of macrosteatosis resulted in 52 patients being categorized as appropriate donors, with the remaining five being categorized as inappropriate donors. RSID was correlated with total steatosis (r = 0.850). When the RSID criterion for inappropriateness of liver donation was set at 20%, the sensitivity, specificity, and accuracy were 100%, 92.3%, and 93%, respectively. When RSID was used, four livers that had been misclassified as inappropriate for transplantation were found to have microsteatosis of various degrees and a less than moderate degree of macrosteatosis at histologic analysis. Qualitative and quantitative analyses were comparably accurate. CONCLUSION: When an RSID criterion of less than 20% was used, dual-echo MR imaging facilitated the correct prediction of appropriateness of liver donation in 53 of 57 patients.