A wearable, highly stable, strain and bending sensor based on high aspect ratio graphite nanobelts.

A simple and scalable method was developed for the fabrication of wearable strain and bending sensors, based on high aspect ratio (length/thickness ∼10(3)) graphite nanobelt thin films deposited by a modified Langmuir-Blodgett technique onto flexible polymer substrates. The sensing mechanism is based on the changes in contact resistance between individual nanobelts upon substrate deformation. Very high sensor response stability for more than 5000 strain-release cycles and a device power consumption as low as 1 nW were achieved. The device maximum stretchability is limited by the metal electrodes and the polymer substrate; the maximum strain that could be applied to the polymer used in this work was 40%. Bending tests carried out for various radii of curvature demonstrated distinct sensor responses for positive and negative curvatures. The graphite nanobelt thin flexible films were successfully tested for acoustic vibration and heartbeat sensing.

Temporal drift in Raman signal intensity during SERS measurements performed on analytes in liquid solutions.

In this communication, we report one factor that could limit the quantitative analysis by SERS, which has not yet been discussed in the literature. Our results show that SERS experiments performed with the substrate immersed in liquid solutions are subjected to a temporal drift in the Raman signal intensity. Measurements were performed using gold nanoparticle suspensions and gold-covered nanostructured ITO surfaces as SERS substrates, immersed in analyte solutions of crystal violet and 4-mercaptobenzoic acid. Depending on the substrate and the conditions used for measurements, the Raman signal can take between 30 min and several hours to stabilize. This effect, if not taken into account, could have a negative impact on the results of the quantitative chemical analysis by SERS performed in situ in liquid solutions.

Micro-reactors for characterization of nanostructure-based sensors.

Fabrication and testing of micro-reactors for the characterization of nanosensors is presented in this work. The reactors have a small volume (100 µl) and are equipped with gas input/output channels. They were machined from a single piece of kovar in order to avoid leaks in the system due to additional welding. The contact pins were electrically insulated from the body of the reactor using a borosilicate sealing glass and the reactor was hermetically sealed using a lid and an elastomeric o-ring. One of the advantages of the reactor lies in its simple assembly and ease of use with any vacuum/gas system, allowing the connection of more than one device. Moreover, the lid can be modified in order to fit a window for in situ optical characterization. In order to prove its versatility, carbon nanotube-based sensors were tested using this micro-reactor. The devices were fabricated by depositing carbon nanotubes over 1 µm thick gold electrodes patterned onto Si/SiO(2) substrates. The sensors were tested using oxygen and nitrogen atmospheres, in the pressure range between 10(-5) and 10(-1) mbar. The small chamber volume allowed the measurement of fast sensor characteristic times, with the sensors showing good sensitivity towards gas and pressure as well as high reproducibility.

Thermal evaporation furnace with improved configuration for growing nanostructured inorganic materials.

A tubular furnace specifically designed for growing nanostructured materials is presented in this work. The configuration allows an accurate control of evaporation temperature, substrate temperature, total pressure, oxygen partial pressure, volumetric flow and source-substrate distance, with the possibility of performing both downstream and upstream depositions. In order to illustrate the versatility of the equipment, the furnace was used for growing semiconducting oxide nanostructures under different deposition conditions. Highly crystalline indium oxide nanowires with different morphologies were synthesized by evaporating mixtures of indium oxide and graphite powders with different mass ratios at temperatures between 900 °C and 1050 °C. The nanostructured layers were deposited onto oxidized silicon substrates with patterned gold catalyst in the temperature range from 600 °C to 900 °C. Gas sensors based on these nanowires exhibited enhanced sensitivity towards oxygen, with good response and recovery times.

Resistive-switching behavior in polycrystalline CaCu(3)Ti(4)O(12) nanorods.

Highly aligned CaCu(3)Ti(4)O(12) nanorod arrays were grown on Si/SiO(2)/Ti/Pt substrates by radio-frequency sputtering at a low deposition temperature of 300 °C and room temperature. Structural and morphological studies have shown that the nanostructures have a polycrystalline nature and are oriented perpendicular to the substrate. The high density of grain boundaries in the nanorods is responsible for the nonlinear current behavior observed in these arrays. The current-voltage (I-V) characteristics observed in nanorods were attributed to the resistive memory phenomenon. The electrical resistance of microcapacitors composed of CaCu(3)Ti(4)O(12) nanorods could be reversibly switched between two stable resistance states by varying the applied electric field. In order to explain this switching mechanism, a model based on the increase/decrease of electrical conduction controlled by grain boundary polarization has been proposed.