Electrodialysis with Bipolar Membranes for the Generation of NaOH and HCl Solutions from Brines: An Inter-Laboratory Evaluation of Thin and Ultrathin Non-Woven Cloth-Based Ion-Exchange Membranes.

The SEArcularMINE project aims to recover critical raw materials (CRMs) from brines from saltworks, thus facing a CRM shortage within Europe. To promote a fully circular scheme, the project valorises concentrated brines using electrodialysis with bipolar membranes (EDBM) to generate the required amounts of reactants (i.e., acids and bases). Regarding the performances of new non-woven cloth ion-exchange membranes (Suez): (i) an ultra-thin non-woven polyester cloth and (ii) a thin polypropylene cloth acting as the support structures were assessed. Additionally, the anion layer includes a catalyst to promote the water dissociation reaction. The effect of current density (100, 200, and 300 A m-2) on the performance of two combinations of membranes in an inter-laboratory exercise using 2 M NaCl was evaluated. According to statistical analysis ANOVA, there was an agreement on the results obtained in both laboratories. NaOH/HCl solutions up to 0.8 M were generated working at 300 A m-2 using both combinations of membranes. Regarding the performance parameters, stack set-ups incorporating thin polypropylene membranes showed lower specific energy consumption (SEC) and higher specific productivity (SP) than ultra-thin polypropylene ones. Hence, for ultra-thin polypropylene membranes, SEC was reported to be between 2.18 and 1.69 kWh kg-1NaOH and SP between 974 and 314 kg m-2 y-1.

Microstrip-Fed 3D-Printed H-Sectorial Horn Phased Array.

A 3D-printed phased array consisting of four H-Sectorial horn antennas of 200 g weight with an ultra-wideband rectangular-waveguide-to-microstrip-line transition operating over the whole LMDS and K bands (24.25-29.5 GHz) is presented. The transition is based on exciting three overlapped transversal patches that radiate into the waveguide. The transition provides very low insertion losses, ranging from 0.30 dB to 0.67 dB over the whole band of operation (23.5-30.4 GHz). The measured fractional bandwidth of the phased array including the transition was 20.8% (24.75-30.3 GHz). The antenna was measured for six different scanning angles corresponding to six different progressive phases α, ranging from 0° to 140° at the central frequency band of operation of 26.5 GHz. The maximum gain was found in the broadside direction α = 0°, with 15.2 dB and efficiency η = 78.5%, while the minimum was found for α = 140°, with 13.7 dB and η = 91.2%.

On the Wireless Microwave Sensing of Bacterial Membrane Potential in Microfluidic-Actuated Platforms.

The investigation of the electromagnetic properties of biological particles in microfluidic platforms may enable microwave wireless monitoring and interaction with the functional activity of microorganisms. Of high relevance are the action and membrane potentials as they are some of the most important parameters of living cells. In particular, the complex mechanisms of a cell's action potential are comparable to the dynamics of bacterial membranes, and consequently focusing on the latter provides a simplified framework for advancing the current techniques and knowledge of general bacterial dynamics. In this work, we provide a theoretical analysis and experimental results on the microwave detection of microorganisms within a microfluidic-based platform for sensing the membrane potential of bacteria. The results further advance the state of microwave bacteria sensing and microfluidic control and their implications for measuring and interacting with cells and their membrane potentials, which is of great importance for developing new biotechnologically engineered systems and solutions.

Linear and Circular UWB Millimeter-Wave and Terahertz Monostatic Near-Field Synthetic Aperture Imaging.

Millimeter-wave and terahertz frequencies offer unique characteristics to simultaneously obtain good spatial resolution and penetrability. In this paper, a robust near-field monostatic focusing technique is presented and successfully applied for the internal imaging of different penetrable geometries. These geometries and environments are related to the growing need to furnish new vehicles with radar-sensing devices that can visualize their surroundings in a clear and robust way. Sub-millimeter-wave radar sensing offers enhanced capabilities in providing information with a high level of accuracy and quality, even under adverse weather conditions. The aim of this paper was to research the capability of this radar system for imaging purposes from an analytical and experimental point of view. Two sets of measurements, using reference targets, were performed in the W band at 100 GHz (75 to 110 GHz) and terahertz band at 300 GHz (220 to 330 GHz). The results show spatial resolutions of millimeters in both the range (longitudinal) and the cross-range (transversal) dimensions for the two different imaging geometries in terms of the location of the transmitter and receiver (frontal or lateral views). The imaging quality in terms of spatial accuracy and target material parameter was investigated and optimized.