Environmentally relevant concentrations of aqueous atorvastatin produce alterations in cholesterol biosynthesis and gene expression patterns in Xenopus laevis.

Numerous studies report active pharmaceutical compounds detected in both wastewater effluent and surface waters. Exposure to statin drugs in general, and atorvastatin in particular, is likely to be a concern. We hypothesized that chronic exposure to low concentrations of atorvastatin in water would result in an adverse effect on production of steroids regulating growth and development of the model amphibian Xenopus laevis. The FETAX assay was used to evaluate the effects of a range of doses of atorvastatin on developing embryos. A 60 day metamorphosis assay assessed the effects of aqueous atorvastatin exposure at environmentally concentrations on metamorphosing tadpoles. A 60 day chronic flow-through exposure evaluated the effects of chronic low concentrations of atorvastatin on adults. The purpose of the FETAX assay was to confirm that atorvastatin can reduce circulating cholesterol in X. laevis with a similar manner to that expected in humans. The results of the 60-day flow-through exposure on metamorphosing tadpoles showed significant evidence of altered cholesterol biosynthesis. The dose-dependent increase in cyp19a1 expression also indicated that the steroidogenesis pathway was affected. The RNAseq analysis confirmed that exposure to environmentally relevant concentrations of atorvastatin does cause significant alterations to global transcriptional profiles in a manner consistent with dysregulation of the cholesterol biosynthesis pathway, both through the downregulation of many genes involved in that pathway, but also in the impacts to other, related pathways. The qPCR data for both adult males and adult females indicated only slight changes in expression with the exception that hmgcr was significantly downregulated in males, and cyp3a4 expression was significantly downregulated in females. The data we present here indicated that chronic exposure to environmentally relevant concentrations of atorvastatin does have the potential to impact early life stage frogs, particularly by altering expression of genes involved in critical molecular pathways.

Solution-processable polytriazoles from spirocyclic monomers for membrane-based hydrocarbon separations.

The thermal distillation of crude oil mixtures is an energy-intensive process, accounting for nearly 1% of global energy consumption. Membrane-based separations are an appealing alternative or tandem process to distillation due to intrinsic energy efficiency advantages. We developed a family of spirocyclic polytriazoles from structurally diverse monomers for membrane applications. The resulting polymers were prepared by a convenient step-growth method using copper-catalysed azide-alkyne cycloaddition, providing very fast reaction rates, high molecular weights and solubilities in common organic solvents and non-interconnected microporosity. Fractionation of whole Arabian light crude oil and atmospheric tower bottom feeds using these materials enriched the low-boiling-point components and removed trace heteroatom and metal impurities (comparable performance with the lighter feed as the commercial polyimide, Matrimid), demonstrating opportunities to reduce the energy cost of crude oil distillation with tandem membrane processes. Membrane-based molecular separation under these demanding conditions is made possible by high thermal stability and a moderate level of dynamic chain mobility, leading to transient interconnections between micropores, as revealed by the calculations of static and swollen pore structures.

Data-driven predictions of complex organic mixture permeation in polymer membranes.

Membrane-based organic solvent separations are rapidly emerging as a promising class of technologies for enhancing the energy efficiency of existing separation and purification systems. Polymeric membranes have shown promise in the fractionation or splitting of complex mixtures of organic molecules such as crude oil. Determining the separation performance of a polymer membrane when challenged with a complex mixture has thus far occurred in an ad hoc manner, and methods to predict the performance based on mixture composition and polymer chemistry are unavailable. Here, we combine physics-informed machine learning algorithms (ML) and mass transport simulations to create an integrated predictive model for the separation of complex mixtures containing up to 400 components via any arbitrary linear polymer membrane. We experimentally demonstrate the effectiveness of the model by predicting the separation of two crude oils within 6-7% of the measurements. Integration of ML predictors of diffusion and sorption properties of molecules with transport simulators enables for the rapid screening of polymer membranes prior to physical experimentation for the separation of complex liquid mixtures.

Seasonal and diurnal variations of Kelvin-Helmholtz Instability at terrestrial magnetopause.

Kelvin-Helmholtz Instability is ubiquitous at Earth's magnetopause and plays an important role in plasma entry into the magnetosphere during northward interplanetary magnetic fields. Here, using one solar cycle of data from NASA THEMIS (Time History of Events and Macro scale Interactions during Substorms) and MMS (Magnetospheric Multiscale) missions, we found that KHI occurrence rates show seasonal and diurnal variations with the rate being high near the equinoxes and low near the solstices. The instability depends directly on the Earth's dipole tilt angle. The tilt toward or away from the Sun explains most of the seasonal and diurnal variations, while the tilt in the plane perpendicular to the Earth-Sun line explains the difference between the equinoxes. The results reveal the critical role of dipole tilt in modulating KHI across the magnetopause as a function of time, highlighting the importance of Sun-Earth geometry for solar wind-magnetosphere interaction and for space weather.

Hydrophobic polyamide nanofilms provide rapid transport for crude oil separation.

Hydrocarbon separation relies on energy-intensive distillation. Membrane technology can offer an energy-efficient alternative but requires selective differentiation of crude oil molecules with rapid liquid transport. We synthesized multiblock oligomer amines, which comprised a central amine segment with two hydrophobic oligomer blocks, and used them to fabricate hydrophobic polyamide nanofilms by interfacial polymerization from self-assembled vesicles. These polyamide nanofilms provide transport of hydrophobic liquids more than 100 times faster than that of conventional hydrophilic counterparts. In the fractionation of light crude oil, manipulation of the film thickness down to ~10 nanometers achieves permeance one order of magnitude higher than that of current state-of-the-art hydrophobic membranes while retaining comparable size- and class-based separation. This high permeance can markedly reduce plant footprint, which expands the potential for using membranes made of ultrathin nanofilms in crude oil fractionation.

Aqueously altered igneous rocks sampled on the floor of Jezero crater, Mars.

The Perseverance rover landed in Jezero crater, Mars, to investigate ancient lake and river deposits. We report observations of the crater floor, below the crater's sedimentary delta, finding that the floor consists of igneous rocks altered by water. The lowest exposed unit, informally named Séítah, is a coarsely crystalline olivine-rich rock, which accumulated at the base of a magma body. Magnesium-iron carbonates along grain boundaries indicate reactions with carbon dioxide-rich water under water-poor conditions. Overlying Séítah is a unit informally named Máaz, which we interpret as lava flows or the chemical complement to Séítah in a layered igneous body. Voids in these rocks contain sulfates and perchlorates, likely introduced by later near-surface brine evaporation. Core samples of these rocks have been stored aboard Perseverance for potential return to Earth.

An olivine cumulate outcrop on the floor of Jezero crater, Mars.

The geological units on the floor of Jezero crater, Mars, are part of a wider regional stratigraphy of olivine-rich rocks, which extends well beyond the crater. We investigated the petrology of olivine and carbonate-bearing rocks of the Séítah formation in the floor of Jezero. Using multispectral images and x-ray fluorescence data, acquired by the Perseverance rover, we performed a petrographic analysis of the Bastide and Brac outcrops within this unit. We found that these outcrops are composed of igneous rock, moderately altered by aqueous fluid. The igneous rocks are mainly made of coarse-grained olivine, similar to some martian meteorites. We interpret them as an olivine cumulate, formed by settling and enrichment of olivine through multistage cooling of a thick magma body.

Homogeneity assessment of the SuperCam calibration targets onboard rover perseverance.

The SuperCam instrument, onboard the Perseverance rover (Mars 2020 mission) is designed to perform remote analysis on the Martian surface employing several spectroscopic techniques such as Laser Induced Breakdown Spectroscopy (LIBS), Time-Resolved Raman (TRR), Time-Resolved Fluorescence (TRF) and Visible and Infrared (VISIR) reflectance. In addition, SuperCam also acquires high-resolution images using a color remote micro-imager (RMI) as well as sounds with its microphone. SuperCam has three main subsystems, the Mast Unit (MU) where the laser for chemical analysis and collection optics are housed, the Body Unit (BU) where the different spectrometers are located inside the rover, and the SuperCam Calibration Target (SCCT) located on the rover's deck to facilitate calibration tests at similar ambient conditions as the analyzed samples. To perform adequate calibrations on Mars, the 22 mineral samples included in the complex SCCT assembly must have a very homogeneous distribution of major and minor elements. The analysis and verification of such homogeneity for the 5-6 replicates of the samples included in the SCCT has been the aim of this work. To verify the physic-chemical homogeneity of the calibration targets, micro Energy Dispersive X-ray Fluorescence (EDXRF) imaging was first used on the whole surface of the targets, then the relative abundances of the detected elements were computed on 20 randomly distributed areas of 100 × 100 µm. For those targets showing a positive Raman response, micro-Raman spectroscopy imaging was performed on the whole surface of the targets at a resolution of 100 × 100 µm. The %RSD values (percent of relative standard deviation of mean values) for the major elements measured with EDXRF were compared with similar values obtained by two independent LIBS set-ups at spot sizes of 300 µm in diameter. The statistical analysis showed which elements were homogeneously distributed in the 22 mineral targets of the SCCT, providing their uncertainty values for further calibration. Moreover, nine of the 22 targets showed a good Raman response and their mineral distributions were also studied. Those targets can be also used for calibration purposes of the Raman part of SuperCam using the wavenumbers of their main Raman bands proposed in this work.

Twin-free, directly synthesized MFI nanosheets with improved thickness uniformity and their use in membrane fabrication.

Zeolite nanosheets can be used for the fabrication of low-defect-density, thin, and oriented zeolite separation membranes. However, methods for manipulating their morphology are limited, hindering progress toward improved performance. We report the direct synthesis (i.e., without using exfoliation, etching, or other top-down processing) of thin, flat MFI nanosheets and demonstrate their use as high-performance membranes for xylene isomer separations. Our MFI nanosheets were synthesized using nanosheet fragments as seeds instead of the previously used MFI nanoparticles. The obtained MFI nanosheets exhibit improved thickness uniformity and are free of rotational and MEL intergrowths as shown by transmission electron microscopy (TEM) imaging. The nanosheets can form well-packed nanosheet coatings. Upon gel-free secondary growth, the obtained zeolite MFI membranes show high separation performance for xylene isomers at elevated temperature (e.g., p-xylene flux up to 1.5 × 10-3 mol m-2 s-1 and p-/o-xylene separation factor of ~600 at 250°C).

Determining EMIC Wave Vector Properties Through Multi-Point Measurements: The Wave Curl Analysis.

Electromagnetic ion cyclotron (EMIC) waves play important roles in particle loss processes in the magnetosphere. Determining the evolution of EMIC waves as they propagate and how this evolution affects wave-particle interactions requires accurate knowledge of the wave vector, k. We present a technique using the curl of the wave magnetic field to determine k observationally, enabled by the unique configuration and instrumentation of the Magnetospheric MultiScale (MMS) spacecraft. The wave curl analysis is demonstrated for synthetic arbitrary electromagnetic waves with varying properties typical of observed EMIC waves. The method is also applied to an EMIC wave interval observed by MMS on October 28, 2015. The derived wave properties and k from the wave curl analysis for the observed EMIC wave are compared with the Waves in Homogenous, Anisotropic, Multi-component Plasma (WHAMP) wave dispersion solution and with results from other single- and multi-spacecraft techniques. We find good agreement between k from the wave curl analysis, k determined from other observational techniques, and k determined from WHAMP. Additionally, the variation of k due to the time and frequency intervals used in the wave curl analysis is explored. This exploration demonstrates that the method is robust when applied to a wave containing at least 3-4 wave periods and over a rather wide frequency range encompassing the peak wave emission. These results provide confidence that we are able to directly determine the wave vector properties using this multi-spacecraft method implementation, enabling systematic studies of EMIC wave k properties with MMS.

The Mars 2020 Perseverance Rover Mast Camera Zoom (Mastcam-Z) Multispectral, Stereoscopic Imaging Investigation.

Mastcam-Z is a multispectral, stereoscopic imaging investigation on the Mars 2020 mission's Perseverance rover. Mastcam-Z consists of a pair of focusable, 4:1 zoomable cameras that provide broadband red/green/blue and narrowband 400-1000 nm color imaging with fields of view from 25.6° × 19.2° (26 mm focal length at 283 µrad/pixel) to 6.2° × 4.6° (110 mm focal length at 67.4 µrad/pixel). The cameras can resolve (≥ 5 pixels) ∼0.7 mm features at 2 m and ∼3.3 cm features at 100 m distance. Mastcam-Z shares significant heritage with the Mastcam instruments on the Mars Science Laboratory Curiosity rover. Each Mastcam-Z camera consists of zoom, focus, and filter wheel mechanisms and a 1648 × 1214 pixel charge-coupled device detector and electronics. The two Mastcam-Z cameras are mounted with a 24.4 cm stereo baseline and 2.3° total toe-in on a camera plate ∼2 m above the surface on the rover's Remote Sensing Mast, which provides azimuth and elevation actuation. A separate digital electronics assembly inside the rover provides power, data processing and storage, and the interface to the rover computer. Primary and secondary Mastcam-Z calibration targets mounted on the rover top deck enable tactical reflectance calibration. Mastcam-Z multispectral, stereo, and panoramic images will be used to provide detailed morphology, topography, and geologic context along the rover's traverse; constrain mineralogic, photometric, and physical properties of surface materials; monitor and characterize atmospheric and astronomical phenomena; and document the rover's sample extraction and caching locations. Mastcam-Z images will also provide key engineering information to support sample selection and other rover driving and tool/instrument operations decisions.

Spectral, Compositional, and Physical Properties of the Upper Murray Formation and Vera Rubin Ridge, Gale Crater, Mars.

During 2018 and 2019, the Mars Science Laboratory Curiosity rover investigated the chemistry, morphology, and stratigraphy of Vera Rubin ridge (VRR). Using orbital data from the Compact Reconnaissance Imaging Spectrometer for Mars, scientists attributed the strong 860 nm signal associated with VRR to the presence of red crystalline hematite. However, Mastcam multispectral data and CheMin X-ray diffraction (XRD) measurements show that the depth of the 860 nm absorption is negatively correlated with the abundance of red crystalline hematite, suggesting that other mineralogical or physical parameters are also controlling the 860 nm absorption. Here, we examine Mastcam and ChemCam passive reflectance spectra from VRR and other locations to link the depth, position, and presence or absence of iron-related mineralogic absorption features to the XRD-derived rock mineralogy. Correlating CheMin mineralogy to spectral parameters showed that the ~860 nm absorption has a strong positive correlation with the abundance of ferric phyllosilicates. New laboratory reflectance measurements of powdered mineral mixtures can reproduce trends found in Gale crater. We hypothesize that variations in the 860 nm absorption feature in Mastcam and ChemCam observations of VRR materials are a result of three factors: (1) variations in ferric phyllosilicate abundance due to its ~800-1,000 nm absorption; (2) variations in clinopyroxene abundance because of its band maximum at ~860 nm; and (3) the presence of red crystalline hematite because of its absorption centered at 860 nm. We also show that relatively small changes in Ca-sulfate abundance is one potential cause of the erosional resistance and geomorphic expression of VRR.

Synergistic Ground and Orbital Observations of Iron Oxides on Mt. Sharp and Vera Rubin Ridge.

Visible/short-wave infrared spectral data from the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) show absorptions attributed to hematite at Vera Rubin ridge (VRR), a topographic feature on northwest Mt. Sharp. The goals of this study are to determine why absorptions caused by ferric iron are strongly visible from orbit at VRR and to improve interpretation of CRISM data throughout lower Mt. Sharp. These goals are achieved by analyzing coordinated CRISM and in situ spectral data along the Curiosity Mars rover's traverse. VRR bedrock within areas that have the deepest ferric absorptions in CRISM data also has the deepest ferric absorptions measured in situ. This suggests strong ferric absorptions are visible from orbit at VRR because of the unique spectral properties of VRR bedrock. Dust and mixing with basaltic sand additionally inhibit the ability to measure ferric absorptions in bedrock stratigraphically below VRR from orbit. There are two implications of these findings: (1) Ferric absorptions in CRISM data initially dismissed as noise could be real, and ferric phases are more widespread in lower Mt. Sharp than previously reported. (2) Patches with the deepest ferric absorptions in CRISM data are, like VRR, reflective of deeper absorptions in the bedrock. One model to explain this spectral variability is late-stage diagenetic fluids that changed the grain size of ferric phases, deepening absorptions. Curiosity's experience highlights the strengths of using CRISM data for spectral absorptions and associated mineral detections and the caveats in using these data for geologic interpretations and strategic path planning tools.

N-Aryl-linked spirocyclic polymers for membrane separations of complex hydrocarbon mixtures.

The fractionation of crude-oil mixtures through distillation is a large-scale, energy-intensive process. Membrane materials can avoid phase changes in such mixtures and thereby reduce the energy intensity of these thermal separations. With this application in mind, we created spirocyclic polymers with N-aryl bonds that demonstrated noninterconnected microporosity in the absence of ladder linkages. The resulting glassy polymer membranes demonstrated nonthermal membrane fractionation of light crude oil through a combination of class- and size-based "sorting" of molecules. We observed an enrichment of molecules lighter than 170 daltons corresponding to a carbon number of 12 or a boiling point less than 200°C in the permeate. Such scalable, selective membranes offer potential for the hybridization of energy-efficient technology with conventional processes such as distillation.

Evidence for a Diagenetic Origin of Vera Rubin Ridge, Gale Crater, Mars: Summary and Synthesis of Curiosity's Exploration Campaign.

This paper provides an overview of the Curiosity rover's exploration at Vera Rubin ridge (VRR) and summarizes the science results. VRR is a distinct geomorphic feature on lower Aeolis Mons (informally known as Mount Sharp) that was identified in orbital data based on its distinct texture, topographic expression, and association with a hematite spectral signature. Curiosity conducted extensive remote sensing observations, acquired data on dozens of contact science targets, and drilled three outcrop samples from the ridge, as well as one outcrop sample immediately below the ridge. Our observations indicate that strata composing VRR were deposited in a predominantly lacustrine setting and are part of the Murray formation. The rocks within the ridge are chemically in family with underlying Murray formation strata. Red hematite is dispersed throughout much of the VRR bedrock, and this is the source of the orbital spectral detection. Gray hematite is also present in isolated, gray-colored patches concentrated toward the upper elevations of VRR, and these gray patches also contain small, dark Fe-rich nodules. We propose that VRR formed when diagenetic event(s) preferentially hardened rocks, which were subsequently eroded into a ridge by wind. Diagenesis also led to enhanced crystallization and/or cementation that deepened the ferric-related spectral absorptions on the ridge, which helped make them readily distinguishable from orbit. Results add to existing evidence of protracted aqueous environments at Gale crater and give new insight into how diagenesis shaped Mars' rock record.

Transdermal fluorescence detection of a dual fluorophore system for noninvasive point-of-care gastrointestinal permeability measurement.

The intestinal mucosal barrier prevents macromolecules and pathogens from entering the circulatory stream. Tight junctions in this barrier are compromised in inflammatory bowel diseases, environmental enteropathy, and enteric dysfunction. Dual sugar absorption tests are a standard method for measuring gastrointestinal integrity, however, these are not clinically amenable. Herein, we report on a dual fluorophore system and fluorescence detection instrumentation for which gastrointestinal permeability is determined in a rat small bowel disease model from the longitudinal measured transdermal fluorescence of each fluorophore. This fluorophore technology enables a specimen-free, noninvasive, point-of-care gastrointestinal permeability measurement which should be translatable to human clinical studies.

Psychosocial and functional contributors to personal recovery in serious mental illness.

Background: Although recovery-oriented services have been conceptualized to improve personal recovery, related research often focuses on measures of clinical recovery. Identifying the relationships between personal recovery, clinical recovery, and psychosocial variables will inform service components and outcome measurement in recovery-oriented services. Aims: This study sought to determine the connection between personal recovery and two sets of potential contributors: psychosocial variables (i.e., empowerment, resilience, and consumer involvement) and functional indicators of clinical recovery. Method: These relationships were examined by analyzing survey data collected from 266 consumers who are receiving public mental health services in the United States. Results: Empowerment, resilience and psychological involvement were associated with personal recovery. Clinical recovery did not uniquely contribute to personal recovery once psychosocial factors were accounted for. Interactions revealed that the relationship between psychological involvement and personal recovery was stronger for those who had been recently hospitalized, and for those with relatively greater resilience. Conclusions: Results indicate that personal recovery is an essential outcome measure for recovery-oriented services that cannot be replaced by clinical recovery outcome measurement. Additionally, empowerment, resilience, and consumer involvement are key components of recovery, which suggests that services and outcome measures should prioritize incorporation of these constructs.

Give me a SINE: how Selective Inhibitors of Nuclear Export modulate autophagy and aging.

Autophagy is a cellular recycling process leading to lysosomal degradation of damaged macromolecules, which can protect cells against aging. The transcription factor EB (TFEB), a major transcriptional regulator of genes involved in autophagy and lysosomal function, is emerging as an attractive target for pharmacological modulation. Recently, we demonstrated that inhibiting the function of nuclear export protein exportin 1 (XPO1 or CRM1) with RNAi or with selective inhibitors of nuclear export (SINE) results in the nuclear enrichment of TFEB and enhancement of autophagy in model organisms and human cells. In addition to current efforts to validate the use of SINE in cancer therapies, our work highlights the potential benefits of these drugs toward improving outcomes in neurodegenerative diseases and aging.

Synovial and systemic pharmacokinetics (PK) of triamcinolone acetonide (TA) following intra-articular (IA) injection of an extended-release microsphere-based formulation (FX006) or standard crystalline suspension in patients with knee osteoarthritis (OA).

OBJECTIVE: Intra-articular (IA) corticosteroids relieve osteoarthritis (OA) pain, but rapid absorption into systemic circulation may limit efficacy and produce untoward effects. We compared the pharmacokinetics (PK) of IA triamcinolone acetonide (TA) delivered as an extended-release, microsphere-based formulation (FX006) vs a crystalline suspension (TAcs) in knee OA patients. METHOD: This Phase 2 open-label study sequentially enrolled 81 patients who received a single IA injection of FX006 (5 mL, 32 mg delivered dose, N = 63) or TAcs (1 mL, 40 mg, N = 18). Synovial fluid (SF) aspiration was attempted in each patient at baseline and one post-IA-injection visit (FX006: Week 1, Week 6, Week 12, Week 16 or Week 20; TAcs: Week 6). Blood was collected at baseline and multiple post-injection times. TA concentrations (validated LC-MS/MS, geometric means (GMs)), PK (non-compartmental analysis models), and adverse events (AEs) were assessed. RESULTS: SF TA concentrations following FX006 were quantifiable through Week 12 (pg/mL: 231,328.9 at Week 1; 3590.0 at Week 6; 290.6 at Week 12); post-TAcs, only two of eight patients had quantifiable SF TA at Week 6 (7.7 pg/mL). Following FX006, plasma TA gradually increased to peak (836.4 pg/mL) over 24 h and slowly declined to <110 pg/mL over Weeks 12-20; following TAcs, plasma TA peaked at 4 h (9628.8 pg/mL), decreased to 4991.1 pg/mL at 24 h, and was 149.4 pg/mL at Week 6, the last post-treatment time point assessed. AEs were similar between groups. CONCLUSION: In knee OA patients, microsphere-based TA delivery via a single IA injection prolonged SF joint residency, diminished peak plasma levels, and thus reduced systemic TA exposure relative to TAcs.

Escherichia coli isolates from commercial chicken meat and eggs cause sepsis, meningitis and urinary tract infection in rodent models of human infections.

The zoonotic potential of Escherichia coli from chicken-source food products is important to define for public health purposes. Previously, genotypic and phenotypic screening of E. coli isolates from commercial chicken meat and shell eggs identified some E. coli strains that by molecular criteria resembled human-source extraintestinal pathogenic E. coli (ExPEC). Here, to clarify the zoonotic risk of such chicken-source E. coli, we compared selected E. coli isolates from chicken meat and eggs, stratified by molecularly defined ExPEC status, to human-source ExPEC and to laboratory E. coli for virulence in rodent models of sepsis, meningitis and UTI, and evaluated whether specific bacterial characteristics predict experimental virulence. Multiple chicken-source E. coli resembled human-source ExPEC in their ability to cause one or multiple different ExPEC-associated infections. Swimming ability corresponded with urovirulence, K1 capsule corresponded with ability to cause neonatal meningitis, and biofilm formation in urine corresponded with ability to cause sepsis. In contrast, molecularly defined ExPEC status and individual genotypic traits were uncorrelated with ability to cause sepsis, and neither complement sensitivity nor growth in human urine corresponded with virulence in any infection model. These findings establish that chicken-derived food products contain E. coli strains that, in rodent models of multiple human-associated ExPEC infections, are able to cause disease comparably to human-source E. coli clinical isolates, which suggests that they may pose a significant food safety threat. Further study is needed to define the level of risk they pose to human health, which if appreciable would justify efforts to monitor for and reduce or eliminate them.