Hydrogen Atom Abstraction from an OsII(NH3)2 Complex Generates an OsIV(NH2)2 Complex: Experimental and Computational Analysis of the N-H Bond Dissociation Free Energies and Reactivity.

Double hydrogen atom abstraction from (TMP)OsII(NH3)2 (TMP = tetramesitylporphyrin) with phenoxyl or nitroxyl radicals leads to (TMP)OsIV(NH2)2. This unusual bis(amide) complex is diamagnetic and displays an N-H resonance at 12.0 ppm in its 1H NMR spectrum. 1H-15N correlation experiments identified a 15N NMR spectroscopic resonance signal at -267 ppm. Experimental reactivity studies and density functional theory calculations support relatively weak N-H bonds of 73.3 kcal/mol for (TMP)OsII(NH3)2 and 74.2 kcal/mol for (TMP)OsIII(NH3)(NH2). Cyclic voltammetry experiments provide an estimate of the pKa of [(TMP)OsIII(NH3)2]+. In the presence of Barton's base, a current enhancement is observed at the Os(III/II) couple, consistent with an ECE event. Spectroscopic experiments confirmed (TMP)OsIV(NH2)2 as the product of bulk electrolysis. Double hydrogen atom abstraction is influenced by π donation from the amides of (TMP)OsIV(NH2)2 into the d orbitals of the Os center, favoring the formation of (TMP)OsIV(NH2)2 over N-N coupling. This π donation leads to a Jahn-Teller distortion that splits the energy levels of the dxz and dyz orbitals of Os, results in a low-spin electron configuration, and leads to minimal aminyl character on the N atoms, rendering (TMP)OsIV(NH2)2 unreactive toward amide-amide coupling.

Weakening the N-H Bonds of NH3 Ligands: Triple Hydrogen-Atom Abstraction to Form a Chromium(V) Nitride.

Weakening and cleaving N-H bonds is crucial for improving molecular ammonia (NH3) oxidation catalysts. We report the synthesis and H-atom-abstraction reaction of bis(ammonia)chromium porphyrin complexes Cr(TPP)(NH3)2 and Cr(TMP)(NH3)2 (TPP = 5,10,15,20-tetraphenyl-meso-porphyrin and TMP = 5,10,15,20-tetramesityl-meso-porphyrin) using bulky aryloxyl radicals. The triple H-atom-abstraction reaction results in the formation of CrV(por)(≡N), with the nitride derived from NH3, as indicated by UV-vis and IR and single-crystal structural determination of Cr(TPP)(≡N). Subsequent oxidation of this chromium(V) nitrido complex results in the formation of CrIII(por), with scission of the Cr≡N bond. Computational analysis illustrates the progression from CrII to CrV and evaluates the energetics of abstracting H atoms from CrII-NH3 to generate CrV≡N. The formation and isolation of CrV(por)(≡N) illustrates the stability of these species and the need to chemically activate the nitride ligand for atom transfer or N-N coupling reactivity.

Protonation of Serine in Gas and Condensed and Microsolvated States in Aqueous Solution.

Identification of molecules and elucidation of their chemical structure are ubiquitous problems in chemistry. Mass spectrometry (MS) can be used due to its sensitivity and versatility. For detection to occur, analytes must be ionized and transferred to the gas phase. Soft ionization processes such as electrospray ionization are popular; however, resulting microsolvated phases can alter the chemistry of analytes and therefore detection and identification. To understand these processes, we use computational methods to probe the ionization propensity of serine in the gas phase, aqueous microsolvated clusters, and aqueous solution. We show that the tautomeric form of serine is altered by the presence of water, as five water molecules can stabilize the zwitterionic tautomer. Inclusion of cosolutes such as ions can stabilize the zwitterion with as few as one or two water molecules present. We demonstrate that ionization propensity, as measured by gas phase bacisity, can increase by over 100 kJ/mol when placed in a small water-serine cluster, showing the sensitivity of the chemistry of microsolvated analytes. Finally, detailed analysis reveals that small droplets (less than seven water molecules) are extremely sensitive to addition of further water molecules. Beyond this limit, structural and electronic properties change little with droplet size.

Multiple N-H and C-H Hydrogen Atom Abstractions Through Coordination-Induced Bond Weakening at Fe-Amine Complexes.

We report the use of the reported Fe-phthalocyanine complex, PcFe (1; Pc = 1,4,8,11,15,18,22,25-octaethoxy-phthalocyanine), to generate PcFe-amine complexes 1-(NH3)2, 1-(MeNH2)2, and 1-(Me2NH)2. Treatment of 1 or 1-(NH3)2 to an excess of the stable aryloxide radical, 2,4,6-tritert-butylphenoxyl radical (tBuArO•), under NH3 resulted in catalytic H atom abstraction (HAA) and C-N coupling to generate the product 4-amino-2,4,6-tritert-butylcyclohexa-2,5-dien-1-one (2) and tBuArOH. Exposing 1-(NH3)2 to an excess of the trityl (CPh3) variant, 2,6-di-tert-butyl-4-tritylphenoxyl radical (TrArO•), under NH3 did not lead to catalytic ammonia oxidation as previously reported in a related Ru-porphyrin complex. However, pronounced coordination-induced bond weakening of both α N-H and ß C-H in the alkylamine congeners, 1-(MeNH2)2 and 1-(Me2NH)2, led to multiple HAA events yielding the unsaturated cyanide complex, 1-(MeNH2)(CN), and imine complex, 1-(MeN═CH2)2, respectively. Subsequent C-N bond formation was also observed in the latter upon addition of a coordinating ligand. Detailed computational studies support an alternating mechanism involving sequential N-H and C-H HAA to generate these unsaturated products.

Design of robust 2,2'-bipyridine ligand linkers for the stable immobilization of molecular catalysts on silicon(111) surfaces.

The attachment of the 2,2'-bipyridine (bpy) moieties to the surface of planar silicon(111) (photo)electrodes was investigated using ab initio simulations performed on a new cluster model for methyl-terminated silicon. Density functional theory (B3LYP) with implicit solvation techniques indicated that adventitious chlorine atoms, when present in the organic linker backbone, led to instability at very negative potentials of the surface-modified electrode. In prior experimental work, chlorine atoms were present as a trace surface impurity due to required surface processing chemistry, and thus could plausibly result in the observed surface instability of the linker. Free energy calculations for the Cl-atom release process with model silyl-linker constructs revealed a modest barrier (14.9 kcal mol-1) that decreased as the electrode potential became more negative. A small library of new bpy-derived structures has additionally been explored computationally to identify strategies that could minimize chlorine-induced linker instability. Structures with fluorine substituents are predicted to be more stable than their chlorine analogues, whereas fully non-halogenated structures are predicted to exhibit the highest stability. The behavior of a hydrogen-evolving molecular catalyst Cp*Rh(bpy) (Cp* = pentamethylcyclopentadienyl) immobilized on a silicon(111) cluster was explored theoretically to evaluate differences between the homogeneous and surface-attached behavior of this species in a tautomerization reaction observed under reductive conditions for catalytic H2 evolution. The calculated free energy difference between the tautomers is small, hence the results suggest that use of reductively stable linkers can enable robust attachment of catalysts while maintaining chemical behavior on the electrode similar to that exhibited in homogeneous solution.

Intramolecular Electrostatic Effects on O2, CO2, and Acetate Binding to a Cationic Iron Porphyrin.

Noncovalent electrostatic interactions are important in many biological and chemical reactions, especially those that involve charged intermediates. There has been a growing interest in using electrostatic ligand designs-placing charges in the second coordination sphere-to improve molecular reactivity, catalysis, and electrocatalysis. For instance, an iron porphyrin bearing four cationic ortho-trimethylanilinium groups, Fe(o-TMA), has been reported to be an exceptional electrocatalyst for both the carbon dioxide reduction reaction (CO2RR) and the oxygen reduction reaction (ORR). These reactions involve many different steps, and it is not evident which steps are affected by the four positive charges, or why. By comparing Fe(o-TMA) with the related iron-tetraphenylporphyrin, this work examines how covalently positioned charged groups affect substrate binding and other key pre-equilibria of both the ORR and CO2RR, specifically acetate, dioxygen, and carbon dioxide binding. This study is among the first to directly measure the effects of electrostatics on ligand-binding. The results show that adding electrostatic groups to a catalyst design often results in a complex interplay of multiple effects, including changes in pre-equilibria prior to substrate binding, combinations of through-space and inductive contributions, and effects of ionic strength and solution dielectric. The inverse half-order dependence of binding constant on ionic strength is proposed as a clear marker for an electrostatic effect. The conclusions provide guidance for the increasingly popular electrostatic ligand designs in catalysis and other reactivity.

Oxidation of Ammonia with Molecular Complexes.

Oxidation of ammonia by molecular complexes is a burgeoning area of research, with critical scientific challenges that must be addressed. A fundamental understanding of individual reaction steps is needed, particularly for cleavage of N-H bonds and formation of N-N bonds. This Perspective evaluates the challenges of designing molecular catalysts for oxidation of ammonia and highlights recent key contributions to realizing the goals of viable energy storage and retrieval based on the N-H bonds of ammonia in a carbon-free energy cycle.

Selectivity-Determining Steps in O2 Reduction Catalyzed by Iron(tetramesitylporphyrin).

The oxygen reduction reaction (ORR) is the cathode reaction in fuel cells and its selectivity for water over hydrogen peroxide production is important for these technologies. Iron porphyrin catalysts have long been studied for the ORR, but the origins of their selectivity are not well understood because the selectivity-determining step(s) usually occur after the rate-determining step. We report here the effects of acid concentration, as well as other solution conditions such as acid pKa, on the H2O2/H2O selectivity in electrocatalytic ORR by iron(tetramesitylporphyrin) (Fe(TMP)) in DMF. The results show that selectivity reflects a kinetic competition in which the dependence on [HX] is one order greater for the production of H2O than H2O2. Based on such experimental results and computational studies, we propose that the selectivity is governed by competition between protonation of the hydroperoxo intermediate, FeIII(TMP)(OOH), to produce water versus dissociation of the HOO- ligand to yield H2O2. The data rule out a bifurcation based on the regioselectivity of protonation of the hydroperoxide, as suggested in the enzymatic systems. Furthermore, the analysis developed in this report should be generally valuable to the study of selectivity in other multi-proton/multi-electron electrocatalytic reactions.

Diversion of Catalytic C-N Bond Formation to Catalytic Oxidation of NH3 through Modification of the Hydrogen Atom Abstractor.

We report that (TMP)Ru(NH3)2 (TMP = tetramesitylporphryin) is a molecular catalyst for oxidation of ammonia to dinitrogen. An aryloxy radical, tri-tert-butylphenoxyl (ArO·), abstracts H atoms from a bound ammonia ligand of (TMP)Ru(NH3)2, leading to the discovery of a new catalytic C-N coupling to the para position of ArO· to form 4-amino-2,4,6-tri-tert-butylcyclohexa-2,5-dien-1-one. Modification of the aryloxy radical to 2,6-di-tert-butyl-4-tritylphenoxyl radical, which contains a trityl group at the para position, prevents C-N coupling and diverts the reaction to catalytic oxidation of NH3 to give N2. We achieved 125 ± 5 turnovers at 22 °C for oxidation of NH3, the highest turnover number (TON) reported to date for a molecular catalyst.

Triple hydrogen atom abstraction from Mn-NH3 complexes results in cyclophosphazenium cations.

All hydrogen atoms of the NH3 in [Mn(depe)2(CO)(NH3)]+ are abstracted by 2,4,6-tri-tert-butylphenoxyl radical, resulting in the isolation of a rare cyclophosphazenium cation, [(Et2P(CH2)2PEt2)N]+, in 76% yield. An analogous reaction is observed for [Mn(dppe)2(CO)(NH3)]+. Computations suggest insertion of NHx into a Mn-P bond provides the thermodynamic driving force. Contextualization of this reaction provides insights on catalyst design and breaking strong N-H bonds.

Catalytic Ammonia Oxidation to Dinitrogen by Hydrogen Atom Abstraction.

Catalysts for the oxidation of NH3 are critical for the utilization of NH3 as a large-scale energy carrier. Molecular catalysts capable of oxidizing NH3 to N2 are rare. This report describes the use of [Cp*Ru(PtBu 2 NPh 2 )(15 NH3 )][BArF 4 ], (PtBu 2 NPh 2 =1,5-di(phenylaza)-3,7-di(tert-butylphospha)cyclooctane; ArF =3,5-(CF3 )2 C6 H3 ), to catalytically oxidize NH3 to dinitrogen under ambient conditions. The cleavage of six N-H bonds and the formation of an N≡N bond was achieved by coupling H+ and e- transfers as net hydrogen atom abstraction (HAA) steps using the 2,4,6-tri-tert-butylphenoxyl radical (t Bu3 ArO. ) as the H atom acceptor. Employing an excess of t Bu3 ArO. under 1 atm of NH3 gas at 23 °C resulted in up to ten turnovers. Nitrogen isotopic (15 N) labeling studies provide initial mechanistic information suggesting a monometallic pathway during the N⋅⋅⋅N bond-forming step in the catalytic cycle.

Mechanism of Catalytic O2 Reduction by Iron Tetraphenylporphyrin.

The catalytic reduction of O2 to H2O is important for energy transduction in both synthetic and natural systems. Herein, we report a kinetic and thermochemical study of the oxygen reduction reaction (ORR) catalyzed by iron tetraphenylporphyrin (Fe(TPP)) in N, N'-dimethylformamide using decamethylferrocene as a soluble reductant and para-toluenesulfonic acid ( pTsOH) as the proton source. This work identifies and characterizes catalytic intermediates and their thermochemistry, providing a detailed mechanistic understanding of the system. Specifically, reduction of the ferric porphyrin, [FeIII(TPP)]+, forms the ferrous porphyrin, FeII(TPP), which binds O2 reversibly to form the ferric-superoxide porphyrin complex, FeIII(TPP)(O2•-). The temperature dependence of both the electron transfer and O2 binding equilibrium constants has been determined. Kinetic studies over a range of concentrations and temperatures show that the catalyst resting state changes during the course of each catalytic run, necessitating the use of global kinetic modeling to extract rate constants and kinetic barriers. The rate-determining step in oxygen reduction is the protonation of FeIII(TPP)(O2•-) by pTsOH, which proceeds with a substantial kinetic barrier. Computational studies indicate that this barrier for proton transfer arises from an unfavorable preassociation of the proton donor with the superoxide adduct and a transition state that requires significant desolvation of the proton donor. Together, these results are the first example of oxygen reduction by iron tetraphenylporphyrin where the pre-equilibria among ferric, ferrous, and ferric-superoxide intermediates have been quantified under catalytic conditions. This work gives a generalizable model for the mechanism of iron porphyrin-catalyzed ORR and provides an unusually complete mechanistic study of an ORR reaction. More broadly, this study also highlights the kinetic challenges for proton transfer to catalytic intermediates in organic media.

Design and reactivity of pentapyridyl metal complexes for ammonia oxidation.

Oxidation of NH3 to N2 by pentapyridyl metal complexes via hydrogen atom abstraction was investigated computationally. Quantum chemical analysis reveals insights on orbital symmetry requirements for efficient NH3 oxidation. The most promising complex, [(PY5)Mo(NH3)]2+, was studied experimentally. It shows conversion of NH3 to N2 upon treatment with 2,4,6-tri-tert-butylphenoxyl radical.

Anion control of tautomeric equilibria: Fe-H vs. N-H influenced by NH···F hydrogen bonding.

Counterions can play an active role in chemical reactivity, modulating reaction pathways, energetics and selectivity. We investigated the tautomeric equilibrium resulting from protonation of Fe(PEtNMePEt)(CO)3 (PEtNMePEt = (Et2PCH2)2NMe) at Fe or N. Protonation of Fe(PEtNMePEt)(CO)3 by [(Et2O)2H]+[B(C6F5)4]- occurs at the metal to give the iron hydride [Fe(PEtNMePEt)(CO)3H]+[B(C6F5)4]-. In contrast, treatment with HBF4·OEt2 gives protonation at the iron and at the pendant amine. Both the FeH and NH tautomers were characterized by single crystal X-ray diffraction. Addition of excess BF4 - to the equilibrium mixture leads to the NH tautomer being exclusively observed, due to NH···F hydrogen bonding. A quantum chemical analysis of the bonding properties of these systems provided a quantification of hydrogen bonding of the NH to BF4 - and to OTf-. Treatment of Fe(PEtNMePEt)(CO)3 with excess HOTf gives a dicationic complex where both the iron and nitrogen are protonated. Isomerization of the dicationic complex was studied by NOESY NMR spectroscopy.

Evaluation of attractive interactions in the second coordination sphere of iron complexes containing pendant amines.

The interactions between pendant amines in the second coordination sphere and ligands in the first coordination sphere are important for understanding the structures and reactivity of complexes containing PR2NR'2 ligands, which have been shown to be highly active H2 oxidation/production catalysts. A series of [Fe(PPh2NBn2)2(X)(Y)]n+ complexes have been prepared and structurally characterized. These complexes have two different ligands with which the pendant amines of the diphosphine ligand can interact. The solid state structure of cis-Fe(PPh2NBn2)2Cl2 reveals that the six-membered rings adjacent to the P atoms are in a boat confirmation, resulting in close NP distances that suggests the P atoms have a greater affinity for the lone pair of electrons on the N atom than chloride ligands. Similarly, boat conformations are observed for both rings adjacent to the hydride ligands of trans-[HFe(PPh2NBn2)2(CH3CN)]+ and trans-HFe(PPh2NBn2)2Cl, resulting in short NH distances. Spectroscopic and computational studies of trans-[HFe(PPh2NBn2)2(CO)]+, trans-[HFe(PPh2NBn2)(PPh2NBn2H)(CO)]2+, and trans-[HFe(PPh2NBn2)2(H2)]+ indicate the complexes are more stable when the pendant amines in boat conformations are adjacent to the hydride ligand. These data suggest an attractor ordering of H- > CO > H2 > PR3 > Cl- ∼ CH3CN.

Catalytic Silylation of N2 and Synthesis of NH3 and N2H4 by Net Hydrogen Atom Transfer Reactions Using a Chromium P4 Macrocycle.

We report the first discrete molecular Cr-based catalysts for the reduction of N2. This study is focused on the reactivity of the Cr-N2 complex, trans-[Cr(N2)2(PPh4NBn4)] (P4Cr(N2)2), bearing a 16-membered tetraphosphine macrocycle. The architecture of the [16]-PPh4NBn4 ligand is critical to preserve the structural integrity of the catalyst. P4Cr(N2)2 was found to mediate the reduction of N2 at room temperature and 1 atm pressure by three complementary reaction pathways: (1) Cr-catalyzed reduction of N2 to N(SiMe3)3 by Na and Me3SiCl, affording up to 34 equiv N(SiMe3)3; (2) stoichiometric reduction of N2 by protons and electrons (for example, the reaction of cobaltocene and collidinium triflate at room temperature afforded 1.9 equiv of NH3, or at -78 °C afforded a mixture of NH3 and N2H4); and (3) the first example of NH3 formation from the reaction of a terminally bound N2 ligand with a traditional H atom source, TEMPOH (2,2,6,6-tetramethylpiperidine-1-ol). We found that trans-[Cr(15N2)2(PPh4NBn4)] reacts with excess TEMPOH to afford 1.4 equiv of 15NH3. Isotopic labeling studies using TEMPOD afforded ND3 as the product of N2 reduction, confirming that the H atoms are provided by TEMPOH.

Role of Ligand Protonation in Dihydrogen Evolution from a Pentamethylcyclopentadienyl Rhodium Catalyst.

Recent work has shown that Cp*Rh(bpy) [Cp* = pentamethylcyclopentadienyl, bpy = 2,2'- bipyridine] undergoes endo protonation at the [Cp*] ligand in the presence of weak acid (Et3NH+; pKa = 18.8 in MeCN). Upon exposure to stronger acid (e.g., DMFH+; pKa = 6.1), hydrogen is evolved with unity yield. Here, we study the mechanisms by which this catalyst evolves dihydrogen using density functional theory (M06) with polarizable continuum solvation. The calculations show that the complex can be protonated by weak acid first at the metal center with a barrier of 3.2 kcal/mol; this proton then migrates to the ring to form the detected intermediate, a rhodium(I) compound bearing endo η4-Cp*H. Stronger acid is required to evolve hydrogen, which calculations show happens via a concerted mechanism. The acid approaches and protonates the metal, while the second proton simultaneously migrates from the ring with a barrier of ∼12 kcal/mol. Under strongly acidic conditions, we find that hydrogen evolution can proceed through a traditional metal-hydride species; protonation of the initial hydride to form an H-H bond occurs before migration of the hydride (in the form of a proton) to the [Cp*] ring (i.e., H-H bond formation is faster than hydride-proton tautomerization). This work demonstrates the role of acid strength in accessing different mechanisms of hydrogen evolution. Calculations also predict that modification of the bpy ligand by a variety of functional groups does not affect the preference for [Cp*] protonation, although the driving force for protonation changes. However, we predict that exchange of bpy for a bidentate phosphine ligand will stabilize a rhodium(III) hydride, reversing the preference for bound [Cp*H] found in all computed bpy derivatives and offering an appealing alternative ligand platform for future experimental and computational mechanistic studies of H2 evolution.

Proton-hydride tautomerism in hydrogen evolution catalysis.

Efficient generation of hydrogen from renewable resources requires development of catalysts that avoid deep wells and high barriers. Information about the energy landscape for H2 production can be obtained by chemical characterization of catalytic intermediates, but few have been observed to date. We have isolated and characterized a key intermediate in 2e(-) + 2H(+) → H2 catalysis. This intermediate, obtained by treatment of Cp*Rh(bpy) (Cp*, η(5)-pentamethylcyclopentadienyl; bpy, κ(2)-2,2'-bipyridyl) with acid, is not a hydride species but rather, bears [η(4)-Cp*H] as a ligand. Delivery of a second proton to this species leads to evolution of H2 and reformation of η(5)-Cp* bound to rhodium(III). With suitable choices of acids and bases, the Cp*Rh(bpy) complex catalyzes facile and reversible interconversion of H(+) and H2.

Reactivity of a series of isostructural cobalt pincer complexes with CO2, CO, and H(+).

The preparation and characterization of a series of isostructural cobalt complexes [Co(t-Bu)2P(E)Py(E)P(t-Bu)2(CH3CN)2][BF4]2 (Py = pyridine, E = CH2, NH, O, and X = BF4 (1a-c)) and the corresponding one-electron reduced analogues [Co(t-Bu)2P(E)Py(E)P(t-Bu)2(CH3CN)2][BF4]2 (2a-c) are reported. The reactivity of the reduced cobalt complexes with CO2, CO, and H(+) to generate intermediates in a CO2 to CO and H2O reduction cycle are described. The reduction of 1a-c and subsequent reactivity with CO2 was investigated by cyclic voltammetry, and for 1a also by infrared spectroelectrochemistry. The corresponding CO complexes of (2a-c) were prepared, and the Co-CO bond strengths were characterized by IR spectroscopy. Quantum mechanical methods (B3LYP-d3 with solvation) were used to characterize the competitive reactivity of the reduced cobalt centers with H(+) versus CO2. By investigating a series of isostructural complexes, correlations in reactivity with ligand electron withdrawing effects are made.

Atomic layer deposition of quantum-confined ZnO nanostructures.

The modulation of optoelectronic properties, such as the bandgap of a pure-component semiconductor material, is a useful ability that can be achieved by few techniques. Atomic layer deposition (ALD) was used here to experimentally demonstrate the ability to deposit films that exhibit quantum confinement on three-dimensional surfaces. Polycrystalline ZnO films ranging from approximately 1.5 to 15 nm in thickness were deposited via ALD using diethylzinc and hydrogen peroxide at 100 degrees C. Conformal, pinhole-free films were deposited on Si wafers and on nanosized spherical SiO(2) particles using an augmented central composite design strategy. Powder x-ray diffraction was used to measure the crystallite size of the films and monitor size evolution on the basis of the number of ALD cycles and thermal annealing post-treatments. The absorbance of the ZnO films on Si wafers and SiO(2) particles was measured using spectroscopic ellipsometry and diffuse transmittance techniques, respectively. Post-deposition annealing steps increased the crystallite size of the films, independently of the coating thickness. The ZnO bandgap was increasingly blue-shifted for films of decreasing crystallite size, approaching +0.3 eV at dimensions of 2-3 nm. The nonlinear bandgap response correlated well with the Brus model. This work represents an experimental demonstration of quantum confinement using ALD on two- and three-dimensional substrates.