Au9 nanocluster adsorption and agglomeration control through sulfur modification of mesoporous TiO2.

In the present work phenyl phosphine-protected Au9 nanoclusters were deposited onto (3-mercaptopropyl) trimethoxysilane (MPTMS) modified and unmodified mesoporous screen printed TiO2. The removal of the cluster ligands by annealing was applied to enhance the interaction between Au cluster cores and semiconductor surfaces in the creation of efficient photocatalytic systems. The heat treatment could lead to undesired agglomeration of Au clusters, affecting their unique properties as size specific clusters. To address this challenge, the semiconductor surfaces were modified by MPTMS. Characterization techniques confirm the effectiveness of the modification processes, and XPS demonstrates that S functionalized MTiO2 is more efficient than MTiO2 in increasing Au9 NCs adsorption by a factor of 10 and preventing Au cluster agglomeration even after annealing. Overall, this work contributes valuable insights into photocatalytic systems through controlled modification of semiconductor surfaces and Au nanocluster deposition.

Impurity profiling of methamphetamine synthesized from methyl α-acetylphenylacetate.

The group of P2P precursors including α-phenylacetoacetonitrile (APAAN), α-phenylacetoamide (APAA) and methyl α-acetylphenylacetate (MAPA) has become increasingly popular in Europe and other parts of the world in the last decade. Previous investigations have reported the use of APAAN in the synthesis of amphetamine and methamphetamine and identified a range of characteristic impurities. This research has expanded upon the current literature by investigating the use of MAPA in the synthesis of methamphetamine. In this study methamphetamine was synthesized via three common clandestine methods: the Leuckart synthesis and two reductive amination methods. We report the identification of seven impurities, four of which are methyl ester equivalents of impurities previously reported for the detection of APAAN. These are methyl 2-phenylbut-2-enoate, methyl 2-phenyl-3-hydroxybutanoate, methyl 3-(methylamino)-2-phenylbut-2-enoate and methyl 3-(methylamino)-2-phenylbutanoate. The other impurities identified are ethyl ester compounds formed via transesterification of the methyl ester due to the reaction solvent. This susceptibility for transesterification suggests that identification of the pre-precursor used may not always be straightforward and may be dependent on the reaction conditions employed. Of the impurities reported, methyl 3-(methylamino)-2-phenylbutanoate was deemed to be a potentially reliable impurity for detection of the use of MAPA; however, it is expected that lower levels of characteristic impurities may be detected in methamphetamine synthesized from MAPA than that from APAAN.

Impurity profiling of methamphetamine synthesised from α-phenylacetoacetonitrile (APAAN).

The rise in popularity of 'designer' precursor compounds for the synthesis of amphetamine-type stimulants poses a significant challenge to law enforcement agencies. One such precursor is α-phenylacetoacetonitrile (APAAN). APAAN emerged in Europe in 2010 and quickly became one of the most popular precursors for amphetamine synthesis in that region. Previous literature has identified four APAAN-specific impurities formed in the synthesis of amphetamine; however, there is currently no research on the use of APAAN in the synthesis of methamphetamine, which is more likely to be employed in a non-European market. In this study methamphetamine was synthesised via three common clandestine methods: the Leuckart method and two reductive amination methods. We report the identification of five new impurities and two previously identified impurities characteristic for the use of APAAN in the synthesis of methamphetamine. The newly identified impurities were characterised by MS and NMR and determined to be (E)-3-(methylamino)-2-phenylbut-2-enenitrile, 3-(methylamino)-2-phenylbutanenitrile, 3-methyl-2,4-diphenylpentanedinitrile, 2-phenylbutyronitrile and 3-hydroxy-2-phenylbutanenitrile.

A Tetra-Porphyrin Host Exhibiting Interannular Cooperativity.

Recently identified as another form of cooperativity, interannular cooperativity is rarely observed in supramolecular chemistry. A tetra-porphyrin molecular tweezer with two bis-porphyrin binding sites is reported that exhibits archetypal interannular cooperativity when complexing 1,4-diazabicyclo[2.2.2]octane (DABCO). The UV/Vis titration data best supported a 1:2 plus 2:2 plus 1:4 complexation model (host:guest), giving K12 =6.32×1013  m-2 , K22 =3.04×1020  m-3 , and K14 =1.92×1016  m-4 in CHCl3 . The NMR titration data supported the formation of two sandwich species, including tetra-porphyrin⋅(DABCO)2 as the major species, although there are speciation differences between UV/Vis and NMR concentrations. Using statistical analysis, interannular cooperativity (γ) for tetra-porphyrin⋅(DABCO)2 was determined to be negative (γ=2.41×10-3 ), which may be explained by DABCO being too small to be optimally bound simultaneously at both bis-porphyrin binding sites.

Ranking Oxidant Sensitiveness: A Guide for Synthetic Utility.

Common oxidants used in chemical synthesis, including newly developed perruthenates, were evaluated in the context of understanding (and better appreciating) the sensitiveness and associated potential hazards of these reagents. Analysis using sealed cell differential scanning calorimetry (scDSC) facilitated Yoshida correlations, which were compared to impact sensitiveness and electrostatic discharge experiments (ESD), that enabled sensitiveness ranking. Methyltriphenylphoshonium perruthenate (MTP3, 8), isoamyltriphenylphosphonium perruthenate (ATP3, 7) and tetraphenylphosphonium perruthenate (TP3, 9) were found to be the most sensitive followed by 2-iodoxybenzoic acid (IBX, 2) and benzoyl peroxide (BPO, 10), whereas the most benign were observed to be Oxone (12), manganese dioxide (MnO2 , 13), and N-bromosuccinimide (NBS, 17).

Molecular tweezers with a rotationally restricted linker and freely rotating porphyrin moieties.

The effect of the degree of conformational rigidity and/or flexibility on preorganisation in artificial molecular receptors continues to be actively explored by supramolecular chemists. This work describes a bis-porphyrin architecture, linked via a rigid polycyclic backbone, in which a sterically bulky 2,3,5,6-tetramethylphenyl diimide core restricts rotation to afford two non-interconvertible tweezer conformations; syn- and anti-. After separation, the host-guest chemistry of each conformation was studied independently. The difference in host geometry allows only the syn-conformation to form a strong 1 : 1 bis-porphyrin complex with the diamino ligand 1,4-diazabicyclo[2.2.2]octane (DABCO) (K11 = 1.25 × 108 M-1), with the anti-conformation adopting a 2 : 2 sandwich complex with DABCO (K22 = 5.57 × 1017 M-3).

Detailed investigations into the Akabori-Momotani reaction for the synthesis of amphetamine type stimulants: Part 2.

The Akabori-Momotani reaction can be used to synthesise pseudoephedrine in 50% yield from N-methylalanine and benzaldehyde. This paper investigates electronic effects of substituted benzaldehydes on the reaction to synthesise amphetamine type stimulants and identifies several new Akabori-Momotani by-products, 1-[(4-methoxybenzyl)(methyl)amino]ethanol (11c), 2-(4-methoxyphenyl)-3,4-dimethyl-1,3-oxazolidine (12c), 1,2,3,4-tetramethyl-5,6-di-(4-methoxyphenyl)piperazine (13c) and 1,2,4,5-tetramethyl-3,6-di-(4-methoxyphenyl)piperazine (14c). This paper also investigates pseudoephedrine and methamphetamine isomeric distribution from the Akabori-Momotani reaction with the aid of molecular modelling to understand why more pseudoephedrine than ephedrine is produced.

Polysulfides made from re-purposed waste are sustainable materials for removing iron from water.

Water contaminated with Fe3+ is undesirable because it can result in discoloured plumbing fixtures, clogging, and a poor taste and aesthetic profile for drinking water. At high levels, Fe3+ can also promote the growth of unwanted bacteria, so environmental agencies and water authorities typically regulate the amount of Fe3+ in municipal water and wastewater. Here, polysulfide sorbents-prepared from elemental sulfur and unsaturated cooking oils-are used to remove Fe3+ contaminants from water. The sorbent is low-cost and sustainable, as it can be prepared entirely from waste. The preparation of this material using microwave heating and its application in iron capture are two important advances in the growing field of sulfur polymers.

Insights into the complexation of N-Allyl-4-(4-(N-phenylureido)benzylamino)-1,8-naphthalimide with various anions.

A new urea functionalised 4-amino-1,8-naphthalimide based fluorescent anion sensor was synthesised in 64% yield over three steps. Fluorescence and 1H NMR titrations showed that the sensor complexes strongly with acetate and dihydrogen phosphate and to a lesser extent bromide. The corresponding binding stoichiometries were examined using 1H NMR titrations. Results show that the sensor molecule initially forms 1:1 complexes through hydrogen bonding to the urea moiety, followed by secondary complexation to form higher order host:guest stoichiometries. Specifically, oxyanions complex to the sensor via hydrogen bonding through synergistic aryl C-H and N-H anion interactions in a 1:2 sensor:oxyanion arrangement. Furthermore, 2:1 sensor:oxyanion complexes are formed through an oxyanion linkage between two urea functionalities on different host molecules. This contrasts the majority of previous reports for similar hosts, which indicate 1:1 binding stoichiometry.

The synthesis and investigation of impurities found in Clandestine Laboratories: Baeyer-Villiger Route Part I; Synthesis of P2P from benzaldehyde and methyl ethyl ketone.

The synthesis of impurities detected in clandestinely manufactured Amphetamine Type Stimulants (ATS) has emerged as more desirable than simple "fingerprint" profiling. We have been investigating the impurities formed when phenyl-2-propanone (P2P) 5, a key ATS precursor, is synthesised in three steps; an aldol condensation of benzaldehyde and methyl ethyl ketone (MEK); a Baeyer-Villiger reaction; and ester hydrolysis. We have identified and selectively synthesised several impurities that may be used as route specific markers for this series of synthetic steps. Specifically these impurities are 3-methyl-4-phenyl-3-buten-2-one 3, 2-methyl-1,5-diphenylpenta-1,4-diene-3-one 9, 2-(methylamino)-3-methyl-4-phenyl-3-butene 16, 2-(Methylamino)-3-methyl-4-phenylbutane 17, and 1-(methylamino)-2-methyl-1,5-diphenylpenta-4-ene-3-one 22.

Mass spectrometry imaging reveals new biological roles for choline esters and Tyrian purple precursors in muricid molluscs.

Despite significant advances in chemical ecology, the biodistribution, temporal changes and ecological function of most marine secondary metabolites remain unknown. One such example is the association between choline esters and Tyrian purple precursors in muricid molluscs. Mass spectrometry imaging (MSI) on nano-structured surfaces has emerged as a sophisticated platform for spatial analysis of low molecular mass metabolites in heterogeneous tissues, ideal for low abundant secondary metabolites. Here we applied desorption-ionisation on porous silicon (DIOS) to examine in situ changes in biodistribution over the reproductive cycle. DIOS-MSI showed muscle-relaxing choline ester murexine to co-localise with tyrindoxyl sulfate in the biosynthetic hypobranchial glands. But during egg-laying, murexine was transferred to the capsule gland, and then to the egg capsules, where chemical ripening resulted in Tyrian purple formation. Murexine was found to tranquilise the larvae and may relax the reproductive tract. This study shows that DIOS-MSI is a powerful tool that can provide new insights into marine chemo-ecology.

SERS and NMR Studies of Typical Aggregation-Induced Emission Molecules.

Over recent decades, aggregation-induced emission (AIE) molecules have attracted increasing attention. Restriction of intramolecular rotation (RIR) has been widely accepted as the cause of the emission when AIE molecules aggregate into clusters. The intramolecular rotation of AIE molecules can be monitored by molecular vibration spectra such as nuclear magnetic resonance (NMR), infrared, and Raman, especially surface-enhanced Raman scattering (SERS) which has high sensitivity down to a single molecule. We employed SERS and NMR to study the AIE emission mechanism and compared experimental results with simulation data to monitor the RIR. Interestingly, we found that intramolecular rotation was also restricted for individual AIE molecules loaded onto SERS substrate surfaces due to the laid-down configuration.

Mechanistic insights into the luminescent sensing of organophosphorus chemical warfare agents and simulants using trivalent lanthanide complexes.

Organophosphorus chemical warfare agents (OP CWAs) are potent acetylcholinesterase inhibitors that can cause incapacitation and death within minutes of exposure, and furthermore are largely undetectable by the human senses. Fast, efficient, sensitive and selective detection of these compounds is therefore critical to minimise exposure. Traditional molecular-based sensing approaches have exploited the chemical reactivity of the OP CWAs, whereas more recently supramolecular-based approaches using non-covalent interactions have gained momentum. This is due, in part, to the potential development of sensors with second-generation properties, such as reversibility and multifunction capabilities. Supramolecular sensors also offer opportunities for incorporation of metal ions allowing for the exploitation of their unique properties. In particular, trivalent lanthanide ions are being increasingly used in the OP CWA sensing event and their use in supramolecular sensors is discussed in this Minireview. We focus on the fundamental interactions of simple lanthanide systems with OP CWAs and simulants, along with the development of more elaborate and complex systems including those containing nanotubes, polymers and gold nanoparticles. Whilst literature investigations into lanthanide-based OP CWA detection systems are relatively scarce, their unique and versatile properties provide a promising platform for the development of more efficient and complex sensing systems into the future.

Morphine glucuronidation and glucosidation represent complementary metabolic pathways that are both catalyzed by UDP-glucuronosyltransferase 2B7: kinetic, inhibition, and molecular modeling studies.

Morphine 3-ß-D-glucuronide (M3G) and morphine 6-ß-D-glucuronide (M6G) are the major metabolites of morphine in humans. More recently, morphine-3-ß-d-glucoside (M-3-glucoside) was identified in the urine of patients treated with morphine. Kinetic and inhibition studies using human liver microsomes (HLM) and recombinant UGTs as enzyme sources along with molecular modeling were used here to characterize the relationship between morphine glucuronidation and glucosidation. The M3G to M6G intrinsic clearance (C(Lint)) ratio (∼5.5) from HLM supplemented with UDP-glucuronic acid (UDP-GlcUA) alone was consistent with the relative formation of these metabolites in humans. The mean C(Lint) values observed for M-3-glucoside by incubations of HLM with UDP-glucose (UDP-Glc) as cofactor were approximately twice those for M6G formation. However, although the M3G-to-M6G C(Lint) ratio remained close to 5.5 when human liver microsomal kinetic studies were performed in the presence of a 1:1 mixture of cofactors, the mean C(Lint) value for M-3-glucoside formation was less than that of M6G. Studies with UGT enzyme-selective inhibitors and recombinant UGT enzymes, along with effects of BSA on morphine glycosidation kinetics, were consistent with a major role of UGT2B7 in both morphine glucuronidation and glucosidation. Molecular modeling identified key amino acids involved in the binding of UDP-GlcUA and UDP-Glc to UGT2B7. Mutagenesis of these residues abolished morphine glucuronidation and glucosidation. Overall, the data indicate that morphine glucuronidation and glucosidation occur as complementary metabolic pathways catalyzed by a common enzyme (UGT2B7). Glucuronidation is the dominant metabolic pathway because the binding affinity of UDP-GlcUA to UGT2B7 is higher than that of UDP-Glc.

VX and VG chemical warfare agents bidentate complexation with lanthanide ions.

Investigations into V-agent interaction with 1,10-phenanthroline nitrate Ln(III) complexes (Eu and Tb) were carried out using luminescence and UV-Vis spectroscopy. Addition of several equivalents of agent resulted in the loss of luminescence intensity and the observation of free 1,10-phenanthroline by UV-Vis. We propose a displacement mechanism in which the V-agent acts as a bidentate ligand to the lanthanide ion. Association constants were determined by luminescence titrations and found to be 10(5) mol(-1) dm(3).

Purified brominated indole derivatives from Dicathais orbita induce apoptosis and cell cycle arrest in colorectal cancer cell lines.

Dicathais orbita is a large Australian marine gastropod known to produce bioactive compounds with anticancer properties. In this research, we used bioassay guided fractionation from the egg mass extract of D. orbita using flash column chromatography and identified fractions containing tyrindoleninone and 6-bromoisatin as the most active against colon cancer cells HT29 and Caco-2. Liquid chromatography coupled with mass spectrometry (LCMS) and 1H NMR were used to characterize the purity and chemical composition of the isolated compounds. An MTT assay was used to determine effects on cell viability. Necrosis and apoptosis induction using caspase/LDH assay and flow cytometry (PI/Annexin-V) and cell cycle analysis were also investigated. Our results show that semi-purified 6-bromoisatin had the highest anti-cancer activity by inhibiting cell viability (IC50 = ~100 µM) and increasing caspase 3/7 activity in both of the cell lines at low concentration. The fraction containing 6-bromoisatin induced 77.6% apoptosis and arrested 25.7% of the cells in G2/M phase of cell cycle in HT29 cells. Tyrindoleninone was less potent but significantly decreased the viability of HT29 cells at IC50 = 390 µM and induced apoptosis at 195 µM by increasing caspase 3/7 activity in these cells. This research will facilitate the development of these molluscan natural products as novel complementary medicines for colorectal cancer.

29Si{1H} CP-MAS NMR comparison and ATR-FTIR spectroscopic analysis of the diatoms Chaetoceros muelleri and Thalassiosira pseudonana grown at different salinities.

Diatoms are key indicators of marine environmental health. To further understand how diatoms respond to varying degrees of salinity, either due to climate change or brine waste discharge into marine environments, two different diatom species were studied. Thalassiosira pseudonana and Chaetoceros muelleri were cultured at three different salinities namely, 26 practical salinity units (PSU or parts per thousand), 36 PSU (standard salinity for culturing of seawater species) and 46 PSU. Changes in silica and organic content within the cultured diatoms were analysed using solid-state (29)Si{(1)H} cross-polarization-magic angle spinning (CP-MAS) nuclear magnetic resonance (NMR) and attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopies coupled with analysis of variance. (29)Si CP-MAS NMR showed that qualitatively the Q4:Q3 area ratios of C. muelleri, grown away from standard salinities, increased in response to the formation of more condensed (2 ≡SiOH → ≡Si-O-Si≡ + H2O) and/or an increase in closely associated organic matter to the Q4 component of the diatoms. This was not observed for T. pseudonana. However, both species showed the appearance of a new peak centered at 1575-1580 cm(-1) in the ATR-FTIR spectra, designated as the C═N band of nitrogenous purine-type compounds. Further, the C. muelleri species was shown to produce more extracellular polymeric substances at non-standard salinities. On this basis, results suggest that there is a strong relationship between diatom composition and salinity and that C. muelleri is more sensitive to its environment than T. pseudonana.

Synthesis, structure, and biological applications of α-fluorinated ß-amino acids and derivatives.

This review gives a broad overview of the state of play with respect to the synthesis, conformational properties, and biological activity of α-fluorinated ß-amino acids and derivatives. General methods are described for the preparation of monosubstituted α-fluoro-ß-amino acids (Scheme 1). Nucleophilic methods for the introduction of fluorine predominantly involve the reaction of DAST with alcohols derived from α-amino acids, whereas electrophilic sources of fluorine such as NFSI have been used in conjunction with Arndt-Eistert homologation, conjugate addition or organocatalyzed Mannich reactions. α,α-Difluoro-ß-amino acids have also been prepared using DAST; however, this area of synthesis is largely dominated by the use of difluorinated Reformatsky reagents to introduce the difluoro ester functionality (Scheme 9). α-Fluoro-ß-amino acids and derivatives analyzed by X-ray crystal and NMR solution techniques are found to adopt preferred conformations which are thought to result from stereoelectronic effects associated with F located close to amines, amides, and esters (Figs. 2-6). α-Fluoro amide and ß-fluoro ethylamide/amine effects can influence the secondary structure of α-fluoro-ß-amino acid-containing derivatives including peptides and peptidomimetics (Figs. 7-9). α-Fluoro-ß-amino acids are also components of a diverse range of bioactive anticancer (e.g., 5-fluorouracil), antifungal, and antiinsomnia agents as well as protease inhibitors where such fluorinated analogs have shown increased potency and spectrum of activity.

Analysis of the hydrolysis of inulin using real time 1H NMR spectroscopy.

The hydrolysis of various carbohydrates was investigated under acidic conditions in real time by (1)H NMR spectroscopy, with a focus on the polysaccharide inulin. Sucrose was used as a model compound to illustrate the applicability of this technique. The hydrolysis of sucrose was shown to follow pseudo first order kinetics and have an activation energy of 107.0 kJ mol(-1) (SD 1.7 kJ mol(-1)). Inulin, pullulan and glycogen also all followed pseudo first order kinetics, but had an initiation phase at least partially generated by the protonation of the glycosidic bonds. It was also demonstrated that polysaccharide chain length has an effect on the hydrolysis of inulin. For short chain inulin (DPn 18, SD 0.70) the activation energy calculated for the hydrolytic cleavage of glucose was similar to sucrose at 108.5 kJ mol(-1) (SD 0.60). For long chain inulin (DPn 30, SD 1.3) the activation energy for the hydrolytic cleavage of glucose was reduced to 80.5 kJ mol(-1) (SD 2.3 kJ mol(-1)). This anomaly has been attributed to varied conformations for the two different lengths of inulin chain in solution.