Resonant-mode engineering for additive reflective structural colors with high brightness and high color purity.

We present quad-layered reflective structural color filters generating vivid additive primary colors by controlling a mode number in a Fabry-Perot (FP) cavity and an anti-reflective (AR) coating layer, thus accomplishing high spectral contrast which is highly demanded in creating sharp colors. The reflection brightness of fabricated structural color filters is over 78% and a color gamut is comparable to the standard color gamut (sRGB). Higher-order resonant modes are exploited yielding a narrow passband with strong suppression of the reflection at shorter and longer wavelength ranges for a green color, while red and blue colors are produced by employing fundamental resonant modes. Besides, the structural color filters maintain both high brightness and high color purity at oblique incidence angles up to 40° due to a small angle of refraction by a cavity medium with high refractive index. Moreover, a large-scale fabrication is enabled owing to the simplicity of a device structure, where thin film deposition is used. The scheme presented in this work may open the door to a number of applications, such as reflective displays, imaging devices, colored photovoltaics, and decorations.

Dielectric light-trapping nanostructure for enhanced light absorption in organic solar cells.

Dielectric scatterers where Mie resonances can be excited in both electric and magnetic modes have emerged as a promising candidate for efficient light trapping (LT) in thin-film solar cells. We present that light absorption in organic solar cells (OSCs) can be significantly enhanced by a front-sided incorporation of a core-shell nanostructure consisting of a high-refractive-index dielectric nanosphere array conformally coated with a low-refractive-index dielectric layer. Strong forward light scattering of the all-dielectric LT structure enables the absorption in an organic semiconductor to be remarkably boosted over a broad range of wavelengths, which is attributed to interference of a simultaneous excitation of the electric and magnetic dipole resonant modes. The OSC with the LT structure shows the short-circuit current density (Jsc) of 28.23 mA/cm2, which is 10% higher than that of a flat OSC. We also explore how the LT structure affects scattering cross-sections, spectral multipole resonances, and far-field radiation patterns. The approach described in this work could offer the possibility for the improvement of characteristic performances of various applications, such as other thin-film solar cells, photodiodes, light-emitting diodes, and absorbers.

Enhanced Photoluminescence of Crystalline Alq3 Micro-Rods Hybridized with Silver Nanowires.

An enhancement of the local electric field at the metal/dielectric interface of hybrid materials due to the localized surface plasmon resonance (LSPR) phenomenon plays a particularly important role in versatile research fields resulting in a distinct modification of the electrical, as well as optical, properties of the hybrid material. In this paper, we succeeded in visually confirming the LSPR phenomenon in the crystalline tris(8-hydroxyquinoline) aluminum (Alq3) micro-rod (MR) hybridized with silver (Ag) nanowire (NW) in the form of photoluminescence (PL) characteristics. Crystalline Alq3 MRs were prepared by a self-assembly method under the mixed solution of protic and aprotic polar solvents, which could be easily applied to fabricate hybrid Alq3/Ag structures. The hybridization between the crystalline Alq3 MRs and Ag NWs was confirmed by the component analysis of the selected area electronic diffraction attached to high-resolution transmission electron microscope. Nanoscale and solid state PL experiments on the hybrid Alq3/Ag structures using a lab-made laser confocal microscope exhibited a distinct enhancement of the PL intensity (approximately 26-fold), which also supported the LSPR effects between crystalline Alq3 MRs and Ag NWs.