Nonlinear ferroelectric characteristics of barium titanate nanocrystals determined via a polymer nanocomposite approach.

The growing demand for high energy storage materials has garnered substantial attention towards lead-free ferroelectric nanocrystals (NCs), such as BaTiO3 (BTO), for next-generation multilayer ceramic capacitors. Notably, it remains challenging to accurately measure the dielectric constant and polarization-electric field (P-E) hysteresis loop for BTO NCs. Herein, we report on nonlinear ferroelectric characteristics of BTO NCs via a polymer nanocomposite approach. Specifically, poly(vinyl pyrrolidone) (PVP)/BTO nanocomposite films of 3-10 µm thickness, containing 380 nm tetragonal-phased and 60 nm cubic-phased BTO NCs with uniform particle dispersion, were prepared. Theoretical deconvolution of the broad experimental P-E loops of the PVP/BTO NC composite films revealed three contributions, that is, the linear deformational polarization of the nanocomposites, the polarization of BTO NCs (Pp), and the polarization from strong particle-particle interactions. Using different mixing rules and nonlinear dielectric analysis, the overall dielectric constants of BTO NCs were obtained, from which the internal field in the BTO NCs (Ep) was estimated. Consequently, the Pp-Ep hysteresis loops were obtained for the BTO380 and BTO60 NCs. Interestingly, BTO380 exhibited square-shaped ferroelectric loops, whereas BTO60 displayed slim paraelectric loops. This work presents a robust and versatile route to extract the Pp-Ep loops of ferroelectric NCs from polymer/ceramic nanocomposites.

Effect of Glass Transition Temperature on Enhanced Dielectric Breakdown Strength and Lifetime of Multilayer Polymer Films.

High temperature, high energy density, and low loss dielectric films are promising candidates for miniaturized capacitors in electric vehicles and high-speed trains. However, single-component polymers could not achieve these desired properties simultaneously. Polymer multilayer films (MLFs), which combine a high dielectric constant polymer [e.g., poly(vinylidene fluoride) (PVDF)] and a high breakdown/low loss polymer [e.g., polycarbonate (PC)] in a unique layered structure, have the potential achieve them at the same time. In this work, the effects of PC glass transition temperature (Tg) on the dielectric insulation properties (breakdown strength and lifetime) were investigated at high temperatures of 100-150 °C. Three PC materials had Tg values of 145 (PC1), 165 (PC2), and 185 °C (PC3), respectively. It is observed that MLF-PC3 with the highest Tg of PC exhibited the highest Weibull direct/alternating current (DC/AC) breakdown strength and the longest DC/AC lifetime, whereas MLF-PC1 with the lowest Tg showed the lowest Weibull DC/AC breakdown strength and the shortest DC/AC lifetime. A high-temperature high-volage leakage current study revealed that MLF-PC3 exhibited the lowest bulk conductivity at all temperatures under different electric fields. The knowledge obtained from this study will help us design better MLFs with high performance for next-generation miniaturized capacitors.

Investigation into the crystal structure-dielectric property correlation in barium titanate nanocrystals of different sizes.

For high capacitance multilayer ceramic capacitors, high dielectric constant and lead-free ceramic nanoparticles are highly desired. However, as the particle size decreases to a few tens of nanometers, their dielectric constant significantly decreases, and the underlying mechanism has yet to be fully elucidated. Herein, we report a systematic investigation into the crystal structure-dielectric property relationship of combustion-made BaTiO3 (BTO) nanocrystals. When the nanocrystal size was 100 nm and below, a metastable paraelectric cubic phase was found in the as-received BTO (denoted as arBTO) nanocrystals based on an X-ray diffraction (XRD) study. A stable ferroelectric tetragonal phase was present when the nanocrystal size was above 200 nm. Notably, the cubic arBTO (particle size ≤100 nm) exhibited tetragonal fluctuations as revealed by Raman spectroscopy, whereas the tetragonal arBTO (particle size ≥200 nm) contained ∼10% cubic fraction according to the Rietveld fitting of the XRD profiles. Thermal annealing of the multi-grain tetragonal arBTO at 950 °C yielded single crystals of annealed BTO (denoted as anBTO), whose dielectric constants were higher than those of arBTO. However, the single crystalline anBTO prevented the formation of 90° domains; therefore, they exhibited a low dielectric constant of ∼300. Although X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy could not identify the exact structural defects, our study revealed that surface and bulk defects formed during synthesis affect the final crystal structures and thus the dielectric properties of BTO nanocrystals with different sizes. The understanding obtained from this study will help us design high dielectric constant perovskite nanocrystals for next-generation multilayer ceramic capacitor applications.

Fused Filament Fabrication 4D Printing of a Highly Extensible, Self-Healing, Shape Memory Elastomer Based on Thermoplastic Polymer Blends.

A polymer blend with high extensibility, exhibiting both shape memory and self-healing, was 4D printed using a low-cost fused filament fabrication (FFF, or fused deposition modeling, FDM) 3D printer. The material is composed of two commercially available commodity polymers, polycaprolactone (PCL), a semi-crystalline thermoplastic, and polystyrene-block-poly(ethylene-co-butylene)-block-polystyrene (SEBS), a thermoplastic elastomer. The shape memory and self-healing properties of the blends were studied systematically through thermo-mechanical and morphological characterization, providing insight into the shape memory mechanism useful for tuning the material properties. In 3D-printed articles, the orientation of the semi-crystalline and micro-phase-separated domains leads to improvement of the shape memory property and extensibility of this material compared to compression-molded samples. By controlling the orientation of the printed fibers, we achieved a high strain at break over 1200%, outperforming previously reported flexible 4D-printed materials. The self-healing agent, PCL, enables the material to heal scratches and cracks and adhere two surfaces after annealing at 80 °C for 30 min. The high performance, multi-functionality, and potential scalability make it a promising candidate for a broad spectrum of applications, including flexible electronics, soft actuators, and deployable devices.

Vitrimerization: Converting Thermoset Polymers into Vitrimers.

Thermoset polymers with permanently cross-linked networks have outstanding mechanical properties and solvent resistance, but they cannot be reprocessed or recycled. On the other hand, vitrimers with covalent adaptable networks can be recycled. Here we provide a simple and practical method coined as "vitrimerization" to convert the permanent cross-linked thermosets into vitrimer polymers without depolymerization. The vitrimerized thermosets exhibit comparable mechanical properties and solvent resistance with the original ones. This method allows recycling and reusing the unrecyclable thermoset polymers with minimum loss in mechanical properties and enables closed-loop recycling of thermosets with the least environmental impact.