Biomass-Derived Carbon Utilization for Electrochemical Energy Enhancement in Lithium-Ion Batteries.

Cathodes made of LiFePO4 (LFP) offer numerous benefits including being non-toxic, eco-friendly, and affordable. The distinctive olivine structure of LFP cathodes contributes to their electrochemical stability. Nonetheless, this structure is also the cause of their low ionic and electronic conductivity. To enhance these limitations, an uncomplicated approach has been effectively employed. A straightforward solid-state synthesis technique is used to apply a coating of biomass from potato peels to the LFP cathode, boosting its electrochemical capabilities. Potato peels contain pyridinic and pyrrolic nitrogen, which are conducive to ionic and electronic movement and facilitate pathways for lithium-ion and electron transfer, thus elevating electrochemical performance. When coated with nitrogen-doped carbon derived from potato peel biomass (PPNC@LFP), the LFP cathode demonstrates an improved discharge capacity of 150.39 mAh g-1 at a 0.1 C-rate and 112.83 mAh g-1 at a 1.0 C-rate, in contrast to the uncoated LFP which shows capacities of 141.34 mAh g-1 and 97.72 mAh g-1 at the same rates, respectively.

3D-Printed Silicone Substrates as Highly Deformable Electrodes for Stretchable Li-Ion Batteries.

Stretchable energy storage devices receive a considerable attention at present due to their growing demand for powering wearable electronics. A vital component in stretchable energy storage devices is its electrode which should endure a large and repeated number of mechanical deformations during its prolonged use. It is crucial to develop a technology to fabricate highly deformable electrode in an easy and an economic manner. Here, the fabrication of stretchable electrode substrates using 3D-printing technology is reported. The ink for fabricating it contains a mixture of sacrificial sugar particles and polydimethylsiloxane resin which solidifies upon thermal curing. The printed stretchable substrate attains a porous structure after leaching the sugar particles in water. The resulting printed porous stretchable substrates are then utilized as electrodes for Li-ion batteries (LIBs) after loading them with electrode materials. The batteries with stretchable electrodes exhibit a decent electrochemical performance comparable to that of the conventional electrodes. The stretchable electrodes also exhibit a stable electrochemical performance under various mechanical deformations and even after several hundreds of stretch/release cycles. This work provides a feasible route for constructing LIBs with high stretchability and enhanced electrochemical performance thereby providing a platform for realizing stretchable batteries for next generation wearable electronics.