Cuspal Shape Alterations by Bmp4 Directing Cell Proliferation and Apoptosis.

The enamel knot (EK), located at the center of cap stage tooth germs, is a transitory cluster of nondividing epithelial cells. The EK acts as a signaling center that provides positional information for tooth morphogenesis and regulates the growth of tooth cusps. To identify species-specific cuspal patterns, this study analyzed the cellular mechanisms in the EK that were related to bone morphogenetic protein (Bmp), which plays a crucial role in cell proliferation and apoptosis. To understand the cellular mechanisms in the EK, the differences between 2 species showing different cuspal patterning, mouse (pointy bunodont cusp) and gerbil (flat lophodont cusp), were analyzed with quantitative reverse transcriptase polymerase chain reaction and immunofluorescent staining. Based on these, we performed protein-soaked bead implantation on tooth germs of the 2 different EK regions and compared the cellular behavior in the EKs of the 2 species. Many genes related with cell cycle, cell apoptosis, and cell proliferation were involved in BMP signaling in the EK during tooth development. A comparison of the cell proliferation and apoptosis associated with Bmp revealed distinctive patterns of the cellular mechanisms. Our findings indicate that the cellular mechanisms, such as cell proliferation and apoptosis, in the EK are related to Bmp4 and play an important role in tooth morphogenesis.

Incidence of subsequent osteoporotic fractures after distal radius fractures and mortality of the subsequent distal radius fractures: a retrospective analysis of claims data of the Korea National Health Insurance Service.

A better understanding of the features of subsequent fractures after distal radius fracture (DRF) is important for the prevention of further osteoporotic fractures. This study found that the cumulative incidence of subsequent osteoporotic fractures in South Korea increased over time and that the mortality rates of subsequent DRFs were lower than those of first-time DRFs. INTRODUCTION: We examined the incidence of osteoporotic fractures following distal radius fractures (DRFs) and the mortality rate after subsequent DRFs using claims data from the Korea National Health Insurance (KNHI) Service. METHODS: We identified records for 41,417 patients with first-time DRFs in 2012. The occurrence of osteoporotic fractures of the spine, hip, wrist, and humerus at least 6 months after the index DRF was tracked through 2016. All fractures were identified by specific diagnosis and procedure codes. One-year mortality rates and standardized mortality ratios (SMRs) for initial and subsequent DRFs were calculated for all patients. RESULTS: The 4-year cumulative incidence of all subsequent osteoporotic fractures was 14.74% (6105/41,417; 9.47% in men, 15.9% in women). The number of associated subsequent fractures was 2850 for the spine (46.68%), 2271 for the wrist (37.2%), 708 for the hip (11.6%), and 276 for the humerus (4.52%). The cumulative mortality rate 1 year after the first-time and subsequent DRF was 1.47% and 0.71%, respectively, and the overall SMR was 1.48 (95% CI: 1.37-1.61) and 0.71 (95% CI: 0.42-1.21), respectively. CONCLUSION: The cumulative incidence of osteoporotic fractures following DRFs increased over the study period and was higher among women. The cumulative mortality rates and SMRs of subsequent DRFs were lower than those of first-time DRFs at the 1-year follow-up. Given the increasing incidence rate of DRFs, the incidence of subsequent osteoporotic fractures may also increase.

An Explanation for How FGFs Predict Species-Specific Tooth Cusp Patterns.

Species-specific cusp patterns result from the iterative formation of enamel knots, the epithelial signaling centers, at the future cusp positions. The expressions of fibroblast growth factors (FGFs), especially Fgf4, in the secondary enamel knots in the areas of the future cusp tips are generally used to manifest the appearance of species-specific tooth shapes. However, the mechanism underlying the predictive role of FGFs in species-specific cusp patterns remains obscure. Here, we demonstrated that gerbils, which have a lophodont pattern, exhibit a striped expression pattern of Fgf4, whereas mice, which have a bunodont pattern, have a spotted expression pattern, and these observations verify the predictive role of Fgf4 in species-specific cusp patterns. By manipulating FGFs' signaling in the inner dental epithelium of gerbils, we provide evidence for the intracellular participation of FGF signaling, specifically FGF4 and FGF20, in Rac1- and RhoA-regulated cellular geometry remolding during the determination of different cusp patterns. Our study presents a novel explanation of how different FGF expression patterns produce different cusp patterns and implies that a conserved intracellular FGF-GTPase signaling module might represent an underlying developmental basis for evolutionary changes in cusp patterns.

Diversification and enrichment of clinical biomaterials inspired by Darwinian evolution.

UNLABELLED: Regenerative medicine and biomaterials design are driven by biomimicry. There is the essential requirement to emulate human cell, tissue, organ and physiological complexity to ensure long-lasting clinical success. Biomimicry projects for biomaterials innovation can be re-invigorated with evolutionary insights and perspectives, since Darwinian evolution is the original dynamic process for biological organisation and complexity. Many existing human inspired regenerative biomaterials (defined as a nature generated, nature derived and nature mimicking structure, produced within a biological system, which can deputise for, or replace human tissues for which it closely matches) are without important elements of biological complexity such as, hierarchy and autonomous actions. It is possible to engineer these essential elements into clinical biomaterials via bioinspired implementation of concepts, processes and mechanisms played out during Darwinian evolution; mechanisms such as, directed, computational, accelerated evolutions and artificial selection contrived in the laboratory. These dynamos for innovation can be used during biomaterials fabrication, but also to choose optimal designs in the regeneration process. Further evolutionary information can help at the design stage; gleaned from the historical evolution of material adaptations compared across phylogenies to changes in their environment and habitats. Taken together, harnessing evolutionary mechanisms and evolutionary pathways, leading to ideal adaptations, will eventually provide a new class of Darwinian and evolutionary biomaterials. This will provide bioengineers with a more diversified and more efficient innovation tool for biomaterial design, synthesis and function than currently achieved with synthetic materials chemistry programmes and rational based materials design approach, which require reasoned logic. It will also inject further creativity, diversity and richness into the biomedical technologies that we make. All of which are based on biological principles. Such evolution-inspired biomaterials have the potential to generate innovative solutions, which match with existing bioengineering problems, in vital areas of clinical materials translation that include tissue engineering, gene delivery, drug delivery, immunity modulation, and scar-less wound healing. STATEMENT OF SIGNIFICANCE: Evolution by natural selection is a powerful generator of innovations in molecular, materials and structures. Man has influenced evolution for thousands of years, to create new breeds of farm animals and crop plants, but now molecular and materials can be molded in the same way. Biological molecules and simple structures can be evolved, literally in the laboratory. Furthermore, they are re-designed via lessons learnt from evolutionary history. Through a 3-step process to (1) create variants in material building blocks, (2) screen the variants with beneficial traits/properties and (3) select and support their self-assembly into usable materials, improvements in design and performance can emerge. By introducing biological molecules and small organisms into this process, it is possible to make increasingly diversified, sophisticated and clinically relevant materials for multiple roles in biomedicine.

The Grooved Rodent Incisor Recapitulates Rudimentary Teeth Characteristics of Ancestral Mammals.

It is known from the paleontology studies of eutherian mammals that incisor numbers were reduced during evolution. The evolutionary lost incisors may remain as vestigial structures at embryonic stages. The recapitulation of the incisor patterns among mammalian species will potentially uncover the mechanisms underlying the phenotypic transition of incisors during evolution. Here, we showed that a minute tooth formed in the presumptive groove region of the gerbil upper incisor at the early developmental stages, during which multiple epithelial swellings and Shh transcription domains spatiotemporally appeared in the dental epithelium, suggests the existence of vestigial dental primordia. Interestingly, when we trimmed the surrounding mesenchyme from incisor tooth germs at or before the bud stage prior to ex vivo culture, the explants developed different incisor phenotypes ranging from triplicated incisors, duplicated incisors, to Lagomorpha-like incisors, corresponding to the incisor patterns in the eutherian mammals. These results imply that the phenotypic transition of incisors during evolution, as well as the achievement of ultimate incisors in adults, arose from differential integrations of primordia. However, when the incisor tooth germ was trimmed at the cap stage, a grooved incisor developed similar to the normal condition. Furthermore, the incisor tooth germ developed a small but smooth incisor after the additional removal of the minute tooth and a lateral rudiment. These results suggest that multiple dental primordia integrated before the cap stage, with the labial primordia contributing to the labial face of the functional incisor. The minute tooth that occupied the boundary of the 2 labial primordia might be implicated in the groove formation. This study sheds light on how rudiments incorporate into functional organs and aids the understanding of incisor evolution.

Bioinspired materials for regenerative medicine: going beyond the human archetypes.

The evolution of life has given rise to innumerable biomaterials with high levels of functional sophistication and performance among many thousands of different environments. The inexhaustible range of strategies and the intrinsic good design they possess can be readily included in the design of biomedical devices and materials, such as wound healing bandages and antibacterial surface coating implants. We highlight topical examples where various ingenious design strategies from biological models, originating more broadly from zoology and botany, have been appropriated into novel synthetic materials and structures for regenerative and material-based tissue engineering. Bioinspired materials engineering informed and enriched by the vast array of adaptations and strategies in nature, beyond human biology, will be instrumental in the future evolution of new more clinically acceptable pan-functional materials and structures with a broad range of uses in the regenerative sciences.

CXXC5 is a negative-feedback regulator of the Wnt/ß-catenin pathway involved in osteoblast differentiation.

The positive roles of the Wnt/ß-catenin pathway in osteoblast differentiation and bone mineral density (BMD) maintenance have been clearly demonstrated in both animal experiments and clinical investigations. CXXC finger protein 5 (CXXC5), a recently identified negative regulator of the Wnt/ß-catenin pathway, showed altered cellular localization and function, which were dependent on the cell type in previous studies. However, the in vivo function of CXXC5 has not been clearly investigated yet. Here, we characterized CXXC5 as a negative regulator of osteoblast differentiation and bone formation. Deficiency of CXXC5 resulted in elevated BMD in mice without any severe gross developmental abnormalities. CXXC5 exerted a negative-feedback effect on the Wnt/ß-catenin pathway via Wnt-dependent binding to Dishevelled (Dvl) during osteoblast differentiation. Suppression of the Dvl-CXXC5 interaction using a competitor peptide resulted in the activation of the Wnt/ß-catenin pathway and osteoblast differentiation, and accelerated thickness growth of ex vivo-cultured calvariae. Overall, CXXC5 is a negative-feedback regulator induced by Wnt/ß-catenin signaling that inhibits osteoblast differentiation and bone formation via interaction with Dvl.

Advanced functional polymers for regenerative and therapeutic dentistry.

Use of ceramics and polymers continues to dominate clinical procedures in modern dentistry. Polymers have provided the basis for adhesives, tissue void fillers, and artificial replacements for whole teeth. They have been remarkably effective in the clinic at restoration of major dental functions after damage or loss of teeth. With the rapid development of polymer science, dental materials science has significantly lagged behind in harnessing these advanced polymer products. What they offer is new and unique properties superior to traditional polymers and crucially a range of properties that more closely match natural biomaterials. Therefore, we should pursue more vigorously the benefits of advanced polymers in dentistry. In this review, we highlight how the latest generation of advanced polymers will enhance the application of materials in the dental clinic using numerous promising examples. Polymers have a broad range of applications in modern dentistry. Some major applications are to construct frameworks that mimic the precise structure of tissues, to restore tooth organ function, and to deliver bioactive agents to influence cell behavior from the inside. The future of polymers in dentistry must include all these new enhancements to increase biological and clinical effectiveness beyond what can be achieved with traditional biomaterials.

Alteration of conserved alternative splicing in AMELX causes enamel defects.

Tooth enamel is the most highly mineralized tissue in vertebrates. Enamel crystal formation and elongation should be well controlled to achieve an exceptional hardness and a compact microstructure. Enamel matrix calcification occurs with several matrix proteins, such as amelogenin, enamelin, and ameloblastin. Among them, amelogenin is the most abundant enamel matrix protein, and multiple isoforms resulting from extensive but well-conserved alternative splicing and postsecretional processing have been identified. In this report, we recruited a family with a unique enamel defect and identified a silent mutation in exon 4 of the AMELX gene. We show that the mutation caused the inclusion of exon 4, which is almost always skipped, in the mRNA transcript. We further show, by generating and characterizing a transgenic animal model, that the alteration of the ratio and quantity of the developmentally conserved alternative splicing repertoire of AMELX caused defects in enamel matrix mineralization.

ß-Decay half-lives of 76,77Co, 79,80Ni, and 81Cu: experimental indication of a doubly magic 78Ni.

The half-lives of 20 neutron-rich nuclei with Z=27-30 have been measured at the RIBF, including five new half-lives of (76)Co(21.7(-4.9)(+6.5) ms), (77)Co(13.0(-4.3)(+7.2) ms), (79)Ni(43.0(-7.5)(+8.6) ms), (80)Ni(23.9(-17.2)(+26.0) ms), and (81)Cu(73.2 ± 6.8 ms). In addition, the half-lives of (73-75)Co, (74-78)Ni, (78-80)Cu, and (80-82)Zn were determined with higher precision than previous works. Based on these new results, a systematic study of the ß-decay half-lives has been carried out, which suggests a sizable magicity for both the proton number Z = 28 and the neutron number N=50 in (78)Ni.

Contribution of mesenchymal proliferation in tooth root morphogenesis.

In mouse tooth development, the roots of the first lower molar develop after crown formation to form 2 cylindrical roots by post-natal day 5. This study compared the morphogenesis and cellular events of the mesial-root-forming (MRF) and bifurcation-forming (BF) regions, located in the mesial and center of the first lower molar, to better define the developmental mechanisms involved in multi-rooted tooth formation. We found that the mesenchyme in the MRF showed relatively higher proliferation than the bifurcation region. This suggested that spatially regulated mesenchymal proliferation is required for creating cylindrical root structure. The mechanism may involve the mesenchyme forming a physical barrier to epithelial invagination of Hertwig's epithelial root sheath. To test these ideas, we cultured roots in the presence of pharmacological inhibitors of microtubule and actin polymerization, nocodazole and cytochalasin-D. Cytochalasin D also inhibits proliferation in epithelium and mesenchyme. Both drugs resulted in altered morphological changes in the tooth root structures. In particular, the nocodazole- and cytochalasin-D-treated specimens showed a loss of root diameter and formation of a single-root, respectively. Immunolocalization and three-dimensional reconstruction results confirmed these mesenchymal cellular events, with higher proliferation in MRF in multi-rooted tooth formation.

Efficacy and safety of pharmacotherapy for smoking cessation among pregnant smokers: a meta-analysis.

BACKGROUND: The efficacy and safety of pharmacotherapy for smoking cessation among pregnant smokers has not yet been established. OBJECTIVE: To investigate the efficacy and safety of pharmacotherapy for smoking cessation among pregnant smokers. SEARCH STRATEGY: A search was made of PubMed, Embase and CENTRAL in June 2011. SELECTION CRITERIA: Randomised controlled trials (RCTs), quasi-RCTs and retrospective or prospective controlled studies were included. DATA COLLECTION AND ANALYSIS: The main analyses were designed to examine the efficacy of pharmacotherapy for smoking cessation among pregnant smokers based on the longest follow-up data available and from data obtained at the latest available time-point in pregnancy in each study. MAIN RESULTS: Of 74 articles identified from the databases, seven studies (five RCTs, one quasi-RCT and one prospective study) involving a total of 1386 pregnant smokers, 732 in the intervention groups and 654 in the control groups, were included in the final analyses. In a fixed-effects meta-analysis of all seven studies based on the longest follow-up data available, pharmacotherapy had a significant effect on smoking cessation (relative risk [RR] 1.80; 95% confidence interval [CI] 1.32-2.44). Subgroup meta-analysis by type of study design also showed similar findings for RCTs (RR 1.48; 95% CI 1.04-2.09) and other types of studies (RR 3.25; 95% CI 1.65-6.39). The abstinence rate at late pregnancy in the intervention ranged from 7 to 22.6% (mean abstinence rate 13.0%; 95% CI 10.9-15.2%). A few minor adverse effects and serious adverse effects were reported in several studies. AUTHOR'S CONCLUSIONS: This study indicates that there may be clinical evidence to support the use of pharmacotherapy for smoking cessation among pregnant smokers. Further RCTs are needed.

Fulminant amoebic colitis mimicking intestinal vasculitis in a patient with systemic lupus erythematosus.

Colitis in patients with systemic lupus erythematosus (SLE) is quite rare. It can be caused by intestinal vasculitis, mesenteric vascular thrombosis, concomitant inflammatory bowel disease or infectious colitis. It is important to make an accurate and early diagnosis as the treatments for each condition differ and a delayed diagnosis can result in life-threatening complications. However, non-specific gastrointestinal symptoms make a timely diagnosis challenging. Amoebic colitis is a rare condition in patients with SLE. Here we present a case of fulminant amoebic colitis in a patient with SLE which was initially misdiagnosed as ischemic colitis due to intestinal vasculitis. Her colitis was complicated with multiple intestinal perforations, disseminated intravascular coagulation and acute respiratory distress syndrome; but in the end, the patient was successfully treated with metronidazole and paromomycin.

Effect of continuous cuff pressure regulator in general anaesthesia with laryngeal mask airway.

Postoperative pharyngolaryngeal complications (PPLC) occur during anaesthesia due to increased cuff pressure following the insertion of laryngeal mask airways. The use of a pressure regulator to prevent PPLC was evaluated in a prospective, randomized study. Sixty patients scheduled to receive general anaesthesia were randomly assigned to two equal groups of 30, either with or without the regulator. The 'just seal' cuff pressure (JSCP), cuff pressure at 5-min intervals during anaesthesia, incidence of pharyngeal sore throat (PST), dysphagia, dysphonia and other complications were evaluated at 1 and 24 h postoperatively. The combined mean ± SD JSCP of both groups was 20.3 ± 3.2 mmHg. In the group with the regulator, cuff pressure was maintained at a constant level during anaesthesia. This study demonstrated that the regulator is a simple, functional device that can reduce the incidence of PST significantly at 1 h postoperatively, following general anaesthesia.

Effect of alendronate on healing of extraction sockets and healing around implants.

OBJECTIVES: The purpose of this study was to evaluate the effect of alendronates on healing of extraction sockets and healing around implants in the maxilla of rats. MATERIALS AND METHODS: Twenty-four Sprague-Dawley rats were used. The rats in bisphosphonate group were subcutaneously injected with alendronate (5.0 mg kg(--1)) three times a week for 4 weeks. Both sides of the maxillary first molars were extracted, and customized titanium implants (Ø1.5 × 2.0 mm) were placed immediately into one side. Rats were killed at 3, 7, 14, or 28 days following surgery. RESULTS: New bone formation in extraction sockets, bone area around the implant site, and bone-implant contact were not delayed in the bisphosphonate group. The tartrate-resistant acid phosphatase positive cell count did not differ between bisphosphonate and control groups; however, empty lacunae were observed significantly more in bisphosphonate group. The differences in empty lacunae were shown at different time points between the implant sites and extraction sites: at 7 days after extraction, and at 14 and 28 days after implantation. CONCLUSIONS: Alendronates seemed to decrease bone resorption but not to decrease bone formation. Empty lacunae were observed significantly more at later time points in implant sites compared to extraction sockets.

Down-regulated genes in mouse dental papillae and pulp.

Important factors involved in odontogenesis in mouse dental papillae disappear between the pre- and post-natal stages of development. Therefore, we hypothesized that certain genes involved in odontogenesis in dental papillae were subject to pre-/post-natal down-regulation. Our goal was to identify, by microarray analysis, which genes were down-regulated. Dental papillae were isolated from embryonic 16-day-, 18-day- (E16, E18), and post-natal 3-day-old (P3) murine first mandibular molar germs and analyzed by microarray. The number of down-regulated genes was 2269 between E16 and E18, and 3130 between E18 and P3. Drastic down-regulation (fold change > 10.0) of Adamts4, Aldha1a2, and Lef1 was observed at both E16 and E18, and quantitative RT-PCR revealed a post-natal reduction in their expression (Adamts4, 1/3; Aldh1a2, 1/13; and Lef1, 1/37). These results suggest that down-regulation of these three genes is an important factor in normal odontogenesis in dental papillae.

Runx3 is required for the differentiation of lung epithelial cells and suppression of lung cancer.

Human lung adenocarcinoma, the most prevalent form of lung cancer, is characterized by many molecular abnormalities. K-ras mutations are associated with the initiation of lung adenocarcinomas, but K-ras-independent mechanisms may also initiate lung tumors. Here, we find that the runt-related transcription factor Runx3 is essential for normal murine lung development and is a tumor suppressor that prevents lung adenocarcinoma. Runx3-/- mice, which die soon after birth, exhibit alveolar hyperplasia. Importantly, Runx3-/- bronchioli exhibit impaired differentiation, as evidenced by the accumulation of epithelial cells containing specific markers for both alveolar (that is SP-B) and bronchiolar (that is CC10) lineages. Runx3-/- epithelial cells also express Bmi1, which supports self-renewal of stem cells. Lung adenomas spontaneously develop in aging Runx3+/- mice ( approximately 18 months after birth) and invariably exhibit reduced levels of Runx3. As K-ras mutations are very rare in these adenomas, Runx3+/- mice provide an animal model for lung tumorigenesis that recapitulates the preneoplastic stage of human lung adenocarcinoma development, which is independent of K-Ras mutation. We conclude that Runx3 is essential for lung epithelial cell differentiation, and that downregulation of Runx3 is causally linked to the preneoplastic stage of lung adenocarcinoma.

Immunolocalization of laminin and integrin in regenerating junctional epithelium of mice after gingivectomy.

BACKGROUND AND OBJECTIVE: The expression patterns of adhesive proteins and extracellular matrix proteins in regenerating gingival epithelium after gingivectomy are unknown. The aim of this study was to examine the expression of laminin 1, laminin gamma(2) (a specific component of laminin 5), integrin beta(4) and integrin alpha(3) in the regenerating gingival epithelium in order to understand the mechanism of wound healing during reconstitution of the sulcular environment. MATERIAL AND METHODS: The palatal gingivae of the maxillary molars of Institute of Cancer Research mice were excised, and the regenerating tissues were examined 1, 3, 5, 7 and 14 days later. Fresh, non-fixed and non-decalcified frozen sections were prepared and stained using immunofluorescence. RESULTS: At 1 day post-surgery, intense expression of laminin gamma(2), integrin beta(4) and integrin alpha(3) was distinct in the frontal margin of the regenerating oral epithelium. Laminin gamma(2) was diffusely detected on the root surface and in connective tissues beneath the regenerating oral epithelium at 3 and 5 days. At 7 days, laminin gamma(2) was intermittently recognizable in the internal basal lamina (IBL) close to tooth-facing cells, while laminin gamma(2), integrin beta(4) and integrin alpha(3) were observed in the IBL and in the external basal lamina (EBL) of the regenerating junctional epithelium at 14 days. CONCLUSION: These results suggest that secretion of laminin 5 in the connective tissue may induce epithelial cell migration, and that binding of laminin 5 to integrin alpha(6)beta(4) and integrin alpha(3)beta(1) in the IBL may provoke cell adhesion and migration of cells facing the tooth on the enamel surface of the regenerating junctional epithelium.

Involvement of laminin and integrins in adhesion and migration of junctional epithelium cells.

BACKGROUND AND OBJECTIVE: The junctional epithelium attaches to the enamel surface with hemidesmosomes (of which laminin-5 and integrin-alpha(6)beta(4) are the main components) in the internal basal lamina. Laminin-5 is also involved in cell motility with integrin-alpha(3)beta(1), although their functions have not yet been clarified.The purpose of this study was to determine the functions of those adhesive components between the tooth and the junctional epithelium during cell migration.Because an idea has been proposed that directly attached to tooth cells (DAT cells) may not contribute to cell migration, 5-bromo-2-deoxyuridine staining was performed to confirm cell migration. MATERIAL AND METHODS: We investigated laminin-gamma(2) (contained only in laminin-5), integrin-beta(4) (involved in cell-extracellular matrix contact) and integrin-alpha(3) (inducing cell migration) in the junctional epithelium, oral gingival epithelium and gingival sulcus epithelium of 6-wk-old ICR mice using laser microdissection, quantitative real-time reverse transcription-polymerase chain reaction, immunofluorescence and 5-bromo-2-deoxyuridine staining. RESULTS: Laminin and integrins were clearly immuno-localized in the basal lamina of all epithelium. Quantitative analysis of laminin and integrin mRNAs by laser microdissection showed that they were more highly expressed in DAT cells than in basal cells in the oral gingival epithelium. In particular, a 12-fold higher expression of laminin-5 was observed in the junctional epithelium compared with the oral gingival epithelium. 5-Bromo-2-deoxyuridine staining showed rapid coronal migration of DAT cells. CONCLUSION: These results suggest that the abundant expression of laminin-5 and integrin-alpha(6)beta(4) is involved in the attachment of DAT cells to teeth by hemidesmosomes. Abundant expression of laminin-5 and integrin-alpha(3)beta(1) might assist in DAT cell migration, confirmed by 5-bromo-2-deoxyuridine staining during the turnover of junctional epithelium.

Growth effects of botulinum toxin type A injected into masseter muscle on a developing rat mandible.

OBJECTIVES: Botulinum toxin type A (BTX-A) reduces the muscular contractions by temporarily inhibiting the release of acetylcholine at the neuromuscular junction. The purpose of this study was to investigate the effects of the BTX-A injected into the masseter muscle of a developing rat mandible. MATERIALS AND METHODS: Four-week-old male (no. 80) Sprague-Dawley rats were divided into four groups: control group, saline group, BTX-A group and baseline control group. Rats of baseline group were sacrificed at 0 day to provide baseline values of the mandibular measurements. The masseter muscle of rats in the saline and the BTX-A group were administered with saline and BTX-A solutions respectively. Experimental animals were sacrificed after 4 weeks. RESULTS: The BTX-A group demonstrated smaller mandibular dimension compared with the other groups (P < 0.05). Their condylar cartilages showed increased apoptosis at the proliferation stage of the reserve zone and masseter muscle fibers demonstrated atrophic changes. CONCLUSIONS: The result demonstrated BTX-A influence on inhibitory action of the developing mandible because of apoptosis at the proliferation stage of the reserve zone of the condylar cartilage in developing rat mandible.