Prismatic Ge-rich inclusions in the hexagonal SiGe shell of GaP-Si-SiGe nanowires by controlled faceting.

Formation of Ge-rich prismatic inclusions in the hexagonal SiGe shell of GaP-Si-SiGe nanowires is reported and discussed in relation to a growth model that explains their origin. An accurate TEM/EDX analysis shows that such prisms develop right on top of any {112[combining macron]0} facet present on the inner GaP-Si surface, with the base matching the whole facet extension, as large as tens of nanometers, and extending within the SiGe shell up to a thickness of comparable size. An enrichment in Ge by around 5% is recognized within such regions. A phase-field growth model, tackling both the morphological and compositional evolution of the SiGe shell during growth, is exploited to assess the mechanism behind the prism formation. A kinetic segregation process, stemming from the difference in surface mobility between Ge (faster) and Si (slower), is shown to take place, in combination with the evolution of the SiGe shell morphology. Actually, the latter moves from the one templated by the underlying GaP-Si core, including both {101[combining macron]0} and {112[combining macron]0} facets, to the more energetically convenient hexagon, bounded by {101[combining macron]0} facets only. Simulations are shown to accurately reproduce the experimental observations for both regular and asymmetric nanowires. It is then discussed how a careful control of the GaP core faceting, as well as a proper modulation of the shell growth rate, allows for direct control of the appearance and size of the Ge-rich prisms. This tunability paves the way for a possible exploitation of these lower-gap regions for advanced designs of band-gap-engineering.

Direct-bandgap emission from hexagonal Ge and SiGe alloys.

Silicon crystallized in the usual cubic (diamond) lattice structure has dominated the electronics industry for more than half a century. However, cubic silicon (Si), germanium (Ge) and SiGe alloys are all indirect-bandgap semiconductors that cannot emit light efficiently. The goal1 of achieving efficient light emission from group-IV materials in silicon technology has been elusive for decades2-6. Here we demonstrate efficient light emission from direct-bandgap hexagonal Ge and SiGe alloys. We measure a sub-nanosecond, temperature-insensitive radiative recombination lifetime and observe an emission yield similar to that of direct-bandgap group-III-V semiconductors. Moreover, we demonstrate that, by controlling the composition of the hexagonal SiGe alloy, the emission wavelength can be continuously tuned over a broad range, while preserving the direct bandgap. Our experimental findings are in excellent quantitative agreement with ab initio theory. Hexagonal SiGe embodies an ideal material system in which to combine electronic and optoelectronic functionalities on a single chip, opening the way towards integrated device concepts and information-processing technologies.

Hard Superconducting Gap and Diffusion-Induced Superconductors in Ge-Si Nanowires.

We show a hard superconducting gap in a Ge-Si nanowire Josephson transistor up to in-plane magnetic fields of 250 mT, an important step toward creating and detecting Majorana zero modes in this system. A hard gap requires a highly homogeneous tunneling heterointerface between the superconducting contacts and the semiconducting nanowire. This is realized by annealing devices at 180 °C during which aluminum interdiffuses and replaces the germanium in a section of the nanowire. Next to Al, we find a superconductor with lower critical temperature (TC = 0.9 K) and a higher critical field (BC = 0.9-1.2 T). We can therefore selectively switch either superconductor to the normal state by tuning the temperature and the magnetic field and observe that the additional superconductor induces a proximity supercurrent in the semiconducting part of the nanowire even when the Al is in the normal state. In another device where the diffusion of Al rendered the nanowire completely metallic, a superconductor with a much higher critical temperature (TC = 2.9 K) and critical field (BC = 3.4 T) is found. The small size of these diffusion-induced superconductors inside nanowires may be of special interest for applications requiring high magnetic fields in arbitrary direction.

Phonon Engineering in Twinning Superlattice Nanowires.

One of the current challenges in nanoscience is tailoring the phononic properties of a material. This has long been a rather elusive task because several phonons have wavelengths in the nanometer range. Thus, high quality nanostructuring at that length-scale, unavailable until recently, is necessary for engineering the phonon spectrum. Here we report on the continuous tuning of the phononic properties of a twinning superlattice GaP nanowire by controlling its periodicity. Our experimental results, based on Raman spectroscopy and rationalized by means of ab initio theoretical calculations, give insight into the relation between local crystal structure, overall lattice symmetry, and vibrational properties, demonstrating how material engineering at the nanoscale can be successfully employed in the rational design of the phonon spectrum of a material.

Observation of Conductance Quantization in InSb Nanowire Networks.

Majorana zero modes (MZMs) are prime candidates for robust topological quantum bits, holding a great promise for quantum computing. Semiconducting nanowires with strong spin orbit coupling offer a promising platform to harness one-dimensional electron transport for Majorana physics. Demonstrating the topological nature of MZMs relies on braiding, accomplished by moving MZMs around each other in a certain sequence. Most of the proposed Majorana braiding circuits require nanowire networks with minimal disorder. Here, the electronic transport across a junction between two merged InSb nanowires is studied to investigate how disordered these nanowire networks are. Conductance quantization plateaus are observed in most of the contact pairs of the epitaxial InSb nanowire networks: the hallmark of ballistic transport behavior.

InSb Nanowires with Built-In GaxIn1-xSb Tunnel Barriers for Majorana Devices.

Majorana zero modes (MZMs), prime candidates for topological quantum bits, are detected as zero bias conductance peaks (ZBPs) in tunneling spectroscopy measurements. Implementation of a narrow and high tunnel barrier in the next generation of Majorana devices can help to achieve the theoretically predicted quantized height of the ZBP. We propose a material-oriented approach to engineer a sharp and narrow tunnel barrier by synthesizing a thin axial segment of GaxIn1-xSb within an InSb nanowire. By varying the precursor molar fraction and the growth time, we accurately control the composition and the length of the barriers. The height and the width of the GaxIn1-xSb tunnel barrier are extracted from the Wentzel-Kramers-Brillouin (WKB) fits to the experimental I-V traces.

Atomic Layer Deposition of In2O3:H from InCp and H2O/O2: Microstructure and Isotope Labeling Studies.

The atomic layer deposition (ALD) process of hydrogen-doped indium oxide (In2O3:H) using indium cyclopentadienyl (InCp) and both O2 and H2O as precursors is highly promising for the preparation of transparent conductive oxides. It yields a high growth per cycle (>0.1 nm), is viable at temperatures as low as 100 °C, and provides a record optoelectronic quality after postdeposition crystallization of the films ( ACS Appl. Mat. Interfaces , 2015 , 7 , 16723 - 16729 , DOI: 10.1021/acsami.5b04420 ) . Since both the dopant incorporation and the film microstructure play a key role in determining the optoelectronic properties, both the crystal growth and the incorporation of the hydrogen dopant during this ALD process are studied in this work. This has been done using transmission electron microscopy (TEM) and atom probe tomography (APT) in combination with deuterium isotope labeling. TEM studies show that an amorphous-to-crystalline phase transition occurs in the low-temperature regime (100-150 °C), which is accompanied by a strong decrease in carrier density and an increase in carrier mobility. At higher deposition temperatures (>200 °C), enhanced nucleation of crystals and the incorporation of carbon impurities lead to a reduced grain size and even an amorphous phase, respectively, resulting in a strong reduction in carrier mobility. APT studies on films grown with deuterated water show that the incorporated hydrogen mainly originates from the coreactant and not from the InCp precursor. In addition, it was established that the incorporation of hydrogen decreased from ∼4 atom % for amorphous growth to ∼2 atom % after the transition to crystalline film growth.

Influence of growth conditions on the performance of InP nanowire solar cells.

Nanowire based solar cells have attracted great attention due to their potential for high efficiency and low device cost. Photovoltaic devices based on InP nanowires now have characteristics comparable to InP bulk solar cells. A detailed and direct correlation of the influence of growth conditions on performance is necessary to improve efficiency further. We explored the effects of the growth temperature, and of the addition of HCl during growth, on the efficiency of nanowire array based solar cell devices. By increasing HCl, the saturation dark current was reduced, and thereby the nanowire solar cell efficiency was enhanced from less than 1% to 7.6% under AM 1.5 illumination at 1 sun. At the same time, we observed that the solar cell efficiency decreased by increasing the tri-methyl-indium content, strongly suggesting that these effects are carbon related.

High-purity 3D nano-objects grown by focused-electron-beam induced deposition.

To increase the efficiency of current electronics, a specific challenge for the next generation of memory, sensing and logic devices is to find suitable strategies to move from two- to three-dimensional (3D) architectures. However, the creation of real 3D nano-objects is not trivial. Emerging non-conventional nanofabrication tools are required for this purpose. One attractive method is focused-electron-beam induced deposition (FEBID), a direct-write process of 3D nano-objects. Here, we grow 3D iron and cobalt nanopillars by FEBID using diiron nonacarbonyl Fe2(CO)9, and dicobalt octacarbonyl Co2(CO)8, respectively, as starting materials. In addition, we systematically study the composition of these nanopillars at the sub-nanometer scale by atom probe tomography, explicitly mapping the homogeneity of the radial and longitudinal composition distributions. We show a way of fabricating high-purity 3D vertical nanostructures of ∼50 nm in diameter and a few micrometers in length. Our results suggest that the purity of such 3D nanoelements (above 90 at% Fe and above 95 at% Co) is directly linked to their growth regime, in which the selected deposition conditions are crucial for the final quality of the nanostructure. Moreover, we demonstrate that FEBID and the proposed characterization technique not only allow for growth and chemical analysis of single-element structures, but also offers a new way to directly study 3D core-shell architectures. This straightforward concept could establish a promising route to the design of 3D elements for future nano-electronic devices.

Hexagonal Silicon Realized.

Silicon, arguably the most important technological semiconductor, is predicted to exhibit a range of new and interesting properties when grown in the hexagonal crystal structure. To obtain pure hexagonal silicon is a great challenge because it naturally crystallizes in the cubic structure. Here, we demonstrate the fabrication of pure and stable hexagonal silicon evidenced by structural characterization. In our approach, we transfer the hexagonal crystal structure from a template hexagonal gallium phosphide nanowire to an epitaxially grown silicon shell, such that hexagonal silicon is formed. The typical ABABAB... stacking of the hexagonal structure is shown by aberration-corrected imaging in transmission electron microscopy. In addition, X-ray diffraction measurements show the high crystalline purity of the material. We show that this material is stable up to 9 GPa pressure. With this development, we open the way for exploring its optical, electrical, superconducting, and mechanical properties.