Effect of Laser-Activated Irrigation on the Push-Out Bond Strength of ProRoot Mineral Trioxide Aggregate and Biodentine in Furcal Perforations.

OBJECTIVE: The objective of the present study was to assess the effect of erbium, chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser-activated irrigation (LAI) of NaOCl on the push-out bond strength of furcal perforations repaired with ProRoot mineral trioxide aggregate (MTA) and Biodentine. BACKGROUND DATA: Several studies investigated the adhesion of calcium silicate-based cements after exposure to endodontic irrigants, while effect of LAI on bond strength remains to be elucidated. MATERIALS AND METHODS: Bur-cut furcal perforations with standard dimensions were created in 100 extracted human mandibular molars. Teeth were randomly distributed into two groups (n = 50/group) according to the repair material applied: (1) ProRoot MTA or (2) Biodentine. The specimens were further assigned into five subgroups according to the irrigation regimens used over the set materials: (a) distilled water with needle irrigation; (b) 5.25% NaOCl with needle irrigation; (c) distilled water with LAI; (d) 5.25% NaOCl with LAI; and (e) no irrigation (control). Bond strengths of the test materials were assessed by using push-out bond strength test. RESULTS: Biodentine showed significantly higher dislocation resistance than ProRoot MTA (p < 0.05). Laser activation of 5.25% NaOCl and distilled water did not significantly affect the push-out bond strength results (p > 0.05). CONCLUSIONS: Biodentine showed higher dislocation resistance than ProRoot MTA as a perforation repair material. Er,Cr:YSGG laser activation of irrigation aqueous solutions had no adverse effect on push-out bond strength of Biodentine and ProRoot MTA.

In Vitro Cytotoxicity of Calcium Silicate-Based Endodontic Cement as Root-End Filling Materials.

The aim of this study was to evaluate the cytotoxicity of three types of calcium silicate-based endodontic cement after different incubation periods with human periodontal ligament fibroblasts. Human periodontal ligament fibroblasts were cultured from extracted third molars and seeded in 96-well plates. MTA, calcium enriched mixture (CEM) cement, and Biodentine were prepared and added to culture insert plates which were immediately placed into 96-well plates containing cultured cells. After incubation periods of 24, 48, and 72 hours, cell viability was determined with WST-1 assay. Data were analysed statistically by ANOVA with repeated measures and Bonferroni tests. There was no significant difference in cell viability amongst the test materials after each incubation period (P > 0.05). MTA and CEM presented more than 90% cell viability after 24 and 48 hours of incubation and showed statistically significant decrease in cell viability after 72 hours of incubation (P < 0.05). Biodentine showed significantly less cell viability (73%) after 24 hours of incubation, whereas more than 90% cell viability was seen after 48 and 72 hours of incubation (P < 0.05). Despite the significant changes in cell viability over time, materials presented similar cytotoxicity profile. Biodentine and CEM can be considered as alternative materials for root-end surgery procedures.

Efficacy of Combined Use of Different Nickel-Titanium Files on Removing Root Canal Filling Materials.

INTRODUCTION: The aim of this study was to estimate the remaining amount of residual filling materials in root canals after retreatment using ProTaper Universal Retreatment (PTUR) files (Dentsply Maillefer, Ballaigues, Switzerland) alone or with the additional use of the Self-Adjusting File (SAF; ReDent-Nova, Ra'anana, Israel), Reciproc (VDW, Munich, Germany), or Hedström-files (H-file; VDW, Antaeos, Munich, Germany) with volumetric estimation using the stereologic method via cone-beam computed tomographic images. METHODS: Forty-eight mandibular premolars with single canals were used. The canals were instrumented with ProTaper rotary instruments up to F4 and filled with gutta-percha and AH26 sealer (Dentsply De Trey, Johnson City, TN). All the samples were placed into the silicone models. Samples were scanned with cone-beam computed tomographic imaging and assigned into 4 groups (n = 12) according to retreatment files: the PTUR system group, the PTUR system plus SAF group, the PTUR system plus Reciproc group, and the PTUR system plus H-file group. The specimens were rescanned after retreatment procedures, and the volume estimations of the remaining filling materials were performed using the stereologic method. Data were analyzed using Kruskal-Wallis and Dunn tests. RESULTS: There was no significant difference among the groups regarding mean percentage volumes of the filling materials before retreatment procedures (P > .05). None of the retreatment procedures provided complete removal of the filling materials. The additional use of the SAF did not significantly improve the removal of filling materials when compared with the PTUR system alone (P > .05). However, the additional use of Reciproc or hand H-files significantly improved the removal of filling materials when compared with the PTUR system alone (P < .05). CONCLUSIONS: The additional use of files with different motion kinetics improved the removal of root canal fillings; however, none of the systems completely removed the root canal filling material from the root canals.

Evaluation of the effects of two novel irrigants on intraradicular dentine erosion, debris and smear layer removal.

OBJECTIVES: To evaluate the effects of copolymer of acrylic acid and maleic acid (Poly[AA-co-MA]) and calcium hypochlorite (Ca(OCl)2) on root canal dentin using scanning electron microscope (SEM). MATERIALS AND METHODS: Twenty-four single-rooted teeth were instrumented and the apical and coronal thirds of each root were removed, leaving the 5 mm middle thirds, which were then separated into two pieces longitudinally. The specimens were randomly divided into six groups and subjected to each irrigant for 5 min as follows: G1, Ca(OCl)2; G2, Poly(AA-co-MA); G3, Ca(OCl)2 + Poly(AA-co-MA); G4, sodium hypochlorite (NaOCl); G5, ethylenediaminetetraacetic acid (EDTA); G6, NaOCl+EDTA. The specimens were prepared for SEM evaluation. Smear layer, debris and erosion scores were recorded by two blinded examiners. One image from G3 was analyzed with energy dispersive spectroscopy (EDS) on suspicion of precipitate formation. Data were analyzed using the Kruskal-Wallis and Dunn tests. RESULTS: G1 and G4 showed the presence of debris and smear layer and they were statistically different from G2, G3, G5 and G6 where debris and smear layer were totally removed (p < 0.05). In G1 and G4, erosion evaluation could not be done because of debris and smear layer. G2, G3 and G5 showed no erosion, and there was no significant difference between them. G6 showed severe erosion and was statistically different from G2, G3 and G5 (p < 0.05). EDS microanalysis showed the presence of Na, P, and Ca elements on the surface. CONCLUSIONS: Poly(AA-co-MA) is effective in removing the smear layer and debris without causing erosion either alone or with Ca(OCl)2.

Evaluation of Root Canal Preparation Using Rotary System and Hand Instruments Assessed by Micro-Computed Tomography.

BACKGROUND: Complete mechanical preparation of the root canal system is rarely achieved. Therefore, the purpose of this study was to evaluate and compare the root canal shaping efficacy of ProTaper rotary files and standard stainless steel K-files using micro-computed tomography. MATERIAL AND METHODS: Sixty extracted upper second premolars were selected and divided into 2 groups of 30 teeth each. Before preparation, all samples were scanned by micro-computed tomography. Thirty teeth were prepared with the ProTaper system and the other 30 with stainless steel files. After preparation, the untouched surface and root canal straightening were evaluated with micro-computed tomography. The percentage of untouched root canal surface was calculated in the coronal, middle, and apical parts of the canal. We also calculated straightening of the canal after root canal preparation. Results from the 2 groups were statistically compared using the Minitab statistical package. RESULTS: ProTaper rotary files left less untouched root canal surface compared with manual preparation in coronal, middle, and apical sector (p<0.001). Similarly, there was a statistically significant difference in root canal straightening after preparation between the techniques (p<0.001). CONCLUSIONS: Neither manual nor rotary techniques completely prepared the root canal, and both techniques caused slight straightening of the root canal.

Cytotoxic effect of endodontic irrigants in vitro.

BACKGROUND: Cytotoxicity of root canal irrigants is important due to their close contact with host tissues. The aim of this study was to assess the cytotoxic effect of NaOCl 3%, Chx 2%, and MTAD on rat periodontal ligament fibroblasts, at 0.1 and 100 µl/mL, using WST-1 colorimetric method. MATERIAL AND METHODS: Rat ligamental fibroblasts were exposed to the irrigants and their viability was assessed after 1, 24, 48, and 72 h. The measurements were determined using WST-1 assay, using a micro ELISA reader. RESULTS: At 100 ml/L all 3 irrigants were strongly cytotoxic, although CHX was less so than NaOCl and MTAD. At the 0.1 ml/L concentration, NaOCl and MTAD were only moderately cytotoxic, whereas Chx was highly deleterious to cell viability at all time points. There was a significant influence of the dilution rate of the substance, because the odds ratio for cell viability being over 50% was increased 51 times between the 100 ml/L and 0.1 ml/L dilutions. CONCLUSIONS: It seems that irrigating solutions should be used at lower concentrations to enhance cell viability.

Effects of preparation techniques on root canal shaping assessed by micro-computed tomography.

BACKGROUND: Root canal shaping without any procedural error is of the utmost preference. Therefore, the purpose of this study was to use micro-computed tomography to evaluate and compare the root canal shaping efficacy of ProTaper rotary files and standard stainless steel K-files. MATERIAL AND METHODS: Sixty extracted upper second premolars were selected and were divided into 2 groups of 30. Before preparation, all samples were scanned by micro-CT. Then, 30 teeth were prepared with stainless steel files and the remaining 30 with ProTaper rotary files. Canal transportation and centering ability before and after root canal shaping were assessed using micro-CT. The amount and direction of canal transportation and the centering ratio of each instrument were determined in the coronal, middle, and apical parts of the canal. The 2 groups were statistically compared using one-way ANOVA. RESULTS: ProTaper rotary files gave less transportation (p<0.001) and better centering ability (p<0.00001) compared with stainless steel files. CONCLUSIONS: The manual technique for preparation of root canals with stainless steel files produces more canal transportation, whereas rotary files remain more centered in the canal.