Effect of treatment variables on apical extrusion of debris during root canal retreatment: A systematic review and meta-analysis of laboratory studies.

Background: This study aimed to systematically and comprehensively review the effect of various treatment variables on apically extruded debris (AED) during non-surgical root canal retreatment (NSRCRT). Methods: The study protocol is shared in the Open Science Framework database (https://osf.io/kjtdg/?view_only=17060180705745ec9dae9a01614f3880). An electronic search was conducted up to July 2022 to reveal related studies. Two reviewers critically assessed the studies for eligibility against inclusion and exclusion criteria and data extraction. Quantitative data synthesis was performed, and the risk of bias in the studies was also evaluated. Results: Forty-six studies were included in the systematic review and 14 in the meta-analysis. Conflicting or limited evidence was found for the effect of sealer type, obturation technique, and solvent use. The manual instrumentation increased the amount of AED compared to rotary instrumentation during the removal of filling materials (P<0.001). There was no significant difference in the amount of AED between the use of rotary and reciprocating files during the removal of filling materials (P=0.181). Conclusion: Rotary instruments can be recommended instead of manual instruments during the removal of filling materials to control the amount of AED. Further studies with a low risk of bias are needed to clarify the effect of other treatment variables on AED during NSRCRT.

Effects of different treatment modalities on biomechanical behavior of maxillary incisors with external invasive cervical resorption at different progression levels.

BACKGROUND/AIM: This study aimed to evaluate the biomechanical behavior of maxillary incisors with external invasive cervical resorption (EICR) at different progression levels after receiving different modes of treatment under occlusal forces using finite element analysis (FEA). MATERIALS AND METHODS: Three-dimensional (3D) models of intact maxillary central incisors were constructed and modified to include EICR cavities with different progression levels in the buccal cervical areas. The EICR cavities confined to dentin were repaired using Biodentine™ (Septodont Ltd., Saint Maur des Fausse ́s, France), resin composite, or glass ionomer cement (GIC) . Additionally, EICR cavities with pulp invasion requiring direct pulp capping were simulated as repaired using Biodentine only or 1 mm thick Biodentine and either resin composite or GIC for the rest of the cavity. Moreover, models with root canal treatment and EICR defects repaired using Biodentine, resin composites, or GIC were also generated. A force of 240 N was applied to the incisal edge. The principal stresses in the dentin were evaluated. RESULTS: GIC showed more favorable results than the other materials in EICR cavities confined to the dentin. However, Biodentine alone resulted in more favorable minimum principal stresses (Pmin ) compared to other materials in EICR cavities with close pulp proximity. Exceptionally, the models localized in the coronal third of the root with a circumferential extension of the cavity >90° showed more favorable results for GIC. The presence of root canal treatment had no significant effect on stress values. CONCLUSIONS: Based on this FEA study the use of GIC in EICR lesions confined to the dentin is recommended. However, Biodentine may be a better option for restoring EICR lesions close to the pulp with or without root canal treatment. Except when the circumferential extension of the cavity is >90°, the use of GIC may be more advantageous.

Effect of different sealer activation techniques on dentinal tubule penetration.

The aim of this study was to evaluate the influence of different activation techniques on dentin tubule penetration of root canal sealer. Seventy-five teeth with single canals were chemomechanically prepared. A calcium silicate-based sealer was stained with a fluorescent dye (rhodamine B), placed into the canals and activated according to the following groups: control (no activation), EDDY, EndoActivator, ultrasonic and XP-Endo Finisher. Then, the samples were obturated. The percentages of sealer penetration at various depth levels of root sections were measured with confocal laser scanning microscopy. XP-Endo Finisher presented the highest penetration at 50 µm (p < 0.05). XP-Endo Finisher showed similar penetration with EDDY at 100 and 200 µm (p > 0.05) while presented higher penetration than the other groups (p < 0.05). At 500 µm, XP-Endo Finisher presented higher penetration than EndoActivator (p < 0.05) while similar penetration with the other groups (p > 0.05). XP-Endo Finisher can be recommended for activation during sealer placement for better penetration into dentin tubules.

Combined effects of bone morphogenetic protein-7 and mineral trioxide aggregate on the proliferation, migration, and differentiation of human dental pulp stem cells.

BACKGROUND: Bioactive molecules present the potential to be used along with biomaterials in vital pulp therapy and regenerative endodontic treatment. OBJECTIVE: The aim of this study was to assess the effects of the combined use of bone morphogenetic protein-7 (BMP-7) and mineral trioxide aggregate (MTA) on the proliferation, migration, and differentiation of human dental pulp stem cells (DPSCs). METHODOLOGY: For the proliferation analysis, DPSCs were incubated with a growth medium and treated with MTA and/or BMP-7 at different concentrations. For the following analyses, DPSCs were incubated with a differentiation medium and treated with MTA and/or BMP-7. Moreover, there were groups in which DPSCs were incubated with the growth medium (control), the differentiation medium, or DMEM/F12 containing fetal bovine serum, and not treated with MTA or BMP-7. Cell proliferation was analyzed using the WST-1 assay. The odontogenic/osteogenic differentiation was evaluated by immunocytochemistry, alkaline phosphatase (ALP) activity assay, alizarin red staining, and reverse transcription-quantitative polymerase chain reaction (RT-qPCR). Cell migration was evaluated using a wound-healing assay. Data were analyzed using analysis of variance and Tukey test (p=0.05). RESULTS: The use of BMP-7 with MTA presented no significant effect on cell proliferation in comparison with the treatment with MTA alone (p>0.05), but showed higher ALP activity, increased mineralization, and higher expression of DMP1 and DSPP when compared with other groups (p<0.05). Nestin expression was higher in the control group than in groups treated with MTA and/or BMP-7 (p<0.05). The cell migration rate increased after treatment with MTA when compared with other groups in all periods of time (p<0.05). At 72 hours, the wound area was smaller in groups treated with MTA and/or BMP-7 than in the control group (p<0.05). CONCLUSION: The use of BMP-7 with MTA increased odontogenic/osteogenic differentiation without adversely affecting proliferation and migration of DPSCs. The use of BMP-7 with MTA may improve treatment outcomes by increasing repair and regeneration capacity of DPSCs.

Do resin-based root canal sealers cause more postoperative pain than other sealers? A systematic review of clinical studies and meta-analysis.

OBJECTIVE: To evaluate whether root canal obturation with resin-based sealers increases the incidence and intensity of postoperative pain compared to other sealer types. DATA SOURCES: Medline, Scopus, Web of Science, Google Scholar, Cochrane Library, and gray literature were searched through December 2020. Clinical studies evaluating postoperative pain after obturation with resin-based sealers and other sealer types were included. Risk of bias was assessed through the Cochrane RoB 2.0 tool for randomized clinical trials (RCTs) and ROBINS-I tool for non-randomized clinical trials (nRCTs). Pooled relative risks (RR), standardized mean differences (SMD), and 95% confidence intervals were calculated for quantitative analyses. Of 524 studies, 11 clinical studies (eight RCTs and three nRCTs) involving 1,123 teeth were included. Four studies were assigned low risk of overall bias while seven studies presented high risk of overall bias. Quantitative analyses were performed with six studies for pain incidence, five studies for pain intensity, and four studies for analgesic intake. There was no significant difference between resin- based sealers and other sealer types in postoperative pain incidence at 24 hours (RR 1.102, P = .53), 48 hours (RR 0.943, P = .93), 72 hours (RR 1.019, P = .93), and 1 week (RR 0.559, P = .31), in pain intensity at 12 hours (SMD 0.100, P = .35), 24 hours (SMD 0.090, P = .25), and 48 hours (SMD 0.217, P = .26), and in analgesic intake at 24 hours (RR 2.253, P = .15) and 72 hours (RR 0.650, P = .59). CONCLUSION: Based on the available evidence, resin-based sealers do not increase the postoperative pain incidence, intensity, and analgesic intake compared to other sealer types.

Combined effects of bone morphogenetic protein-7 and mineral trioxide aggregate on the proliferation, migration, and differentiation of human dental pulp stem cells

Abstract Bioactive molecules present the potential to be used along with biomaterials in vital pulp therapy and regenerative endodontic treatment. Objective The aim of this study was to assess the effects of the combined use of bone morphogenetic protein-7 (BMP-7) and mineral trioxide aggregate (MTA) on the proliferation, migration, and differentiation of human dental pulp stem cells (DPSCs). Methodology For the proliferation analysis, DPSCs were incubated with a growth medium and treated with MTA and/or BMP-7 at different concentrations. For the following analyses, DPSCs were incubated with a differentiation medium and treated with MTA and/or BMP-7. Moreover, there were groups in which DPSCs were incubated with the growth medium (control), the differentiation medium, or DMEM/F12 containing fetal bovine serum, and not treated with MTA or BMP-7. Cell proliferation was analyzed using the WST-1 assay. The odontogenic/osteogenic differentiation was evaluated by immunocytochemistry, alkaline phosphatase (ALP) activity assay, alizarin red staining, and reverse transcription-quantitative polymerase chain reaction (RT-qPCR). Cell migration was evaluated using a wound-healing assay. Data were analyzed using analysis of variance and Tukey test (p=0.05). Results The use of BMP-7 with MTA presented no significant effect on cell proliferation in comparison with the treatment with MTA alone (p>0.05), but showed higher ALP activity, increased mineralization, and higher expression of DMP1 and DSPP when compared with other groups (p<0.05). Nestin expression was higher in the control group than in groups treated with MTA and/or BMP-7 (p<0.05). The cell migration rate increased after treatment with MTA when compared with other groups in all periods of time (p<0.05). At 72 hours, the wound area was smaller in groups treated with MTA and/or BMP-7 than in the control group (p<0.05). Conclusion The use of BMP-7 with MTA increased odontogenic/osteogenic differentiation without adversely affecting proliferation and migration of DPSCs. The use of BMP-7 with MTA may improve treatment outcomes by increasing repair and regeneration capacity of DPSCs.

Influence of reciprocating and rotary instrumentation on microbial reduction: a systematic review and meta-analysis of in vitro studies.

OBJECTIVES: The purpose of this study was to conduct a systematic review and meta-analysis of in vitro studies regarding the effectiveness of reciprocating and rotary instrumentation on microbial reduction in root canals. MATERIALS AND METHODS: PubMed, Scopus, Web of Science, the Cochrane Library, and the gray literature were searched through December 2019. Studies comparing the influence of reciprocating and rotary instrumentation on the removal of microorganisms from root canals that quantified the antimicrobial effect were included. Data extraction was completed using a systematic form for data collection. The risk of bias of the studies was evaluated. Standardized mean differences (SMDs) and confidence intervals (CIs) were calculated using a random effects meta-analysis. RESULTS: Seventeen in vitro studies were included in this systematic review, of which 7 provided adequate data for inclusion in the meta-analysis. Both reciprocating and rotary systems were similarly effective in reducing the microbial load in infected root canals (SMD [95% CI], 0.0481 [-0.271, 0.367]). Three studies showed a low risk of bias, whereas most of the studies (82%) presented a medium risk. CONCLUSIONS: Although both techniques decrease the microbial content (with reductions of 23.32%-88.47% and 23.33%-89.86% for reciprocating and rotary instrumentation, respectively), they are not able to provide complete disinfection of root canals.

Contribution of XP-Endo files to the root canal filling removal: A systematic review and meta-analysis of in vitro studies.

This review was designed to analyse whether the supplementary use of XP-Endo Finisher and XP-Endo Finisher R contributes to the removal of root canal filling materials. Databases were searched up to November 2020. Studies were critically assessed according to inclusion and exclusion criteria. Risk of bias evaluation was performed. Pooled standardised mean differences (SMD) and 95% confidence intervals (95% CI) were calculated. Ten studies involving 192 teeth were eligible for systematic review and meta-analysis could be performed with eight of these studies. Strong evidence showed that XP-Endo Finisher R file contributed significantly to filling material removal from root canals (SMD (95% CI): 0.41 (0.06-0.76)). Although the evidence was conflicting, XP-Endo Finisher R file was superior than other irrigant activation techniques (SMD (95% CI): 0.47 (0.02-0.93)). The supplementary use of XP-Endo Finisher and XP-Endo Finisher R is beneficial in further removal of root canal filling materials from root canal system.

Effect of benzalkonium chloride addition to EDTA on attachment and proliferation of dental pulp stem cells on dentin and on transforming growth factor-ß1 release.

To investigate the effect of benzalkonium chloride (BAC) addition to ethylenediaminetetraacetic acid (EDTA) on transforming growth factor-ß1 (TGF-ß1) release, as well as attachment and proliferation of dental pulp stem cells (DPSCs) on dentin. A total of standard 268 human dentin disks were prepared and immersed in 1.5% sodium hypochlorite (NaOCl) for 5 min. The disks were rinsed with distilled water and randomly divided into seven groups. In control group, the disks received no further treatment. The remaining disks were immersed in following solutions: 17% EDTA or 17% EDTA + 0.008% BAC for 1, 5 or 10 min and rinsed with distilled water. DPSCs were seeded in part of the disks since the TGF-ß1 release assay was performed with disks with and without cells. The attachment and proliferation of DPSCs on dentin disks were analyzed using lactate dehydrogenase activity and WST-1 assays, respectively. The cell morphology was observed by scanning electron microscopy. The release of TGF-ß1 was quantified using ELISA. Data were analyzed using three- and two-way analysis of variance with Bonferroni corrections. Both EDTA solutions increased the attachment and proliferation of DPSCs (p < .05) while there was no significant difference between them (p > .05). The exposure time of both EDTA solutions had no influence on cell attachment, proliferation and TGF-ß1 release (p > .05). There was no significant difference in TGF-ß1 release between the control and experimental groups (p > .05). The amount of released TGF-ß1 from dentin disks was similar whether or not they were seeded with cells (p > .05). Dentin treatment with either of the EDTA solutions had no effect on the amount of TGF-ß1 release while both EDTA solutions improved cell attachment and proliferation on dentin surface regardless of exposure time.

Critical evaluation of fracture strength testing for endodontically treated teeth: a finite element analysis study.

OBJECTIVES: The aim of this study was to investigate whether the diameter and direction of the plunger and simulation of the periodontal ligament (PDL) affected the stress distribution in endodontically treated premolars. METHODS: A fracture strength test was simulated via finite element analysis. A base model was set up, and the following parameters were modified: plunger diameter (3 mm vs. 6 mm), plunger direction (vertical vs. 135° angular to the central fossa), and PDL simulation. The analysis was conducted using the CosmosWorks structural analysis program, and the results are presented in terms of von Mises stresses. RESULTS: The smaller plunger increased the stresses at the contact area of the crown, but the plunger diameter had no effect on the stress distribution within the root. An angular plunger direction increased stresses within the root, as well as at the buccal cusp of the crown, compared with the vertical direction. Simulation of the PDL caused higher stress accumulation, especially in the cervical region of the root. CONCLUSIONS: The plunger diameter had no effect on the stress distribution in the roots, whereas the plunger direction and PDL simulation did affect the stress distribution. More stringent standards can be established by taking such parameters into account when performing fracture testing in future studies.

Adaptation of mineral trioxide aggregate to dentine walls compared with other root-end filling materials: A systematic review.

This systematic review analysed the literature comparing marginal adaptation of mineral trioxide aggregate (MTA) with other filling materials in root-end cavities. The PubMed, Ovid, Web of Science, SCOPUS, and Cochrane library databases were searched using appropriate keywords related to root-end filling materials and adaptation. Of 38 articles assessed, 20 met the inclusion criteria. No in vivo study was identified. In 10 studies, MTA gave the best marginal adaptation results, but no significant differences were found between MTA and any of the tested filling materials in seven studies. There was great variability in the study designs including analysed surface, unit of gap measurement and magnification amount during analysis. On the basis of available evidence, MTA presented good marginal adaptation to dentine walls. This review identified the need for the development of standardised methods to evaluate the adaptation property of root-end filling materials in ex vivo studies as well as in clinical studies evaluating outcome.

Obturation quality of calcium silicate-based cements placed with different techniques in teeth with perforating internal root resorption: a micro-computed tomographic study.

OBJECTIVES: To evaluate and compare the obturation quality of mineral trioxide aggregate (MTA) and Biodentine placed with hand condensation or indirect ultrasonic activation technique in teeth models simulating perforating internal root resorption (IRR) using micro-computed tomographic (micro-CT) imaging. MATERIALS AND METHODS: Standardized models with perforating IRR cavities were created using 40 extracted single-rooted human teeth and randomly divided into four groups (n = 10). The specimens were obturated with either MTA or Biodentine and the placement technique applied was either hand condensation or indirect ultrasonic activation. Micro-CT scans were performed for the volumetric analysis of voids and filling materials in the resorption cavities and apical portion of the specimens. Data were analyzed using one-way analysis of variance and paired t test. RESULTS: No significant difference was observed between the groups in terms of the percentage volume of filling materials (p > 0.05). The apical portion of the specimens significantly presented less percentage volume of filling materials than the resorption cavities in each group (p < 0.05). CONCLUSIONS: No placement technique produced void-free fillings in teeth with perforating IRR. There was no significant difference between the obturation quality of Biodentine and MTA. The obturation quality in the apical portion of the root canals was inferior than that in the resorption cavities. CLINICAL RELEVANCE: The obturation of the apical region of teeth with perforating IRR is challenging irrespective of the material type and placement technique.

Effect of phytic acid on the setting times and tensile strengths of calcium silicate-based cements.

This study aimed to evaluate and compare the effect of 1% phytic acid as a mixing medium on the setting times and diametral tensile strengths of different calcium silicate-based cements. Specimens for four experimental groups (n = 20/each) were fabricated by mixing ProRoot MTA® (Dentsply) and Biodentine® (Septodont) powders with their original liquids or with 1% phytic acid. Half of the samples in each group were immediately subjected to setting time tests, whereas the remaining half was subjected to the diametral tensile strength test after 3 weeks. When mixed with their original liquids, the setting time of MTA was significantly longer than that of Biodentine® (P < 0.05). When mixed with phytic acid, the initial and final setting times of both test materials significantly decreased (P < 0.05). The diametral tensile strength of Biodentine® was significantly greater than that of MTA (P < 0.05). However, phytic acid had no effect on this outcome (P > 0.05).

Surface and vertical dimensional changes of mineral trioxide aggregate and biodentine in different environmental conditions

Abstract Surface changes in biological environments are critical for the evaluation of physical and biological activity of biomaterials. Objective: This study investigated surface alterations of calcium silicate-based cements after exposure to different environments. Material and Methods: Forty-eight cylindrical cavities were prepared on root surfaces. The cavities were filled using ProRoot MTA or Biodentine and assigned to four subgroups (n=6): dry, wet, acidic, and blood. Surface topographies were evaluated using an optical profilometer for 28 days, and the roughness of the material surfaces was quantified. Vertical dimensional change was measured by determining the height difference between the material surface and the flat tooth surface. Data were compared with a two-way repeated measures ANOVA and Bonferroni tests. Results: In dry condition, the surface roughness of MTA or Biodentine was constant up to 3 days (p>0.05) but decreased after 28 days (p<0.05). In dry condition, ProRoot MTA presented constant surface level through time, while Biodentine showed decreased surface level after 28 days. In wet condition, the roughness and the surface levels of both materials increased after 1 day (p<0.05). Neither the surface roughness nor the levels of the materials showed significant changes in acidic conditions (p>0.05). Both materials showed the highest roughness in blood conditions on the 1st day (p<0.05), while the surface roughness in blood decreased dramatically after 28 days. The roughness of Biodentine was higher in wet conditions up to 3 days compared with ProRoot MTA (p<0.05). Likewise, in blood condition, Biodentine showed higher roughness on the 28th day than ProRoot MTA (p<0.05). Conclusions: Dry, wet, and blood conditions had a time-dependent effect on the surface roughness and vertical dimensional changes of the materials. However, acidic conditions did not affect the roughness and the surface level of the materials.

Surface and vertical dimensional changes of mineral trioxide aggregate and biodentine in different environmental conditions.

OBJECTIVES: Surface changes in biological environments are critical for the evaluation of physical and biological activity of biomaterials. Objective: This study investigated surface alterations of calcium silicate-based cements after exposure to different environments. MATERIAL AND METHODS: Material and Methods: Forty-eight cylindrical cavities were prepared on root surfaces. The cavities were filled using ProRoot MTA or Biodentine and assigned to four subgroups (n=6): dry, wet, acidic, and blood. Surface topographies were evaluated using an optical profilometer for 28 days, and the roughness of the material surfaces was quantified. Vertical dimensional change was measured by determining the height difference between the material surface and the flat tooth surface. Data were compared with a two-way repeated measures ANOVA and Bonferroni tests. RESULTS: Results: In dry condition, the surface roughness of MTA or Biodentine was constant up to 3 days (p>0.05) but decreased after 28 days (p<0.05). In dry condition, ProRoot MTA presented constant surface level through time, while Biodentine showed decreased surface level after 28 days. In wet condition, the roughness and the surface levels of both materials increased after 1 day (p<0.05). Neither the surface roughness nor the levels of the materials showed significant changes in acidic conditions (p>0.05). Both materials showed the highest roughness in blood conditions on the 1st day (p<0.05), while the surface roughness in blood decreased dramatically after 28 days. The roughness of Biodentine was higher in wet conditions up to 3 days compared with ProRoot MTA (p<0.05). Likewise, in blood condition, Biodentine showed higher roughness on the 28th day than ProRoot MTA (p<0.05). CONCLUSIONS: Conclusions: Dry, wet, and blood conditions had a time-dependent effect on the surface roughness and vertical dimensional changes of the materials. However, acidic conditions did not affect the roughness and the surface level of the materials.

Effect of root canal sealers on the fracture resistance of endodontically treated teeth: a systematic review of in vitro studies.

OBJECTIVE: The purpose of this study was to systematically review and critically analyze the published data of in vitro studies testing the effect of root canal sealers on the fracture resistance of endodontically treated teeth. METHODS: A comprehensive literature search was performed by using the Medline, Scopus, Web of Science, Cochrane, and Open Grey databases. A hand search of the reference lists of identified articles was also performed. Two reviewers critically assessed the studies for eligibility against inclusion and exclusion criteria and performed data extraction. Evaluation of the risk of bias of the studies was performed. RESULTS: A total of 48 studies were assessed for eligibility. Of these, 20 met the inclusion criteria and were included in the systematic review. All studies had a medium or high risk of bias. Although the majority of the studies reported that the use of root canal sealers increased the fracture resistance of endodontically treated teeth, conflicting evidence was found for the reinforcing effect of resin, glass ionomer, and calcium silicate-based sealers while there was moderate evidence for zinc oxide eugenol-based sealers in favor of no reinforcing effect. CONCLUSION: On the basis of available evidence, the use of root canal sealer increases the fracture resistance of endodontically treated teeth. However, included studies presented considerable risk of bias. Regarding the comparisons among the sealers, no conclusions could be drawn for the superiority of one sealer type to another. CLINICAL RELEVANCE: A considerable heterogeneity was found in the methodologies of included studies. Therefore, this review strongly suggests the development of standardized methods to test the reinforcement effect of root canal filling materials in in vitro studies.

Mineral content analysis of root canal dentin using laser-induced breakdown spectroscopy.

OBJECTIVES: This study aimed to introduce the use of laser-induced breakdown spectroscopy (LIBS) for evaluation of the mineral content of root canal dentin, and to assess whether a correlation exists between LIBS and scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS) methods by comparing the effects of irrigation solutions on the mineral content change of root canal dentin. MATERIALS AND METHODS: Forty teeth with a single root canal were decoronated and longitudinally sectioned to expose the canals. The root halves were divided into 4 groups (n = 10) according to the solution applied: group NaOCl, 5.25% sodium hypochlorite (NaOCl) for 1 hour; group EDTA, 17% ethylenediaminetetraacetic acid (EDTA) for 2 minutes; group NaOCl+EDTA, 5.25% NaOCl for 1 hour and 17% EDTA for 2 minutes; a control group. Each root half belonging to the same root was evaluated for mineral content with either LIBS or SEM/EDS methods. The data were analyzed statistically. RESULTS: In groups NaOCl and NaOCl+EDTA, the calcium (Ca)/phosphorus (P) ratio decreased while the sodium (Na) level increased compared with the other groups (p < 0.05). The magnesium (Mg) level changes were not significant among the groups. A significant positive correlation was found between the results of LIBS and SEM/EDS analyses (r = 0.84, p < 0.001). CONCLUSIONS: Treatment with NaOCl for 1 hour altered the mineral content of dentin, while EDTA application for 2 minutes had no effect on the elemental composition. The LIBS method proved to be reliable while providing data for the elemental composition of root canal dentin.

Interaction of backfilling techniques and MTA plugs with additives: Fracture strength and adaptation analyses.

The aims were to evaluate the effects of different additives on the adaptation of mineral trioxide aggregate (MTA) plugs before and after different backfilling techniques and analyze the interference of filling procedures on the fracture resistance of simulated immature teeth. The apical parts of 60 teeth were filled with MTA mixed with distilled water (DW), propylene glycol (PG) or calcium chloride (CaCl2) and backfilled with cold lateral condensation (CLC) or warm vertical compaction (WVC). The specimens were subjected to adaptation analysis and fracture testing. CaCl2 addition resulted in poor marginal adaptation, while PG addition significantly decreased the fracture values (p<0.05). WVC technique negatively affected the marginal adaptation of MTA-CaCl2 plugs and decreased the fracture values of teeth with MTA-PG plugs (p<0.05). Mixing MTA with DW can be recommended as apical plug when the remaining root canal space is going to be filled with either CLC or WVC techniques.

Efficacy of different irrigant protocols and application systems on sealer penetration using a stepwise CLSM analysis.

This study compared several irrigation protocols and application systems for sealer penetration into dentinal tubules. Single-rooted-human teeth were divided into 5 experimental groups (n = 15) and a control group (n = 5), according to final irrigation protocols: standard needle irrigation (SNI); Vibringe; Vibringe + NaviTip FX (Vibringe NFX); Endo Spray (ES); and passive-ultrasonic-irrigation (PUI). Following obturation of the root canals, the percentage of the sealer penetration was measured at different depths using stepwise CLSM analysis. The sealer penetration in the experimental groups was significantly higher than the control group at all levels (p < .05). No significant differences were observed between Vibringe and SNI or Vibringe NFX, ES, and PUI at all depths (p > .05). The Vibringe NFX, ES, and PUI groups allowed deeper sealer penetration than SNI at 100, 250, and 500 µm levels (p < .05). The irrigant activation, the needle design, and the application form (syringe or spray) may impact the quality of the seal that is achieved with root canal filling.

Effect of Post Space Preparation on Apical Obturation Quality of Teeth Obturated with Different Techniques: A Micro-computed Tomographic Study.

INTRODUCTION: The purpose of this study was to evaluate the obturation quality of root canals filled with different techniques and to determine whether post space preparation had an effect on the quality of apical obturation using micro-computed tomographic (micro-CT) imaging. METHODS: The root canals of 30 human mandibular premolar teeth were instrumented, and the specimens were divided into 3 groups according to the obturation technique used: cold lateral compaction (CLC), warm vertical compaction (WVC), or single-cone (SC) techniques. The specimens were stored at 37°C and 100% humidity for 1 week. Then, the coronal root filling material was removed in order to create a post space. Micro-CT scans were performed before and after post space preparation for the volumetric analysis of voids and filling materials. Data were analyzed using repeated-measures analysis of variance and Bonferroni tests. RESULTS: The CLC and SC groups showed a significantly greater percentage volume of voids than the WVC group (P < .05), whereas no significant difference was found between the CLC and SC groups before and after post space preparation (P > .05). The post space preparation caused a significant increase in the percentage volume of voids in the CLC and SC groups (P < .05). No significant difference was detected in the percentage volume of voids in the WVC group after post space preparation (P > .05). CONCLUSIONS: No root fillings were void free. The WVC group presented the best obturation quality. The post space preparation negatively influenced the apical integrity of the filling materials in the CLC and SC groups, whereas it had no significant effect in the WVC group.