Comparison of Dynamic Knee Contact Mechanics with T2 Imaging in Different Ages of Healthy Participants.

Aging is a known risk factor for Osteoarthritis (OA), however, relations between cartilage composition and aging remain largely unknown in understanding human OA. T2 imaging provides an approach to assess cartilage composition. Whether these T2 relaxation times in the joint contact region change with time during gait remain unexplored. The study purpose was to demonstrate a methodology for linking dynamic joint contact mechanics to cartilage composition as measured by T2 relaxometry. T2 relaxation times for unloaded cartilage were measured in a 3T General Electric magnetic resonance (MR) scanner in this preliminary study. High-speed biplanar video-radiography (HSBV) was captured for five 20-30-year-old and five 50-60-year-old participants with asymptomatic knees. By mapping the T2 cartilages to the dynamic contact regions, T2 values were averaged over the contact area at each measurement within the gait cycle. T2 values demonstrated a functional relationship across the gait cycle. There were no statistically significant differences between 20- and 30-year-old and 50-60-year-old participant T2 values at first force peak of the gait cycle in the medial femur (p = 1.00, U = 12) or in the medial tibia (p = 0.31, U = 7). In the medial and lateral femur in swing phase, the joint moved from a region of high T2 values at 75% of gait to a minimum at 85-95% of swing. The lateral femur and tibia demonstrated similar patterns to the medial compartments but were less pronounced. This research advances understanding of the linkage between cartilage contact and cartilage composition. The change from a high T2 value at ~ 75% of gait to a lower value near the initiation of terminal swing (90% gait) indicates that there are changes to T2 averages corresponding to changes in the contact region across the gait cycle. No differences were found between age groups for healthy participants. These preliminary findings provide interesting insights into the cartilage composition corresponding to dynamic cyclic motion and inform mechanisms of osteoarthritis.

Design of a double acting pneumatic cartilage loading device for magnetic resonance imaging.

Studies of osteoarthritis initiation and progression that measure strain in cartilage require physiological loading levels. Many studies use magnetic resonance (MR) imaging, which necessitates a MR-compatible loading device. In this study, the design and validation of a new device, the cartilage compressive actuator (CCA), is presented. The CCA is designed for high-field (e.g., 9.4 T) small-bore MR scanners, and meets a number of design criteria. These criteria include capability for testing bone-cartilage samples, MR compatibility, constant load and incremental strain application, a water-tight specimen chamber, remote control, and real time displacement feedback. The mechanical components in the final design include an actuating piston, a connecting chamber, and a sealed specimen chamber. An electro-pneumatic system applies compression, and an optical Fibre-Bragg grating (FBG) sensor provides live displacement feedback. A logarithmic relationship was observed between force exerted by the CCA and pressure (R2 = 0.99), with a peak output force of 653 ± 2 N. The relationship between FBG sensor wavelength and displacement was linear when calibrated both outside (R2 = 0.99) and inside (R2 = 0.98) the MR scanner. Average slope was similar between the two validation tests, with a slope of -4.2 nm/mm observed inside the MR scanner and -4.3 to -4.5 nm/mm observed outside the MR scanner. This device meets all design criteria and represents an improvement over published designs. Future work should incorporate a closed feedback loop to allow for cyclical loading of specimens.

The influence of smoothing techniques on the accuracy of the reference finite helical axis when applied to 2D-3D registrations.

Highspeed Biplanar Videoradiography (HSBV) permits recording of 3D bone movements with sub-millimeter precision. 2D-3D registrations are performed to quantify bone movements, providing a series of affine transformation matrices (ATMs). These registrations may result in alignment errors that produce inaccurate kinematics. Smoothing techniques can be applied to the ATMs to reduce these inaccuracies. Which techniques are best for this application remain unknown. The purpose of this study was to investigate the performance of six smoothing techniques on ATMs obtained from HSBV. Performance was assessed by measuring the accuracy of three reference finite helical axis (rFHA) measures during a turntable rotation: orientation, dispersion, and rotation speed difference (RSD = rFHA RS-turntable RS). A 3D printed femur and tibia were mounted to the turntable and rotations recorded with HSBV. The rFHA was calculated for the bones using each smoothing technique and ranked using a Friedman test. The relative percent change to the unsmoothed data was reported. A spline filter with outlier removal (SPOUT) was ranked the best technique, producing the most accurate RSDs for the femur (-79.64%) and tibia (-70.59%). SPOUT was the top performing smoothing technique. Further investigations using SPOUT are required for in-vivo human movements.

Empirical joint contact mechanics: A comprehensive review.

Empirical joint contact mechanics measurement (EJCM; e.g. contact area or force, surface velocities) enables critical investigations of the relationship between changing joint mechanics and the impact on surface-to-surface interactions. In orthopedic biomechanics, understanding the changes to cartilage contact mechanics following joint pathology or aging is critical due to its suggested role in the increased risk of osteoarthritis (OA), which might be due to changed kinematics and kinetics that alter the contact patterns within a joint. This article reviews and discusses EJCM approaches that have been applied to articulating joints such that readers across different disciplines will be informed of the various measurement and analysis techniques used in this field. The approaches reviewed include classical measurement approaches (radiographic and sectioning, dye staining, casting, surface proximity, and pressure measurement), stereophotogrammetry/motion analysis, computed tomography (CT), magnetic resonance imaging (MRI), and high-speed videoradiography. Perspectives on approaches to advance this field of EJCM are provided, including the value of considering relative velocity in joints, tractional stress, quantification of joint contact area shape, consideration of normalization techniques, net response (superposition) of multiple input variables, and establishing linkages to regional cartilage health status. EJCM measures continue to provide insights to advance our understanding of cartilage health and degeneration and provide avenues to assess the efficacy and guide future directions of developing interventions (e.g. surgical, biological, rehabilitative) to optimize joint's health and function long term.

Validation of a magnetic resonance imaging based method to study passive knee laxity: An in-situ study.

Knee laxity can be described as an increased anterior tibial translation (ATT) or decreased stiffness of the tibiofemoral joint under an applied force. Küpper et al. (2013, 2016) and Westover et al. (2016) previously developed and reported on a magnetic resonance (MR)-based in vivo measure of knee laxity. In this study, the application of an in situ knee loading apparatus (ISKLA) is presented as a step toward validating the MR-based methodology for measuring ATT and stiffness. The ISKLA is designed to measure these outcome variables using MR imaging and is validated against a gold-standard ElectroForce mechanical test instrument (TA Instruments 3550). Accuracy was assessed through an in situ experimental setup by testing four cadaveric specimens with both the MR-based methodology and in the ElectroForce system. The outcome of the current study showed that the MR-based ATTs and stiffness measurements using the ISKLA were within 1.44-2.10 mm and 0.16-6.14 N/mm, respectively, of the corresponding values measured by the gold standard system. An excellent ICC was observed for ATT (0.97) and good ICC for stiffness (0.87) between the MR and ElectroForce-based systems across all target force levels. These findings suggest that the MR-based approach can be used with satisfactory accuracy and correlation to the gold standard measure.

Vertical Drop Jump Biomechanics of Patients With a 3- to 10-Year History of Youth Sport-Related Anterior Cruciate Ligament Reconstruction.

BACKGROUND: A better understanding of movement biomechanics after anterior cruciate ligament reconstruction (ACLR) could inform injury prevention, knee injury rehabilitation, and osteoarthritis prevention strategies. PURPOSE: To investigate differences in vertical drop jump (VDJ) biomechanics between patients with a 3- to 10-year history of youth sport-related ACLR and uninjured peers of a similar age, sex, and sport. STUDY DESIGN: Cross-sectional study. Level of evidence III. METHODS: Lower limb kinematics and bilateral ground-reaction forces (GRFs) were recorded for participants performing 10 VDJs. Joint angles and GRF data were analyzed, and statistical analysis was performed using 2 multivariate models. Dependent variables included sagittal (ankle, knee, and hip) and coronal (knee and hip) angles at initial contact and maximum knee flexion, the rate of change of coronal knee angles (35%-90% of the support phase; ie, slopes of linear regression lines), and vertical and mediolateral GRFs (normalized to body weight [BW]). Fixed effects included group, sex, and time since injury. Participant clusters, defined by sex and sport, were considered as random effects. RESULTS: Participants included 48 patients with a history of ACLR and 48 uninjured age-, sex-, and sport-matched controls (median age, 22 years [range, 18-26 years]; 67% female). Patients with ACLR demonstrated steeper negative coronal knee angle slopes (ß = -0.04 deg/% [95% CI, -0.07 to -0.00 deg/%]; P = .025). A longer time since injury was associated with reduced knee flexion (ß = -0.2° [95% CI, -0.3° to -0.0°]; P = .014) and hip flexion (ß = -0.1° [95% CI, -0.2° to -0.0°]; P = .018). Regardless of ACLR history, women displayed greater knee valgus at initial contact (ß = 2.1° [95% CI, 0.4° to 3.8°]; P = .017), greater coronal knee angle slopes (ß = 0.05 deg/% [95% CI, 0.02 to 0.09 deg/%]; P = .004), and larger vertical GRFs (landing: ß = -0.34 BW [95% CI, -0.61 to -0.07 BW]; P = .014) (pushoff: ß = -0.20 BW [95% CI, -0.32 to -0.08 BW]; P = .001). CONCLUSION: Women and patients with a 3- to 10-year history of ACLR demonstrated VDJ biomechanics that may be associated with knee motion control challenges. CLINICAL RELEVANCE: It is important to consider knee motion control during activities such as VDJs when developing injury prevention and rehabilitation interventions aimed at improving joint health after youth sport-related ACLR.

Effect of stochastic resonance on proprioception and kinesthesia in anterior cruciate ligament reconstructed patients.

Low amplitude mechanical noise vibration has been shown to improve somatosensory acuity in various clinical groups with comparable deficiencies through a phenomenon known as Stochastic Resonance (SR). This technology showed promising outcomes in improving somatosensory acuity in other clinical patients (e.g., Parkinson's disease and osteoarthritis). Some degree of chronic somatosensory deficiency in the knee has been reported following anterior cruciate ligament (ACL) reconstruction surgery. In this study, the effect of the SR phenomenon on improving knee somatosensory acuity (proprioception and kinesthesia) in female ACL reconstructed (ACLR) participants (n = 19) was tested at three months post-surgery, and the results were compared to healthy controls (n = 28). Proprioception was quantified by the measure of joint position sense (JPS) and kinesthesia with the threshold to detection of passive movement (TDPM). The results based on the statistical analysis demonstrated an overall difference between the somatosensory acuity in the ACLR limb compared to healthy controls (p = 0.007). A larger TDPM was observed in the ACLR limb compared to the healthy controls (p = 0.002). However, the JPS between the ACLR and healthy limbs were not statistically significantly different (p = 0.365). SR significantly improved JPS (p = 0.006) while the effect was more pronounced in the ACLR cohort. The effect on the TDPM did not reach statistical significance (p = 0.681) in either group. In conclusion, deficient kinesthesia in the ACLR limb was observed at three months post-surgery. Also, the positive effects of SR on somatosensory acuity in the ACL reconstructed group warrant further investigation into the use of this phenomenon to improve proprioception in ACLR and healthy groups.

Error reduction in the finite helical axis for knee kinematics.

Traditionally the FHA is calculated stepwise between data points (sFHA), requiring down sampling to achieve a sufficiently large step size to minimize error. This paper proposes an alternate FHA calculation approach (rFHA), using a unique reference position to reduce error associated with small rotation angles. This study demonstrated error reduction using the rFHA approach relative to the sFHA approach. Furthermore, the rFHA in the femur is defined at each time point providing a continuous representation of joint motion. These characteristics enable the rFHA to quantify small differences in knee joint motion, providing an excellent measure to quantify knee joint stability.

Time series spinal radiographs as prognostic factors for scoliosis and progression of spinal deformities.

The effectiveness of clinical measures to predict scoliotic progression is unclear. The objective of this study was to identify potential prognostic factors affecting scoliosis progression. Consecutive measurements (181) from 35 non-instrumented adolescent idiopathic scoliosis patients with at least two follow-up assessments were studied. Potential prognostic factors of gender, curve pattern, age, curve magnitude, apex location and lateral deviation and spinal growth were analyzed. Stable and progressed groups were compared (threshold: Cobb angle ≥5° or 10°) with sequential clinical data collected in 6-month intervals. Double curves progressed simultaneously or alternatively on curve regions. Age was not significantly different prior to and at maximal Cobb angle. Maximal Cobb angles were significantly correlated to initial Cobb angles (r = 0.81-0.98). Progressed males had larger initial Cobb angles than progressed females. Apex locations were higher in progressed than stable groups, and at least a half vertebra level higher in females than males. Maximal apex lateral deviations correlated significantly with the initial ones (r = 0.73-0.97) and moderately with maximal Cobb angles (r = 0.33-0.85). In the progressed groups, males had larger apex lateral deviations than females. Spinal growth did not relate to curve progression (r = -0.64 to +0.59) and was not significantly different between groups and genders. Scoliosis may dynamically progress between major and minor curves. Gender, curve magnitude, apex location and lateral deviation have stronger effects on scoliosis progression than age or spinal growth. Females with high apex locations may be expected to progress.

Prediction of scoliosis progression with serial three-dimensional spinal curves and the artificial progression surface technique.

Adolescent idiopathic scoliosis (AIS) progression is clinically monitored by a series of full spinal X-rays. To decrease radiation exposure, an artificial progression surface (APS) is proposed to predict progression. Fifty-six acquisitions (posteroanterior radiographs, 0° and 20°) were obtained from 11 AIS patients (29.8 ± 9.6° Cobb angle). Three-dimensional curves were constructed through vertebral pedicle centers. Three previous serial spinal curves (6-month intervals) were used to construct an APS with a Non-uniform Rational B-Spline surfacing technique. Future progression was achieved by aligning the curves on the APS using the generalized cross-validation extrapolation technique. With three and four previous serial spinal curves, the prediction accuracies of future progression at the next 6-month interval were 4.1 ± 3.3° for Cobb angles and 3.6 ± 3.5 mm for apex lateral deviations. Apex locations and Cobb regions varied within one vertebral level. The proposed technique shows potential as an accurate three-dimensional prediction method for AIS progression and could help pediatricians make decisions about treatment. However, it could only be applied once before more radiographic data would be needed.