Development of 187Re targets for heavy ion induced reactions.

To perform nuclear reaction experiment, very good quality, uniform and thin targets are necessary. In order to carry out evaporation residue cross section measurement of 19F+187Re reaction using Hybrid Recoil mass Analyzer (HYRA) facility at Inter - University Accelerator Center (IUAC) 187Re targets of thickness 200 µg/cm2 are required. More than 20 targets of 187Re of 200 µg/cm2 thickness with thin carbon backing have been prepared using 70 mg of 187Re. Being one of the highest melting points of all elements, high temperature involved in the process and limited amount of available isotopic material are the major constraints during the target development of 187Re. The targets have been successfully used for the nuclear reaction experiment. The method used for the development of several 187Re targets with minimum material consumption and the detailed characterization techniques applied for studying the targets are discussed in detail.

Understanding the effect of irradiation temperature on microstructural evolution of 20MnMoNi55 steel.

In this study, the effect of irradiation temperature on microstructural evolution of Indian RPV steel is reported. This study, by virtue of helium ion irradiation at 77, 300 and 573 K, could bring out the effect of the irradiation induced defects on microstructural and mechanical property changes at different stages of their existence starting from the state of cascade damage till the point of their free migration. Irradiation experiments were performed with varying ion energies to achieve nearly uniform irradiation damage of 0.05, 0.2 and 3 dpa in a ~ 300 nm wide region. Irradiated samples were characterized using GIXRD, PAS, TEM and nanoindentation. Unirradiated samples showed predominant presence of a combination of di- and tri-vacancy type of defects. Most of the dislocations present in unirradiated samples were screw dislocations, while mixed type was noticed upon irradiation irrespective of the irradiation temperature. PAS study showed formation of distinct defect types at different irradiation temperatures. TEM study confirmed formation of dislocation loops and defect clusters on irradiation. Higher irradiation temperatures resulted in the extension of the width of the damage region owing to increased migration of defects.

Fabrication and characterization of carbon-backed thin 208Pb targets.

Thin carbon-backed isotopically enriched 208Pb targets were required for our experiment aimed to study the reaction dynamics for 48Ti + 208Pb system, populating the near super-heavy nucleus 256Rf, through mass-energy correlation of the fission fragments. Purity and thickness of the targets are of utmost importance in such studies as these factors have strong influence on the measurement accuracy of mass and energy distribution of fission fragments. 208Pb targets with thickness ranging from 60 µg/cm2 to 250 µg/cm2 have been fabricated in high vacuum environment using physical vapor deposition method. Important points in the method are as follows: •208Pb was deposited using resistive heating method, whereas carbon (backing foil) deposition was performed by using the electron beam bombardment technique.•Different characterization techniques such as Particle Induced X-ray Emission (PIXE), Energy Dispersive X-Ray Fluorescence (EDXRF) and Rutherford Backscattering Spectrometry (RBS) were used to assert the purity and thickness of the targets.•These targets have successfully been used to accomplish our experimental objectives.

Unraveling The Origin of Enhanced Field Emission from Irradiated FeCo-SiO2 Nanocomposites: A Combined Experimental and First-Principles Based Study.

This work is driven by the vision of engineering planar field emitters with ferromagnetic metal-insulator nanocomposite thin films, using swift heavy ion (SHI) irradiation method. FeCo nanoparticles inside SiO2 matrix, when subjected to SHI get elongated. Using this, we demonstrate here a planar field emitter with maximum current density of 550 µA/cm(2) at an applied field of 15 V/µm. The film, irradiated with 5 × 10(13) ions/cm(2) fluence (5e13) of 120 MeV Au(9+) ions, shows very high electron emitting quantum efficiency in comparison to its unirradiated counterpart. Surface enhanced Raman spectroscopy analysis of unirradiated and 5e13 films further confirms that the field emission (FE) enhancement is not only due to surface protrusions but also depends on the properties of entire matrix. We find experimental evidence of enhanced valence band density of states (VB DOS) for 5e13 film from XPS, which is verified in the electronic structure of a model FeCo cluster from first-principles based calculations combining density functional theory (DFT) and molecular dynamics (MD) simulations. The MD temperature is selected from the lattice temperature profile inside nanoparticles as deduced from thermal spike model. Increasing the irradiation fluence beyond 5e13, results in reduced VB DOS and melting of surface protrusions, thus causing reduction of FE current density. We finally conclude from theoretical analysis that change in fluence alters the co-ordination chemistry followed by the charge distribution and spin alignment, which influence the VB DOS and concurrent FE as evident from our experiment.

Synthesis of plasmonic nanocomposites for diverse applications.

We report the synthesis of gold and silver nanostructures embedded in different dielectric matrices by atom beam co-sputtering, a novel technique. We have synthesized gold-silicon core shell nanostructures and Au-ZnO nanocomposite with tunable surface plasmon resonance (SPR) by atom beam co-sputtering and subsequent annealing. The Au-ZnO nanocomposite shows significant enhancement in intensity of Raman modes of fullerene molecules and therefore can help in surface enhanced Raman spectroscopy investigation of organic molecules. The synthesized Ag-polymer nanocomposite thin films show excellent features of broad SPR absorption extending upto IR region and a narrow transmission of light in UV region approximately 320 nm which could be of technological interest in solar absorbers and UV light filters respectively. The Ag-silica nanocomposite thin films show their utility in glucose sensing. The gold-silica nanocomposite thin films exhibit their possible use in detection of human ovarian cancer cells in a preliminary study. The shift in SPR peak of Au nanoparticles (NPs) present at the surface of silica synthesized by thermal evaporation and annealing, after attachment of biological molecules like proteins has been studied.

Development of Ge nanoparticles embedded in GeO2 matrix.

Germanium (Ge) nanoparticles have attracted a lot of attention due to their excellent optical properties. In this paper, we report on the formation of Ge nanoparticles embedded in GeO2 matrix prepared by electron beam evaporation and subsequent annealing. Transmission electron microscopy (TEM) studies clearly indicate the formation of Ge nanocrystals in the films annealed at 500 degrees C. Fourier transform infrared (FTIR) spectroscopic studies are carried out to verify the evolution of the structure after annealing at each stage. Micro-Raman analysis also confirms the formation of Ge nanoparticles in the annealed films. Development of Ge nanoparticles is also established by photoluminescence (PL) analysis. Surface morphology study is carried out by atomic force microscopy (AFM). It shows the evolution of granular structure of the films with increasing annealing temperature.

KeV ion-induced effective surface modifications on InP.

In the present study, we have analyzed the changes in surface morphology leading to formation of periodic structures known as ripples which arise due to an interplay between sputtering and surface diffusion. The 1.5 keV Ar atoms with a flux of 14.8 mA/cm2 are used in the present study. The InP(100) samples were bombarded at an incidence angle of 45 degrees to the normal at a base pressure of 1 x 10(-6) Torr at room temperature with fluences varying from 4 x 10(16) to 3.2 x 10(17) atoms/cm2. The rippled InP(100) surface was characterized with AFM. An increase in the ripple wavelengths, from 60 nm to 150 nm with the fluence has been observed. The width of the ripples varies from 38 nm to 128 nm and ripple amplitude varies from 0.8 nm to 16 nm with increasing fluence. One can control the dimension of the ripples in nano scale by controlling the fluence. Scaling studies have been performed to understand the mechanism responsible for such kind of surface evolution. The roughness parameter, alpha was found to be between 0.65 to 0.75 and the growth parameter, beta, as 1.14 +/- 0.12. The XPS characterization has also been employed to study the changes in the behavior of the InP with varying fluence.

Surface plasmon resonance of Ag nanoparticles embedded in partially oxidized amorphous Si matrix.

Nanocomposite films containing Ag nanoparticles embedded in partially oxidized amorphous Si matrix were deposited on silica glass substrates by co-sputtering of Ag and Si with 1.5 keV neutral Ar atoms. The Ag content and thickness of the nanocomposite films was determined by Rutherford backscattering spectrometry. Optical absorption studies revealed the presence of surface plasmon resonance (SPR) indicating the formation of Ag nanoparticles in the as-deposited films. The position, width and strength of SPR have been found to be strongly dependent on the Ag content of the films. For annealing in oxidizing atmosphere, a significant red shift in the SPR along with a drastic reduction in the resonant absorption has been observed. The amount of red shift has been found to be dependent on the Ag content of the films. Transmission electron microscopy was used to study the size distribution, shape and crystal structure of Ag nanoparticles in the nanocomposite films. TEM analysis of annealed sample revealed the formation of silver oxide nanoshells surrounding Ag nanoparticles.

Synthesis and characterization of gold nanorings.

In the present work, we report the formation of Au nanorings on quartz substrate by thermal evaporation of Au on quartz and subsequent annealing in certain conditions as a function of metal volume fraction and annealing temperature. Optical extinction cross-sections measurements and atomic force microscopy (AFM) studies have been performed on the as-deposited and annealed samples. No signature of nanoparticles formation is found in case of as-deposited samples, while spectra of annealed samples show a clear signature of surface plasmon resonance absorption (SPR) peaks around 580 nm, which reveals the formation of Au nanostructure. AFM images clearly show the formation of Au nanorings under certain conditions. The observed SPR frequency of the Au nanorings in our case is in agreement with the estimated frequency obtained from the formulation of Aizpurua et al. Optical extinction measurements at different incidence angles were performed, which showed splitting of SPR at angles beyond 20 degrees.